NTISthis.com

Evidence Guide: DEFPE004A - Assist in the construction and maintenance of a non-permanent bulk fuel installation

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

DEFPE004A - Assist in the construction and maintenance of a non-permanent bulk fuel installation

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for construction

  1. Installation instructions, including schematic diagrams, are received and confirmed with supervisor
  2. Equipment is selected and inspected for serviceability prior to construction
  3. Safety equipment is set-up prior to commencement of construction
  4. Work health and safety (WHS) requirements and recognised safety precautions are applied throughout the operation in accordance with standard procedures
  5. Environmentally sustainable work practices are identified, assessed and implemented where feasible
Installation instructions, including schematic diagrams, are received and confirmed with supervisor

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment is selected and inspected for serviceability prior to construction

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Safety equipment is set-up prior to commencement of construction

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work health and safety (WHS) requirements and recognised safety precautions are applied throughout the operation in accordance with standard procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Environmentally sustainable work practices are identified, assessed and implemented where feasible

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Construct field bulk fuel installations

  1. Storage tanks are positioned in accordance with schematic diagrams and orders
  2. Manifold system is constructed in accordance with workplace procedures and schematic diagram
  3. Problems encountered during construction process are rectified within scope of own authority or reported to supervisor
  4. Installation is pressure tested and commissioned in accordance with supervisor's instructions and workplace procedures
  5. Site is refurbished in accordance with workplace procedures
Storage tanks are positioned in accordance with schematic diagrams and orders

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Manifold system is constructed in accordance with workplace procedures and schematic diagram

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Problems encountered during construction process are rectified within scope of own authority or reported to supervisor

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Installation is pressure tested and commissioned in accordance with supervisor's instructions and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Site is refurbished in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain field bulk fuel installations

  1. Equipment is maintained in accordance with manufacturers' instructions and workplace procedures
  2. Housekeeping duties are performed in accordance with workplace procedures
  3. Bulk fuel storage tanks are measured and levels are recorded in accordance with workplace procedures
  4. Emergencies are responded to in accordance with workplace procedures
  5. Fuel istested for product contamination and results are recorded
  6. Contaminated product is quarantined and reported to supervisor
Equipment is maintained in accordance with manufacturers' instructions and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Housekeeping duties are performed in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Bulk fuel storage tanks are measured and levels are recorded in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Emergencies are responded to in accordance with workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Fuel istested for product contamination and results are recorded

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Contaminated product is quarantined and reported to supervisor

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessment must confirm the ability to:

assist in constructing and maintaining different types of non-permanent bulk fuel installations of different sizes and with different fuel products to be stored

work as part of a team

work remotely

Consistency in performance

Competency should be demonstrated over time to ensure the candidate is assessed across a wide variety of situations within the workplace.

Context of and specific resources for assessment

Context of assessment

Competency should be assessed in a field environment.

Specific resources for assessment

Access is required to:

workplace equipment required for the construction of non-permanent bulk fuel installations

safety equipment and personal protective equipment

specific workplace operating procedures and publications

Required Skills and Knowledge

This describes the essential skills and knowledge and their level, required for this unit.

Required Skills

control fuel spills

interpret fuel markings and panels

interpret technical diagrams and publications

Required Knowledge

dangerous goods handling procedures

first aid

fuel transfer equipment operation

functions and responsibilities of team members

hazard control methods associated with fuel products

maintenance procedures for fuel transfer systems

relevant WHS and pollution control legislation and policies

Range Statement

The Range Statement relates to the Unit of Competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below.

Schematic diagrams may include:

Bunding

Pipelines

Pumps

Safety equipment

Storage tanks

Equipment may include:

50 mm/100 mm fuel equipment including:

fittings

fuel metering equipment

pipelines and hoses

pumps

valves, vessels and tanks

Measurement instruments including:

hydrometers

thermometers

tapes

Safety equipment may include

Emergency shower/eye wash

Fire extinguishers

First aid kits

Spill kits

Manifold system may include:

Bonding

Earthing

Filters

Fittings

Pipes

Pumps

Valves

Workplace procedures may include:

Australian Standards

Briefs

Duty statements

Fire orders

Legislative requirements

Manufacturers' handbooks, industry specifications and technical instructions

WHS regulations

Organisational policies and procedures

Pollution control plan

Procedure manuals

Relevant state/territory or federal legislation

Standard Operating Procedures

Technical procedures

Written or verbal instructions

Problems encountered during construction process may include:

Damaged storage tanks and pipelines

Incorrect site selection/preparation

Insufficient equipment

Pressure testing of installation may include:

Correct earthing and bonding

Ensuring a closed system

Ensuring installation conforms to schematic diagram

Security of all components, fittings and fasteners

Testing installation for leaks

Commissioning of installation may include:

Receipting fuel

Testing fuel

Testing installation for serviceability

Housekeeping duties may include:

Inspecting bulk fuel installation for leaks

Inspecting integrity of earthing and bonding

Testing fuel for product contamination must include:

Appearance

Particulate

Water