The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for loading.
|
|
Loading needs for spatial and/or surveying site work are identified and located according to instructions from appropriate personnel. Completed |
Evidence:
|
Loading and unloading plans are followed to ensure efficient and safe operations. Completed |
Evidence:
|
Characteristics of the load are taken into account to ensure that the distribution is even, legal and within safe working capacity. Completed |
Evidence:
|
Skills and knowledge are updated to accommodate changes in equipment and operations. Completed |
Evidence:
|
Manage load.
|
|
Goods are loaded according to relevant mass and loading regulations and workplace procedures. Completed |
Evidence:
|
Lifting aids and appliances are selected and used to assist loading procedures, according to workplace procedures and applicable regulations and legislation. Completed |
Evidence:
|
Load is secured using the correct load restraint and protection equipment. Completed |
Evidence:
|
Load is protected according to legal and workplace OHS requirements. Completed |
Evidence:
|
Loading and unloading activities are conducted in a safe and efficient manner taking into account suitable locations, stowage, safe use of equipment and balance of the remaining load. Completed |
Evidence:
|
Goods requiring special handling or documentation are identified and appropriate procedures are followed. Completed |
Evidence:
|
Personal protective equipment is used according to organisational guidelines. Completed |
Evidence:
|
Maintain awareness of driving conditions.
|
|
Traffic flowand work area conditions are constantly monitored and anticipated to allow for safe, injury-free and damage-free operations. Completed |
Evidence:
|
Most efficient and safe route of travel is selected by monitoring and anticipating traffic flow, weather conditions, road standards and any other factors likely to cause delays, route deviations, injury to people or damage to equipment, loads and facilities. Completed |
Evidence:
|
Any occurrence in the work area that may affect the safety and efficiency of operations is reported to the appropriate personnel. Completed |
Evidence:
|
Manage vehicle efficiency.
|
|
Vehicle performance is maintained through pre-operational inspections and checks. Completed |
Evidence:
|
Performance and efficiency of vehicle operation are monitored during use. Completed |
Evidence:
|
Defective or irregular performance or malfunctions are reported to the appropriate authority. Completed |
Evidence:
|
Vehicle records are maintained and updated, and information is processed according to workplace procedures. Completed |
Evidence:
|