NTISthis.com

Evidence Guide: FPITMM5202B - Develop, trial and evaluate prototypes

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

FPITMM5202B - Develop, trial and evaluate prototypes

What evidence can you provide to prove your understanding of each of the following citeria?

Develop prototype specifications

  1. Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to developing, trialling and evaluating prototypes are identified and followed
  2. Prototype purpose and outline requirements are specified from design concepts or customer requirements
  3. Materials are specified following a detailed analysis of the options
  4. Detailed prototype design specifications are prepared and documented
  5. Construction requirements and methods are specified appropriate for the materials to be used
  6. Communication with others is established and maintained in line with OHS requirements
Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to developing, trialling and evaluating prototypes are identified and followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prototype purpose and outline requirements are specified from design concepts or customer requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Materials are specified following a detailed analysis of the options

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Detailed prototype design specifications are prepared and documented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Construction requirements and methods are specified appropriate for the materials to be used

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Communication with others is established and maintained in line with OHS requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Plan and prepare prototype for construction

  1. Workorder and workplans are produced and checked with appropriatepersonnel
  2. Type and quantity of material and consumables to be constructed are collected
  3. Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer's recommendations
  4. Stages of the construction process are planned, documented and quality checked
  5. Appropriate jigs and other construction aids are obtained and adjusted to suit the work
Workorder and workplans are produced and checked with appropriatepersonnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Type and quantity of material and consumables to be constructed are collected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer's recommendations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Stages of the construction process are planned, documented and quality checked

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Appropriate jigs and other construction aids are obtained and adjusted to suit the work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Produce the prototype

  1. Work plan is followed to construct the item
  2. Checks are conducted at designated points in construction
  3. Modifications to designs and plans are detected and recommended within workplace procedures
  4. Modifications to the plan are documented and followed
  5. Prototype is checked for effectiveness and timeliness of construction to suit the purpose
  6. Prototype development processes and problems are recordedandreported
Work plan is followed to construct the item

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Checks are conducted at designated points in construction

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Modifications to designs and plans are detected and recommended within workplace procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Modifications to the plan are documented and followed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prototype is checked for effectiveness and timeliness of construction to suit the purpose

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prototype development processes and problems are recordedandreported

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trial and evaluate the prototype

  1. Trial objectives and processes are developed, specified and documented
  2. Personnel involved in the trial and evaluation are informed of their responsibilities and functions
  3. Trial equipment, tools and materials are prepared and certified prior to use
  4. Prototype trials are conducted and results captured and recorded in line with the trial specification
  5. Results of trials are evaluated and evaluation records and recommendations are processed in line with enterprise procedures
  6. Sample prototypes are disposed of in line with site procedures and environmental requirements
  7. Prototypes no longer required are stored or disposed of in line with site procedures and environmental requirements
Trial objectives and processes are developed, specified and documented

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Personnel involved in the trial and evaluation are informed of their responsibilities and functions

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Trial equipment, tools and materials are prepared and certified prior to use

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prototype trials are conducted and results captured and recorded in line with the trial specification

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Results of trials are evaluated and evaluation records and recommendations are processed in line with enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Sample prototypes are disposed of in line with site procedures and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prototypes no longer required are stored or disposed of in line with site procedures and environmental requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to provide evidence that they can safely develop, trial and evaluate prototypes within organisational requirements

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements of this unit and include demonstration of:

following applicable Commonwealth, State or Territory legislative and regulatory requirements and codes of practice relevant to developing, trialling and evaluating prototypes

following organisational policies and procedures relevant to developing, trialling and evaluating prototypes

effective communication and safe working practices

developing, trialling and evaluating prototypes in line with construction plans, drawings and specifications to follow construction standards

trialling and evaluating prototype outcomes within acceptable development times, enterprise production procedures and product purpose

Context of and specific resources for assessment

Competency is to be assessed in the workplace or realistically simulated workplace

Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints

Assessment of essential underpinning knowledge, other than confirmatory questions, will usually be conducted in an off-site context

Assessment is to follow relevant regulatory or Australian Standards requirements

The following resources should be made available:

workplace location or simulated workplace

materials and equipment relevant to undertaking work applicable to this unit

specifications and work instructions

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge

Assessment must be by direct observation of tasks, with questioning on underpinning knowledge and it must also reinforce the integration of employability skills

Assessment methods must confirm the ability to access and correctly interpret and apply the essential underpinning knowledge

Assessment may be applied under project-related conditions (real or simulated) and require evidence of process

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

Assessment may be in conjunction with assessment of other units of competency

The assessment environment should not disadvantage the candidate

Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English

Where the participant has a disability, reasonable adjustment may be applied during assessment

Language and literacy demands of the assessment task should not be higher than those of the work role

Required Skills and Knowledge

This describes the essential skills and knowledge and their level required for this unit

