The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Plan and prepare to shift the load
|
|
Appropriate personal protective equipment is selected and worn in accordance with OH&S requirements Completed |
Evidence:
|
Job instructions are used to identify the type of load, safe working load and working load limits, and the distance and/or height to be moved Completed |
Evidence:
|
Load is examined to determine condition, length, bulk, weight, most appropriate method to shift the load and resources required Completed |
Evidence:
|
Any damage to load is recorded and reported to supervisor Completed |
Evidence:
|
A movement plan is developed, potential difficulties are identified, and the method of shifting the load and any requirement for additional personnel are approved by the supervisor Completed |
Evidence:
|
Tools, load shifting equipment and other materials are selected, checked for serviceability and any defects are reported to the supervisor Completed |
Evidence:
|
The work site is prepared to ensure sufficient clear space is available in accordance with job instructions Completed |
Evidence:
|
Shift the load
|
|
Load is broken down, where applicable, to allow handling and moving a number of single items to ensure the maximum weight of 500 kg is not exceeded Completed |
Evidence:
|
Mechanical strapping equipment and other securing devices are used, when applicable, to stabilise the load, in accordance with manufacturer's and job instructions Completed |
Evidence:
|
Where applicable, the load is slung/unslung, using the correct securing devices, in accordance with national standards, safety codes and operational instructions Completed |
Evidence:
|
Mechanical aids and field machines are constructed, when required, by the approved shifting method, so that the load can be shifted in accordance with job instructions Completed |
Evidence:
|
Safe working limits for lifting equipment are identified and maintained Completed |
Evidence:
|
Load is moved safely in accordance with approved shifting method and steadied by tag lines, if required, and stored and stacked in relocated position Completed |
Evidence:
|
Any part of the load that is damaged during the lift is reported to the supervisor in accordance with standard procedures Completed |
Evidence:
|
Refurbish equipment and work site
|
|
Site is cleaned and cleared of debris and unwanted material Completed |
Evidence:
|
Field machines, tools and equipment are cleaned, inspected, serviced, maintained and stored in accordance with standard procedures Completed |
Evidence:
|
Documentation is completed in accordance with standard procedures Completed |
Evidence:
|