NTISthis.com

Evidence Guide: CPPSPS4012 - Design, install, service and repair automated systems for swimming pools and spas

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

CPPSPS4012 - Design, install, service and repair automated systems for swimming pools and spas

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work.

  1. Applicable provisions of Australian standards, and legislative, manufacturer and enterprise requirements are identified and followed.
  2. Work instructions are obtained, reviewed and confirmed.
  3. Design is completed, and installation, service and/or repair requirements are confirmed in line with enterprise procedures.
  4. Designed automated system or component to be installed, serviced or repaired is identified and confirmed in line with enterprise requirements.
  5. Required tools, materials and equipment are selected and checked for correct operation and safety.
  6. Potential and existing risks and hazards in the work area are identified and controlled in line with work health and safety (WHS) and enterprise requirements.
  7. Sustainability principles are applied to work preparation and application.
Applicable provisions of Australian standards, and legislative, manufacturer and enterprise requirements are identified and followed.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work instructions are obtained, reviewed and confirmed.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Design is completed, and installation, service and/or repair requirements are confirmed in line with enterprise procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Designed automated system or component to be installed, serviced or repaired is identified and confirmed in line with enterprise requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Required tools, materials and equipment are selected and checked for correct operation and safety.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Potential and existing risks and hazards in the work area are identified and controlled in line with work health and safety (WHS) and enterprise requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Sustainability principles are applied to work preparation and application.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Design and test automated system and components for swimming pool or spa.

  1. Personal protective equipment (PPE) is selected and used.
  2. Automated system is designed in line with manufacturer requirements.
  3. Automated system or component is installed and programmed in line with relevant Australian standards and manufacturer, client and enterprise requirements.
  4. Installation work is coordinated with relevant licensed personnel as required.
  5. Automated system or component is tested and validated in line with manufacturer specifications.
Personal protective equipment (PPE) is selected and used.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Automated system is designed in line with manufacturer requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Automated system or component is installed and programmed in line with relevant Australian standards and manufacturer, client and enterprise requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Installation work is coordinated with relevant licensed personnel as required.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Automated system or component is tested and validated in line with manufacturer specifications.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Service automated system.

  1. Service and maintenance requirements are identified from manufacturer specifications.
  2. Replacement components are checked and fitted in line with manufacturer specifications.
  3. Automated system is serviced in line with manufacturer instructions.
Service and maintenance requirements are identified from manufacturer specifications.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Replacement components are checked and fitted in line with manufacturer specifications.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Automated system is serviced in line with manufacturer instructions.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Troubleshoot faults in automated system.

  1. Logical processes, including the application of basic principles, system knowledge and experience, are used in conjunction with technical manuals to ensure efficient and accurate troubleshooting of faults.
  2. Defects are located and causes of defects are identified and recorded in maintenance documentation, including where required, any other systems disturbed.
  3. Specialist advice is obtained, where required and available, to assist with the troubleshooting process.
  4. Components are repaired or replaced in line with manufacturer instructions.
  5. Repair work is coordinated with relevant licensed personnel as required.
  6. Appropriate personnel are sourced to undertake repairs or replacement activities that are outside scope of own expertise, require specialist skills or equipment, or must be performed by licensed personnel.
  7. Fault finding and repair or replacement activities are carried out using sustainability practices and without unnecessary waste of materials or damage to equipment and the surrounding environment or services.
  8. Automated system is commissioned in line with manufacturer specifications.
Logical processes, including the application of basic principles, system knowledge and experience, are used in conjunction with technical manuals to ensure efficient and accurate troubleshooting of faults.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Defects are located and causes of defects are identified and recorded in maintenance documentation, including where required, any other systems disturbed.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Specialist advice is obtained, where required and available, to assist with the troubleshooting process.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Components are repaired or replaced in line with manufacturer instructions.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair work is coordinated with relevant licensed personnel as required.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate personnel are sourced to undertake repairs or replacement activities that are outside scope of own expertise, require specialist skills or equipment, or must be performed by licensed personnel.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fault finding and repair or replacement activities are carried out using sustainability practices and without unnecessary waste of materials or damage to equipment and the surrounding environment or services.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Automated system is commissioned in line with manufacturer specifications.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete installation, repair and service activities.

