The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for repair
|
|
Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to repairing veneer and ply are identified and followed Completed |
Evidence:
|
Work order is reviewed and checked with appropriate personnel Completed |
Evidence:
|
Type and quantity of material to be repaired is acquired from the veneer or plywood production process Completed |
Evidence:
|
Filler is selected appropriate to work requirements and checked for effectiveness in line with manufacturer's recommendations Completed |
Evidence:
|
Repair process is selected in line with site procedures Completed |
Evidence:
|
Communication with others is established and maintained in line with OHS requirements Completed |
Evidence:
|
Fill material
|
|
Filler is mixed following manufacturer's instructions or pre-mixed filler is obtained in required quantity Completed |
Evidence:
|
Veneer, panel or plywood condition is inspected and marked in readiness for filling Completed |
Evidence:
|
Filler is applied to voids and allowed to dry in readiness for sanding Completed |
Evidence:
|
Mending tape is applied to splits to retain the integrity of the veneer Completed |
Evidence:
|
Repairs are recorded and reported to appropriate personnel Completed |
Evidence:
|
Redistribute material
|
|
Veneer, panel and plywood are regraded in line with site requirements and industry standards Completed |
Evidence:
|
Material is directed and moved to storage or processing operations in line with site requirements Completed |
Evidence:
|
Sub-standard material is rejected and disposed of in line with site procedures and environmental requirements Completed |
Evidence:
|
Work area is cleaned in line with site requirements Completed |
Evidence:
|