NTISthis.com

Evidence Guide: DEFCA307B - Assist in the preparation, construction and maintenance of roads and tracks

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

DEFCA307B - Assist in the preparation, construction and maintenance of roads and tracks

What evidence can you provide to prove your understanding of each of the following citeria?

Plan and prepare for construction

  1. Appropriate personal protective equipment is selected and worn in accordance with OH&S requirements
  2. Tools and equipment required for the job are selected, checked for serviceability and any faults are reported to the supervisor
  3. The road/track line is laid out and cleared of vegetation and obstructions in accordance with standard procedures and job instructions
Appropriate personal protective equipment is selected and worn in accordance with OH&S requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Tools and equipment required for the job are selected, checked for serviceability and any faults are reported to the supervisor

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

The road/track line is laid out and cleared of vegetation and obstructions in accordance with standard procedures and job instructions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Construct road/track sub-base

  1. Soil is removed manually or with the assistance of plant support to establish a base of suitable width, slope and stability
  2. Soil and waste removal is coordinated with plant operators and dumped or stored in accordance with standard procedures
  3. Soil is compacted or stabilised chemically or mechanically with the assistance of plant support
  4. Provision for drainage and crossing points is progressively made in accordance with standard procedures
Soil is removed manually or with the assistance of plant support to establish a base of suitable width, slope and stability

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Soil and waste removal is coordinated with plant operators and dumped or stored in accordance with standard procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Soil is compacted or stabilised chemically or mechanically with the assistance of plant support

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Provision for drainage and crossing points is progressively made in accordance with standard procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Construct road/track surface and drainage

  1. Road/track base and other surface materials such as pierced steel plank (PSP) and locally won expedient materials are transferred, spread, compacted and laid/fixed to meet the planned road/track design in accordance with standard procedures
  2. Drains are provided and water run-off is established
Road/track base and other surface materials such as pierced steel plank (PSP) and locally won expedient materials are transferred, spread, compacted and laid/fixed to meet the planned road/track design in accordance with standard procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Drains are provided and water run-off is established

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Construct crossings

  1. Road/track surface is cut and prepared at crossing point using appropriate compaction
  2. Culverts are installed as required in accordance with the predicted volume of water
  3. Pipes or cords are placed and correctly backfilled and compacted
Road/track surface is cut and prepared at crossing point using appropriate compaction

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Culverts are installed as required in accordance with the predicted volume of water

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Pipes or cords are placed and correctly backfilled and compacted

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Maintain road/track and refurbish work site

  1. Condition of road/track is monitored in relation to volume of traffic, loads and expected future requirements
  2. Damage likely to lead to safety or environmental issues is identified and repaired or immediately reported to supervisor
  3. Normal wear and tear damage repair is planned and carried out with minimal disruption to other activities
  4. Ineffective drainage is identified and modified as required
Condition of road/track is monitored in relation to volume of traffic, loads and expected future requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Damage likely to lead to safety or environmental issues is identified and repaired or immediately reported to supervisor

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Normal wear and tear damage repair is planned and carried out with minimal disruption to other activities

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Ineffective drainage is identified and modified as required

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessment must confirm the ability to assist in the preparation, construction and maintenance of a number of lengths of road/track using a combination of locally won and pre-fabricated materials such as PSP. The road/track construction must include the installation of drainage and crossings.

Assessment must also confirm the ability to:

assist in the construction of a road/track in accordance with job instructions and technical specifications

use tools, plant and equipment

construct drainage and crossings

carry out road maintenance tasks

interactively communicate and work in a team.

Consistency in performance

Competency should be demonstrated over a time frame that allows for the preparation, construction and maintenance of roads and tracks under a range of field conditions.

Context of and specific resources for assessment

Context of assessment

Competency should be assessed by observing the individual assisting in the construction of various types of roads and tracks using a range of materials in accordance with standard procedures.

Specific resources for assessment

Access to:

road and track construction materials relevant to the task

hand tools, power tools, plant and other equipment appropriate to the construction process

suitable site/work/training areas for the construction of roads and tracks.

Required Skills and Knowledge

This describes the essential skills and knowledge and their level, required for this unit.

Required Skills

interpret job instructions and plans, maps and overlays

use power tools, hand tools, small plant and other engineering equipment

measure relative to the construction process

utilise expedient and improvised construction methods and materials

follow instructions/directives and report information

encourage other team members

use a variety of verbal and non-verbal communication techniques including language style, active listening

read and interpret job instructions, procedures manuals, job guides, field engineering pamphlets, technical specifications and manufacturer's specifications

Required Knowledge

workplace and equipment safety requirements

capabilities of small plant and equipment

materials handling and storage

expedient and improvised construction methods

techniques for supporting others

composition of teams and roles and responsibilities of team members

verbal and non-verbal communication techniques including language style, active listening

basic numeracy required to determine linear measurement, and number and placement of pegs

Range Statement

The Range Statement relates to the Unit of Competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below.

Field conditions may include

A range of terrain, soil and vegetation

Under all weather conditions

By day or night and under illumination

Personal protective equipment may include

Boots

Safety glasses/goggles

Ear plugs/muffs

Dust masks/respirators

Gloves

Hard hat

Cap

High visibility vest

OH&S requirements may include

Workplace environment and safety

Use of protective clothing and equipment

Manual handling of materials

Tools and equipment used in construction may include

Hand and power tools

Small plant equipment supplemented, when required and available, by medium/heavy road construction plant and operators

Fabricated and pre-fabricated materials for surfaces and culverts

Equipment and non-equipment bridging

Laying out of road/track line may include

Line of sight

Pegs

Marking/blazing trees

String

Clearance of road line may include

Felling trees

Pulling stumps

Shifting rocks

Standard procedures and instructions refer to

Written and verbal orders and instructions, job instructions

Standing orders, routine orders, procedures manuals, job guides, field engineering pamphlets and other publications

Technical specifications and manufacturer's specifications

Road/track base and surface materials may include

Crushed rock

Sand

Other materials typically used for road/track construction

Expedient surfacing materials won locally

Pierced steel plank (PSP)

Pierced aluminium plank (PAP)

Trackway

Cords and pipes

Sandbags

Pre-fabricated culveting

Road/track base design requirements include

Length

Width

Depth

Camber