  1. Automated system is installed or reinstated to operational condition in line with work instructions.
  2. Work area is restored to original condition and checked for safety hazards, waste is disposed of, and tools and equipment are cleaned and stored.
  3. Malfunctions, faults, wear or damage to swimming pool or spa automated system, environs, tools and equipment are reported for repair or replacement.
  4. Notification of work completion is made in line with enterprise procedures.
  5. Information is provided to clients on compliance of swimming pool or spa and environs with safety legislation.
  6. Relevant documentation is completed and securely maintained.
Automated system is installed or reinstated to operational condition in line with work instructions.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is restored to original condition and checked for safety hazards, waste is disposed of, and tools and equipment are cleaned and stored.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Malfunctions, faults, wear or damage to swimming pool or spa automated system, environs, tools and equipment are reported for repair or replacement.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Notification of work completion is made in line with enterprise procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Information is provided to clients on compliance of swimming pool or spa and environs with safety legislation.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Relevant documentation is completed and securely maintained.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1.

Prepare for work.

1.1.

Applicable provisions of Australian standards, and legislative, manufacturer and enterprise requirements are identified and followed.

1.2.

Work instructions are obtained, reviewed and confirmed.

1.3.

Design is completed, and installation, service and/or repair requirements are confirmed in line with enterprise procedures.

1.4.

Designed automated system or component to be installed, serviced or repaired is identified and confirmed in line with enterprise requirements.

1.5.

Required tools, materials and equipment are selected and checked for correct operation and safety.

1.6.

Potential and existing risks and hazards in the work area are identified and controlled in line with work health and safety (WHS) and enterprise requirements.

1.7.

Sustainability principles are applied to work preparation and application.

2.

Design and test automated system and components for swimming pool or spa.

2.1.

Personal protective equipment (PPE) is selected and used.

2.2.

Automated system is designed in line with manufacturer requirements.

2.3.

Automated system or component is installed and programmed in line with relevant Australian standards and manufacturer, client and enterprise requirements.

2.4.

Installation work is coordinated with relevant licensed personnel as required.

2.5.

Automated system or component is tested and validated in line with manufacturer specifications.

3.

Service automated system.

3.1.

Service and maintenance requirements are identified from manufacturer specifications.

3.2.

Replacement components are checked and fitted in line with manufacturer specifications.

3.3.

Automated system is serviced in line with manufacturer instructions.

4.

Troubleshoot faults in automated system.

4.1.

Logical processes, including the application of basic principles, system knowledge and experience, are used in conjunction with technical manuals to ensure efficient and accurate troubleshooting of faults.

4.2.

Defects are located and causes of defects are identified and recorded in maintenance documentation, including where required, any other systems disturbed.

4.3.

Specialist advice is obtained, where required and available, to assist with the troubleshooting process.

4.4.

Components are repaired or replaced in line with manufacturer instructions.

4.5.

Repair work is coordinated with relevant licensed personnel as required.

4.6.

Appropriate personnel are sourced to undertake repairs or replacement activities that are outside scope of own expertise, require specialist skills or equipment, or must be performed by licensed personnel.

4.7.

Fault finding and repair or replacement activities are carried out using sustainability practices and without unnecessary waste of materials or damage to equipment and the surrounding environment or services.

4.8.

Automated system is commissioned in line with manufacturer specifications.

5.

Complete installation, repair and service activities.

5.1.

Automated system is installed or reinstated to operational condition in line with work instructions.

5.2.

Work area is restored to original condition and checked for safety hazards, waste is disposed of, and tools and equipment are cleaned and stored.

5.3.

Malfunctions, faults, wear or damage to swimming pool or spa automated system, environs, tools and equipment are reported for repair or replacement.

5.4.

Notification of work completion is made in line with enterprise procedures.

5.5.

Information is provided to clients on compliance of swimming pool or spa and environs with safety legislation.

5.6.

Relevant documentation is completed and securely maintained.

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1.

Prepare for work.

1.1.

Applicable provisions of Australian standards, and legislative, manufacturer and enterprise requirements are identified and followed.

1.2.

Work instructions are obtained, reviewed and confirmed.

1.3.

Design is completed, and installation, service and/or repair requirements are confirmed in line with enterprise procedures.

1.4.

Designed automated system or component to be installed, serviced or repaired is identified and confirmed in line with enterprise requirements.

1.5.

Required tools, materials and equipment are selected and checked for correct operation and safety.

1.6.

Potential and existing risks and hazards in the work area are identified and controlled in line with work health and safety (WHS) and enterprise requirements.

1.7.

