The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for cutting
|
|
Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to cuttingveneer are identified and followed Completed |
Evidence:
|
Work order is reviewed and checked with appropriate personnel Completed |
Evidence:
|
Type and quantity of veneer to be cut is acquired from the veneer production process Completed |
Evidence:
|
Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer's recommendations Completed |
Evidence:
|
Cutting process is selected and planned in line with site procedures Completed |
Evidence:
|
Communication with others is established and maintained in line with OHS requirements Completed |
Evidence:
|
Cut veneer
|
|
Pre start-up checks are carried out on equipment in line with site requirements Completed |
Evidence:
|
Conveyor and guillotine operation is coordinated with veneer production Completed |
Evidence:
|
Optimal cutting positions are selected to minimise defects and maximise full width sheets Completed |
Evidence:
|
Cutting is conducted and feed rate monitored in line with operational procedures Completed |
Evidence:
|
Conveyors are regularly monitored for material flow problems Completed |
Evidence:
|
Veneer is visually assessed through the cutting process Completed |
Evidence:
|
Cutting process and equipment faults are recorded and reported to the appropriate personnel Completed |
Evidence:
|
Redistribute material
|
|
Material is directed and moved to storage or processing operations in line with site requirements Completed |
Evidence:
|
Sub-standard material and off-cuts are rejected and disposed of in line with site procedures and environmental requirements Completed |
Evidence:
|
Work area is cleaned in line with site requirements Completed |
Evidence:
|