NTISthis.com

Evidence Guide: FDFSUG218A - Operate a boiler - basic

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

FDFSUG218A - Operate a boiler - basic

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare the boiler for operation

  1. Health and safety hazards / maintenance requirements are identified and reported to appropriate personnel according to workplace reporting procedures
  2. The boiler is purged according to workplace procedure
  3. Services are confirmed and available
  4. Pre-operational checks are conducted to confirm operational status of boiler and related equipment
Health and safety hazards / maintenance requirements are identified and reported to appropriate personnel according to workplace reporting procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

The boiler is purged according to workplace procedure

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Services are confirmed and available

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Pre-operational checks are conducted to confirm operational status of boiler and related equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Start and monitor boiler operation

  1. 2.1 The boiler is started and brought on line safely according to workplace procedures and manufacturer's specifications
  2. 2.2 Plant is operated within limits of manufacturer's specifications to meet workplace requirements
  3. Equipment is monitored to confirm operating condition
  4. Water quality is tested and adjusted as required
  5. Sluice water is circulated to remove ash from boiler according to duty requirements
  6. The workplace meets housekeeping standards
2.1 The boiler is started and brought on line safely according to workplace procedures and manufacturer's specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

2.2 Plant is operated within limits of manufacturer's specifications to meet workplace requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment is monitored to confirm operating condition

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Water quality is tested and adjusted as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Sluice water is circulated to remove ash from boiler according to duty requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

The workplace meets housekeeping standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Analyse and respond to abnormal performance

  1. Operating data and plant operating conditions are analysed to identify causes of abnormal performance
  2. Corrective action is taken in accordance with workplace procedures in response to Hazards, out-of-specification test results and/or plant performance
  3. 3.3 Emergency procedures are implemented as required according to workplace procedures and manufacturer's recommendations
Operating data and plant operating conditions are analysed to identify causes of abnormal performance

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Corrective action is taken in accordance with workplace procedures in response to Hazards, out-of-specification test results and/or plant performance

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

3.3 Emergency procedures are implemented as required according to workplace procedures and manufacturer's recommendations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Handover boiler operations

  1. Workplace records are maintained in accordance with statutory requirements and workplace procedures
  2. Handover is carried out according to workplace procedure
  3. Boiler operators are aware of boiler status and related equipment at completion of handover
Workplace records are maintained in accordance with statutory requirements and workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Handover is carried out according to workplace procedure

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Boiler operators are aware of boiler status and related equipment at completion of handover

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Carry out an operational shutdown

  1. 5.1 The boiler is shut down according to workplace procedures and manufacturer's recommendations
  2. Maintenance requirements are identified and reported according to workplace reporting procedure
5.1 The boiler is shut down according to workplace procedures and manufacturer's recommendations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintenance requirements are identified and reported according to workplace reporting procedure

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Shutdown the boiler and prepare for an internal inspection

  1. 6.1 The boiler is shut down according to workplace procedures and manufacturer's recommendations
  2. 6.2 The boiler is cleaned internally and externally according to workplace procedures and manufacturer's recommendations
  3. Valves and fittings are removed in preparation for maintenance
6.1 The boiler is shut down according to workplace procedures and manufacturer's recommendations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

6.2 The boiler is cleaned internally and externally according to workplace procedures and manufacturer's recommendations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Valves and fittings are removed in preparation for maintenance

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Store boiler in shutdown mode

  1. 7.1 The boiler is stored in the appropriate storage mode according to workplace procedures and manufacturer's recommendations
7.1 The boiler is stored in the appropriate storage mode according to workplace procedures and manufacturer's recommendations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Record information

  1. Workplace information is recorded according to workplace recording requirements
Workplace information is recorded according to workplace recording requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Assessment must be carried out in a manner that recognises the cultural and literacy requirements of the assessee and is appropriate to the work performed.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of ability to:

confirm status of boiler and related equipment including the fuel supply system, ash removal and services

demonstrate purge procedure

conduct pre-start checks

liaise with other work areas to advise of boiler status

demonstrate set up and start up procedures in both manual and automatic modes

conduct water quality test

take corrective action in response to out-of-specification results

report and/or record corrective action

demonstrate emergency procedures and related re-start.

Context of and specific resources for assessment

Assessment must occur in a real or simulated workplace where the assessee has access to:

Boiler and related equipment. This includes fuel supply, grate cleaning and ash removal systems

Relevant codes and standards

Operating procedures and related advice on equipment operation

Personal protective clothing and equipment

Communication systems and equipment

Housekeeping standards and procedures

Workplace information recording systems, requirements and procedures.