Required skills

Technical skills sufficient to use and maintain relevant tools, machinery and equipment, safely develop, trial and evaluate prototypes

Communication skills and interpersonal techniques sufficient to interact appropriately with colleagues and others in the workplace

Literacy skills sufficient to accurately record and report workplace information, and maintain documentation

Numeracy skills sufficient to estimate, measure and calculate time required to complete a task

Problem solving skills sufficient to identify problems and equipment faults and demonstrate appropriate response procedures

Required knowledge

Applicable Commonwealth, State or Territory legislation, regulations, standards, codes of practice and established safe practices relevant to the full range of processes for developing, trialling and evaluating prototypes

Environmental protection requirements, including the safe disposal of waste material and minimising carbon emissions

Organisational and site standards, requirements, policies and procedures relevant to developing, trialling and evaluating prototypes

Environmental risks and hazards

Using energy effectively and efficiently

Using material effectively and efficiently

Prototype development and purposes, prototype trialling and evaluation processes

Characteristics of timber and timber defects

Construction sequences and jigs

Industry standard cross-sections and lengths

Construction componentry and standards

Established communication channels and protocols

Problem identification and resolution strategies and common fault finding techniques

Types of tools and equipment and procedures for their safe use, operation and maintenance

Appropriate mathematical procedures for estimating and measuring, including calculating time to complete tasks

Procedures for recording and reporting workplace information

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

OHSrequirements:

are to be in line with applicable Commonwealth, State or Territory legislation and regulations, and organisational safety policies and procedures, and may include:

personal protective equipment and clothing

safety equipment

first aid equipment

fire fighting equipment

hazard and risk control

fatigue management

elimination of hazardous materials and substances

safe forest practices including required actions relating to forest fire

manual handling including shifting, lifting and carrying

Environmental requirements may include:

legislation

organisational policies and procedures

workplace practices

Legislative requirements:

are to be in line with applicable Commonwealth, State or Territory legislation, regulations, certification requirements and codes of practice and may include:

award and enterprise agreements

industrial relations

Australian Standards

confidentiality and privacy

OHS

the environment

equal opportunity

anti-discrimination

relevant industry codes of practice

duty of care

Organisationalrequirements may include:

legal

organisational and site guidelines

policies and procedures relating to own role and responsibility

quality assurance

procedural manuals

quality and continuous improvement processes and standards

OHS, emergency and evacuation procedures

ethical standards

recording and reporting requirements

equipment use and maintenance and storage requirements

environmental management requirements (waste minimisation and disposal, recycling and re-use guidelines)

Prototypes may include:

new designs for:

pallets

crates

trellises

trusses

stairs

doors

windows

frames, beams

new product development

Material may include:

native timber species

imported timber species

dressed timber

in-the-rough timber

stress and non-stress graded timber

preservative treated timber

medium density fibreboard

laminated veneer

chipboard

fibreboard and other manufactured board products

coated and/or treated timber products

beams or laminated beams

Design is to include:

the process of applying:

problem solving skills

thought processes

cultural and demographic awareness

materials technology

conceptual development techniques

working with production limitations to determine and produce products or 3-D functional solutions

awareness of potential environmental issues and processes to accommodate these issues

using energy and materials efficiently

Communication may include:

verbal and non-verbal language

constructive feedback

active listening

questioning to clarify and confirm understanding

use of positive, confident and cooperative language

use of language and concepts appropriate to individual social and cultural differences

control of tone of voice and body language

Work order is to include:

instructions for the construction and testing of new timber products from the work site

and may include:

construction plans or drawings

type of product

size

quantity

grade

instructions for the environmental monitoring of work and procedures

environmental care requirements relevant to the work

Work plan is to include:

the development sequence

use of material

labour requirements

Appropriate personnel may include:

supervisors

suppliers

clients

colleagues

managers

Consumables are to include:

nailing plates

and may include:

gang nails

nail gun nails

staples

finishing products

adhesives

Equipment may include:

measuring equipment

assembly jigs

nail plate presses

staple guns

nail guns

compressor or compressed air supply

marking equipment

strapping equipment

Stages are to include:

development phases of the new prototype

review for each process and modification

Jigs may include:

enterprise manufactured templates which assist in the positioning of components during the assembly process

newly developed jigs as part of the prototype development process

Modifications may include:

changing aspects of the prototype plans, drawings and specifications to:

facilitate acceptable construction methods

facilitate standard component sizes

rectify and overcome a construction fault

respond to environmental issues

Records and reports may include:

product type

size

inspection

grading and labelling outcomes

storage locations

quality outcomes

hazards

incidents or equipment malfunctions

and may be:

manual

using a computer-based system or other appropriate organisational communication system

Trial is to include:

the process of testing the prototype for:

strength

durability

operational effectiveness

impact of the production process on the environment

Disposing of may include:

recycling sample prototypes or prototypes no longer required

re-using sample prototypes or prototypes no longer required