Sustainability principles are applied to work preparation and application.

2.

Design and test automated system and components for swimming pool or spa.

2.1.

Personal protective equipment (PPE) is selected and used.

2.2.

Automated system is designed in line with manufacturer requirements.

2.3.

Automated system or component is installed and programmed in line with relevant Australian standards and manufacturer, client and enterprise requirements.

2.4.

Installation work is coordinated with relevant licensed personnel as required.

2.5.

Automated system or component is tested and validated in line with manufacturer specifications.

3.

Service automated system.

3.1.

Service and maintenance requirements are identified from manufacturer specifications.

3.2.

Replacement components are checked and fitted in line with manufacturer specifications.

3.3.

Automated system is serviced in line with manufacturer instructions.

4.

Troubleshoot faults in automated system.

4.1.

Logical processes, including the application of basic principles, system knowledge and experience, are used in conjunction with technical manuals to ensure efficient and accurate troubleshooting of faults.

4.2.

Defects are located and causes of defects are identified and recorded in maintenance documentation, including where required, any other systems disturbed.

4.3.

Specialist advice is obtained, where required and available, to assist with the troubleshooting process.

4.4.

Components are repaired or replaced in line with manufacturer instructions.

4.5.

Repair work is coordinated with relevant licensed personnel as required.

4.6.

Appropriate personnel are sourced to undertake repairs or replacement activities that are outside scope of own expertise, require specialist skills or equipment, or must be performed by licensed personnel.

4.7.

Fault finding and repair or replacement activities are carried out using sustainability practices and without unnecessary waste of materials or damage to equipment and the surrounding environment or services.

4.8.

Automated system is commissioned in line with manufacturer specifications.

5.

Complete installation, repair and service activities.

5.1.

Automated system is installed or reinstated to operational condition in line with work instructions.

5.2.

Work area is restored to original condition and checked for safety hazards, waste is disposed of, and tools and equipment are cleaned and stored.

5.3.

Malfunctions, faults, wear or damage to swimming pool or spa automated system, environs, tools and equipment are reported for repair or replacement.

5.4.

Notification of work completion is made in line with enterprise procedures.

5.5.

Information is provided to clients on compliance of swimming pool or spa and environs with safety legislation.

5.6.

Relevant documentation is completed and securely maintained.

A person demonstrating competency in this unit must satisfy the requirements of the elements, performance criteria, foundation skills and range of conditions of this unit.

The person must also meet client, enterprise, and where appropriate manufacturer, requirements relating to swimming pools and spas when demonstrating safe procedures while:

designing one automated system

installing one automated system

servicing one automated systems, troubleshooting routine and complex faults

repairing one automated system or component, troubleshooting routine and complex faults.

In doing the above, the person must:

interpret work instructions

select and use personal protective equipment (PPE)

complete design, installation, repair or service according to client and enterprise requirements.

A person demonstrating competency in this unit must demonstrate knowledge of:

Australian Competition and Consumer Commission product safety guidelines

automated systems for swimming pools and spas:

purpose of system

actuator valves

basic operating principles

common faults

components

connectivity

functions

maintenance procedures

programming

scheduling and run times

sensors

types, operation, installation, commissioning and servicing of automated systems:

dosing

heating

lighting

pool and spa controllers

pool cleaning

valving

water treatment

automation:

basic principles

digital controllers

microprocessors

programmable controllers

commonwealth, state or territory legislation, and local government regulations, Australian standards, and codes of practice impacting on the design, installation, service and repair of automated systems for swimming pools and spas relating to:

dangerous goods

electrical and plumbing regulations controlling conduct of electrical and plumbing work

environmental protection

environmental health

private and public swimming pools and spas

waste disposal

work health and safety (WHS)

electronics principles relating to:

circuits

diagrams

safety

testing and test equipment

electrical safety principles

safe chemical-handling principles relating to swimming pool and spa automated systems

water testing:

equipment

parameters

techniques

test results.

Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Service and maintenance requirements must include:

adjustments

cleaning

confirming operation of system

identifying worn parts

inspecting

lubricating

programming automated systems

replacing consumable or worn parts

routine repairs

testing.

Troubleshooting must include:

identifying standard faults using relevant manuals and specifications as required

identifying from first principles faults beyond available maintenance data for automated systems for swimming pool or spa

fault finding during scheduled or unscheduled maintenance activities

individual activities or troubleshooting tasks performed during the supervision of other personnel.