Method of assessment

Other units of competency relevant to the work role should be assessed in conjunction with this unit. This may include:

FDFOP2030A Operate a process control interface

Guidance information for assessment

To ensure consistency in one's performance, competency should be demonstrated on more than one occasion over a period of time in order to cover a variety of circumstances, cases and responsibilities, and where possible, over a number of assessment activities.

Required Skills and Knowledge

Required skills include:

Ability to:

access workplace information on combustion and operating requirements

select, fit and use personal protective clothing and/or equipment

identify and report hazards and potential hazards in the work area

confirm status of boiler and related equipment including the fuel supply system, ash removal and services

demonstrate purge procedure

conduct pre-start checks including checking:

feed water supply and system

fuel supply system

fans and dampers

inspection doors

boiler valves - operation and position

combustion air supply system

boiler water level

liaise with other work areas to advise of boiler status

demonstrate set-up and start-up procedures in both manual and automatic modes

monitor boiler operation including monitoring:

steam reticulation line pressure

boiler steam pressure

steam supply/usage

condensate tank level

bagasse levels

feedwater levels and pressure

fuel levels

boiler load

water quality

furnace pressure

ash pit level and removal system

balance draft system

superheater temperature

drum levels

equipment condition

conduct water quality test

take corrective action in response to out-of-specification results

report and/or record corrective action as required

demonstrate shift handover procedure and confirm that replacement operators are aware of all relevant issues prior to completing handover

demonstrate procedure to take boiler off line

demonstrate procedure to shut-down and clean the boiler

demonstrate removal of valves and fittings to prepare the boiler for inspection

demonstrate procedure to store boiler

demonstrate emergency procedures and related re-start including the use of emergency fuel supply

maintain workplace records

maintain work area to meet housekeeping standards

Required knowledge includes:

Knowledge of:

relevant state OHS legislation, standards and codes of practice relating to work responsibilities

safe work procedures including awareness of health and safety hazards related to boiler operation and associated control measures

purpose and limitations of protective clothing and equipment

hierarchy of hazard control measures

duty of care of the boiler operator

purpose and basic principles of combustion and boiler operation including principles of heat transfer and properties of steam

boiler system layout and steam cycle

the purpose of purging a boiler

the effect of fuel quality on boiler operation

impact of ash removal on efficient boiler operation and impact of sluice water flow

relationship to other processes including an understanding of the impact of sudden load changes on boiler pressure and plant operation

purpose and limitations of protective clothing and equipment

methods used to render equipment safe to inspect, maintain and/or clean including lock-out, tag-out and isolation procedures

water quality test procedures

typical causes of water/condensate contamination and corrective action required

equipment purpose and basic operating principles including high pressure feed pumps, fuel supply system and dual fuel systems as required by boiler type

operating requirements and parameters

procedures for responding to emergency situations including safe shutdown procedure

handover and long term shut down and storage procedures

cleaning procedures and grate dumping

environmental issues and controls including an understanding of sluice water usage

requirements to liaise/advise related work areas

housekeeping standards for the work area

reporting and recording systems including both statutory and workplace requirements

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Policies and procedures

Work is carried out in accordance with company policies and procedures, licensing requirements, manufacturer's recommendations, legislative requirements, codes of practice and industrial awards and agreements.

Codes of Practice

Codes of practice include the Sugar Milling Operations Industry Code of Practice.

Workplace information

Workplace information can include

Standard Operating Procedures (SOPs)

manufacturer's specifications.

Boilers [basic]

Boiler (basic) and related equipment may be

fully or partly attended, and include

single fixed combustion air supply

non-modulating single heat source

fixed firing rate.

Operation and monitoring of equipment and processes typically requires the use of control panels and systems.

Hazards

Hazards typically include:

working around hot surfaces

manual handling

steam, hot gasses and fuel leaks.

Services

Services can include fuel supply of bagasse, coal, gas, oil or other fuel types, steam, mill and instrumentation air, cooling water, general mill water supply and cooling water.

Equipment status

Confirming equipment status involves:

conducting relevant pre-start checks

confirming that cleaning standards are met

all safety guards and manholes are in place

equipment is operational.

Internal cleaning

Internal cleaning is carried out in accordance with statutory requirements regarding confined space entry and does not typically include chemical cleaning.

Teamwork

Work may require the ability to work within a team environment.

Information systems

Information systems may be print or screen based.