The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for treating
|
|
Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to treat paper are identified and followed Completed |
Evidence:
|
Work order is reviewed and checked with appropriate personnel Completed |
Evidence:
|
Type and quantity of paper to be treated is assessed and acquired from the storage location Completed |
Evidence:
|
Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer's recommendations Completed |
Evidence:
|
Treating processes are planned in line with site procedures Completed |
Evidence:
|
Communication with others is established and maintained in line with OHS requirements Completed |
Evidence:
|
Load and treat paper
|
|
Paper rolls are located and moved to loader Completed |
Evidence:
|
Pre start-up checks are carried out on equipment in line with site requirements Completed |
Evidence:
|
Paper is threaded and feed commenced and monitored in line with operating procedures and minimal damage to paper Completed |
Evidence:
|
Rolls are changed at depletion and in conjunction with treatment requirements Completed |
Evidence:
|
Treater is brought to full operating condition and operating parameters regularly checked in line with site requirements Completed |
Evidence:
|
Treating line is run and paper treated with foreign material monitored and kept clear of treating process Completed |
Evidence:
|
Resin parameters are regularly checked and adjusted in line with operating procedures Completed |
Evidence:
|
Paper is regularly assessed to ensure specified outcomes have been achieved Completed |
Evidence:
|
Paper treating process and equipment faults are recorded and reported to the appropriate personnel Completed |
Evidence:
|
Fill resin tank
|
|
Resin feed from tanks is shut off in line with operating procedures Completed |
Evidence:
|
Resin tanks are thoroughly washed and drained following operating procedures Completed |
Evidence:
|
Resin being pumped from the delivery truck to the tank is monitored to ensure successful transfer and documentation is completed Completed |
Evidence:
|
Area surrounding tank is washed clear of any spillage in line with statutory requirements and environmental regulations Completed |
Evidence:
|
Operate effluent system
|
|
Effluent tanks are monitored and regularly cleaned in line with site requirements Completed |
Evidence:
|
Settling agents are added to effluent tanks to enterprise specified quantities and allowed to settle Completed |
Evidence:
|
Solids are removed and disposed of in line with statutory requirements and environmental regulations Completed |
Evidence:
|
Conduct operator maintenance
|
|
Treater shut-down procedures are followed in line with OHS legislation and site procedures Completed |
Evidence:
|
Treating mechanisms are checked for effective condition in line with site procedures Completed |
Evidence:
|
Vat and oven temperatures are checked, adjusted or maintained Completed |
Evidence:
|
Excess resin is disposed of in line with statutory requirements and environmental regulations Completed |
Evidence:
|
Treating area is kept clear of dust, shavings and debris in line with OHS requirements Completed |
Evidence:
|