The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for profiling
|
|
Applicable occupational health and safety (OHS), environmental, legislative and organisational requirements relevant to cutting material to profile are identified and followed Completed |
Evidence:
|
Work order is reviewed and clarified with appropriate personnel Completed |
Evidence:
|
Type and quantity of material to be profiled is selected from the storage location Completed |
Evidence:
|
Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer recommendations Completed |
Evidence:
|
Profile to be cut is identified and cutting blades are selected Completed |
Evidence:
|
Communication with others is established and maintained in line with OHS requirements Completed |
Evidence:
|
Set up profiling equipment
|
|
Pre-startup checks are carried out on equipment in line with site requirements Completed |
Evidence:
|
Machine guides are selected and attached to the machinery Completed |
Evidence:
|
Cutting blades are installed in the selected machinery Completed |
Evidence:
|
Depth of cut and profile are set in line with the required profile and minimisation of waste Completed |
Evidence:
|
Material stack is positioned in close proximity to maximise ease of machine feeding Completed |
Evidence:
|
Equipment setup is checked and adjusted by running a piece of timber through the machine to set depth and profile Completed |
Evidence:
|
Cut material to profile
|
|
Material is fed into the machine at the feed rate prescribed by organisational requirements Completed |
Evidence:
|
Cutting sequence is followed, maintained and adjusted to produce the required quantity and maximise the feed rate Completed |
Evidence:
|
Profiling process is regularly checked and adjusted to maintain the desired depth and profile Completed |
Evidence:
|
Material with features is rejected and disposed of in line with site procedures and environmental requirements Completed |
Evidence:
|
Processing and equipment faults are reported to the appropriate personnel Completed |
Evidence:
|
Material is safely stacked in a designated location in line with work order Completed |
Evidence:
|
Records and reports are accurately completed, processed and maintained in line with workplace procedures Completed |
Evidence:
|
Conduct operator maintenance
|
|
Equipment lock-out procedures are followed in line with OHS legislation and site procedures Completed |
Evidence:
|
Cutting blades are checked for blunt or damaged condition in line with site procedures Completed |
Evidence:
|
Cutting blades are removed, dealt with and replaced in line with manufacturer recommendations Completed |
Evidence:
|
Machine area is kept clear of dust and debris in line with OHS and environmental requirements Completed |
Evidence:
|