The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for conversion
|
|
Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to producing sawn green boards are identified and followed Completed |
Evidence:
|
Work order is reviewed and checked with appropriate personnel Completed |
Evidence:
|
Type and quantity of material to be cut for green boards are acquired from the storage location Completed |
Evidence:
|
Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer's recommendations Completed |
Evidence:
|
Timber conversion and saw set-up are planned in line with site procedures Completed |
Evidence:
|
Communication with others is established and maintained in line with OHS requirements Completed |
Evidence:
|
Produce green boards
|
|
Pre start-up checks are carried out on equipment in line with site requirements Completed |
Evidence:
|
Saw, carriage and feed are set, regularly checked and adjusted to suit conversion plan, ordered sizes and tolerances Completed |
Evidence:
|
Timber supply is monitored to ensure constant supply to the saw Completed |
Evidence:
|
Saw bench is operated to optimise the production of green boards without damage to boards or saw blade and feed rate maintained Completed |
Evidence:
|
Material with defects, incorrect cuts and off-cuts are disposed of in line with site procedures and environmental requirements Completed |
Evidence:
|
Processing and equipment faults are recorded and reported to the appropriate personnel Completed |
Evidence:
|
Material is safely stacked in a designated location in line with work order requirements Completed |
Evidence:
|
Conduct operator maintenance
|
|
Equipment lock-out procedures are followed in line with OHS legislation and site procedures Completed |
Evidence:
|
Saw and saw blades are checked for blunt or damaged condition in line with site procedures Completed |
Evidence:
|
Blunt or damaged saws are dealt with in line with site procedures, manufacturer's recommendations and environmental requirements Completed |
Evidence:
|
Saw area is kept clear of dust, off-cuts and debris in line with OHS requirements Completed |
Evidence:
|