The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Determine lighting requirements for productions
|
|
Confirm overall lighting requirements with reference to lighting documentation and in consultation with production personnel Completed |
Evidence:
|
Calculate power requirements and confirm power sources and locations meet production requirements Completed |
Evidence:
|
Identify patching, colour and focus requirements Completed |
Evidence:
|
Identify additional equipment or materials needed, and organise acquisition according to enterprise procedures Completed |
Evidence:
|
Prepare lighting equipment for installation
|
|
Confirm lighting equipment is safe and operational using appropriate test equipment and in line with enterprise procedures Completed |
Evidence:
|
Identify and address routine faults and repairs and refer complex matters to technical specialists in line with enterprise procedures Completed |
Evidence:
|
Prepare and assemble colour, equipment, lanterns and accessories in readiness for installation or transportation Completed |
Evidence:
|
Pre-rig lighting equipment in line with safety and licensing requirements Completed |
Evidence:
|
Prepare extension leads, looms and cables to comply with design specifications, enterprise standards and legal requirements Completed |
Evidence:
|
Install lighting
|
|
Install rigging and accessories according to legislative and enterprise safety requirements Completed |
Evidence:
|
Test, install and hang lanterns and accessories according to lighting plans, scale and manufacturer’s specifications Completed |
Evidence:
|
Install power supplies according to lighting plans, location standards, manufacturer’s specifications and safety regulations Completed |
Evidence:
|
Patch lanterns and accessories according to lighting or patch plans Completed |
Evidence:
|
Label rated cabling correctly and secure it safely, neatly and clear of any moving elements Completed |
Evidence:
|
Angle and focus lanterns according to lighting plans and artistic requirements Completed |
Evidence:
|
Check safety of equipment during and after installation in line with industry practice and legal requirements, and seek assistance if required Completed |
Evidence:
|
Install lighting control system
|
|
Connect dimmers to power, assign and turn on Completed |
Evidence:
|
Install and configure control desk and peripherals according to production requirements and required timeframes Completed |
Evidence:
|
Run and connect control cables and secure safely Completed |
Evidence:
|
Patch lanterns and channels to dimmers according to lighting or patch plan sheets, taking account of location-specific procedures and conditions Completed |
Evidence:
|
Check electrical safety
|
|
Complete installation and testing according to legislative and work health and safety (WHS) requirements Completed |
Evidence:
|
Check three-phase distribution and power calculations in collaboration with licensed electricians as required Completed |
Evidence:
|
Check and adjust according to safety standards if necessary, that power supply is sufficient for load requirements and distribution of electrical loading is within limits Completed |
Evidence:
|
Check cables used are correctly rated, including three-phase cable to dimmers, and that three-phase supplies are balanced, and adjust as required Completed |
Evidence:
|
Check cabling and connectors meet legislative and WHS requirements, and seek assistance if required Completed |
Evidence:
|
Test and adjust lighting
|
|
Test lighting, including communication system, control desk and peripherals in line with industry practice and safety requirements Completed |
Evidence:
|
Identify the need for adjustments and make modifications accordingly Completed |
Evidence:
|
Confirm lighting installation meets requirements in consultation with production personnel Completed |
Evidence:
|
Complete and update lighting documentation as required Completed |
Evidence:
|
Disassemble lighting equipment
|
|
Break down and carry lighting equipment and accessories in line with safety procedures Completed |
Evidence:
|
Clean and safely pack equipment to avoid damage and prepare for transport Completed |
Evidence:
|
Report and document equipment that is damaged or requires maintenance to relevant production personnel Completed |
Evidence:
|
Leave worksite in the original or improved condition Completed |
Evidence:
|