NTISthis.com

Evidence Guide: FPISAW3216B - Transfer wood chips

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

FPISAW3216B - Transfer wood chips

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to transfer wood chips

  1. Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to transferring wood chips are identified and followed
  2. Work order is reviewed and checked with appropriate personnel
  3. Type and quantity of wood chips to be transferred are acquired from the production process
  4. Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer's recommendations
  5. Transferral process is planned in line with site procedures and environmental requirements and deposit point inspected for access and cleanliness
  6. Communication with others is established and maintained in line with OHS requirements
Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to transferring wood chips are identified and followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work order is reviewed and checked with appropriate personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Type and quantity of wood chips to be transferred are acquired from the production process

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer's recommendations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Transferral process is planned in line with site procedures and environmental requirements and deposit point inspected for access and cleanliness

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Communication with others is established and maintained in line with OHS requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Transfer wood chips

  1. Pre start-up checks are carried out on equipment in line with site requirements
  2. Machines and feed systems are started and adjusted to transfer wood chip to the stockpile or transport in line with organisational requirements
  3. Conveyor operations are monitored and jams cleared to ensure free flow of output material to transfer systems
  4. Wood chips are transferred using a chip slinger or air blower in line with site requirements and transfer specifications
  5. Slinger or blower is manoeuvred to enable filling or distribution over the required area
  6. Filling or distribution levels are checked and stopped or topped up in line with work order and capacity
  7. Transfer process and equipment faults are recorded and reported to the appropriate personnel
Pre start-up checks are carried out on equipment in line with site requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machines and feed systems are started and adjusted to transfer wood chip to the stockpile or transport in line with organisational requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conveyor operations are monitored and jams cleared to ensure free flow of output material to transfer systems

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Wood chips are transferred using a chip slinger or air blower in line with site requirements and transfer specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Slinger or blower is manoeuvred to enable filling or distribution over the required area

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Filling or distribution levels are checked and stopped or topped up in line with work order and capacity

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Transfer process and equipment faults are recorded and reported to the appropriate personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently transfer wood chips within organisational requirements

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to, and satisfy, all of the requirements of the elements of this unit and include demonstration of:

following applicable Commonwealth, State or Territory legislative and regulatory requirements and codes of practice relevant to transferring wood chips

following organisational policies and procedures relevant to transferring wood chips

transferring wood chips in line with the work order and within prescribed organisational requirements

directing wood chips to the transport arrangements and stockpiles in line with organisational requirements and OHS regulations

Context of and specific resources for assessment

Competency is to be assessed in the workplace or realistically simulated workplace

Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints

Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context

Assessment is to follow relevant regulatory or Australian Standards requirements

The following resources should be made available:

workplace location or simulated workplace

materials and equipment relevant to undertaking work applicable to this unit

specifications and work instructions

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge

Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills

Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge

Assessment may be applied under project-related conditions (real or simulated) and require evidence of process

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

Assessment may be in conjunction with assessment of other units of competency

The assessment environment should not disadvantage the candidate

Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English

Where the participant has a disability, reasonable adjustment may be applied during assessment

Language and literacy demands of the assessment task should not be higher than those of the work role

Required Skills and Knowledge

This describes the essential skills and knowledge and their level required for this unit

Required skills

Technical skills sufficient to use and maintain relevant tools, machinery and equipment; efficiently and safely transfer wood chips

Communication skills and interpersonal techniques sufficient to interact appropriately with colleagues and others in the workplace

Literacy skills sufficient to accurately record and report workplace information, and maintain documentation

Numeracy skills sufficient to estimate, measure and calculate time required to complete a task

Problem solving skills sufficient to identify problems and equipment faults and demonstrate appropriate response procedures

Required knowledge

Applicable Commonwealth, State or Territory legislation, regulations, standards, codes of practice and established safe practices relevant to the full range of processes for transferring wood chips

Environmental protection requirements, including the safe disposal of waste material, minimising carbon emissions and the cleaning of plant, tools and equipment

Organisational and site standards, requirements, policies and procedures for transferring wood chips

Environmental risks and hazards

Wood chip transfer techniques

Characteristics of wood chips and stock levels

Chip supply processes

Storage systems and labelling

Established communication channels and protocols

Problem identification and resolution strategies and common fault finding techniques

Types of tools and equipment and procedures for their safe use, operation and maintenance

Appropriate mathematical procedures for estimating and measuring, including calculating time to complete tasks

Procedures for recording and reporting workplace information

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

OHS requirements:

are to be in line with applicable Commonwealth, State or Territory legislation and regulations, and organisational safety policies and procedures, and may include:

personal protective equipment and clothing

safety equipment

first aid equipment

fire fighting equipment

hazard and risk control

fatigue management

elimination of hazardous materials and substances

safe forest practices including required actions relating to forest fire

manual handling including shifting, lifting and carrying

machine isolation and guarding

Environmental requirements may include:

legislation

organisational policies and procedures

workplace practices

Legislative requirements:

are to be in line with applicable Commonwealth, State or Territory legislation, regulations, certification requirements and codes of practice and may include:

award and enterprise agreements

industrial relations

Australian Standards

confidentiality and privacy

OHS

the environment

equal opportunity

anti-discrimination

relevant industry codes of practice

duty of care

Organisational requirements may include:

legal

organisational and site guidelines

policies and procedures relating to own role and responsibility

quality assurance

procedural manuals

quality and continuous improvement processes and standards

OHS, emergency and evacuation procedures

ethical standards

recording and reporting requirements

equipment use and maintenance and storage requirements

environmental management requirements (waste minimisation and disposal, recycling and re-use guidelines)

Work order is to include:

instructions for the transfer of chips

and may include:

location

transport mode

feed rate

quantity

instructions for the environmental monitoring of work and procedures

environmental care requirements relevant to the work

Appropriate personnel may include:

supervisors

suppliers

clients

colleagues

managers

Wood chips

are the output product of converting wood into chip material which is then used to produce other products

Transferral is to include:

the movement of wood chips to stockpiles or transport arrangements using:

chip slingers

air blowers

Equipment may include:

chip slingers

air blowers

mechanised feed systems

and is to include:

procedures for equipment lock-out, ie protecting operators and co-workers from accidental injury by isolating the machine from the power source

Communication may include:

verbal and non-verbal language

constructive feedback

active listening

questioning to clarify and confirm understanding

use of positive, confident and cooperative language

use of language and concepts appropriate to individual social and cultural differences

control of tone of voice

body language

Pre start-up checks

are conducted to ensure:

equipment has been set-up correctly

systems are performing accurately

equipment is operating to optimum performance

Feed systems may include:

conveyors moving processed wood chips from the screening system to the transfer process

chutes or track systems moving processed wood chips from the screening system to the transfer process

Stockpile

is the large pile of processed wood chips ready for distribution or further down-stream processing

Transport may include:

ships

trains

trucks

Conveyor operation

is the process of moving wood chips to the transfer process and from the screening system

Chip slinger

is equipment which manoeuvres chips to the stockpile or transport

Air blower

is equipment which pumps wood chips to the stockpile or transport

Records and reports may include:

stockpile allocation

transport allocation

product type

size

inspection

grading and labelling outcomes

storage locations

quality outcomes

hazards

incidents

equipment malfunctions

and may be:

manual

using a computer-based system or other appropriate organisational communication system