The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for pressing
|
|
Applicable Occupational Health and Safety (OHS), environmental, legislative and organisational requirements relevant to operating a continuous press are identified and followed Completed |
Evidence:
|
Work order is reviewed and checked with appropriate personnel Completed |
Evidence:
|
Type and quantity of chips, flakes or fibre to be pressed is acquired from the storage location Completed |
Evidence:
|
Equipment is selected appropriate to work requirements and checked for operational effectiveness in line with manufacturer's recommendations Completed |
Evidence:
|
Pressing process is selected in line with site procedures Completed |
Evidence:
|
Communication with others is established and maintained in line with OHS requirements Completed |
Evidence:
|
Form and press board
|
|
Pre start-up checks are carried out on equipment in line with site requirements Completed |
Evidence:
|
Press pressures, temperatures and product parameters are set and adjusted for production requirements Completed |
Evidence:
|
Operational condition and set-up of former is checked to confirm mat condition Completed |
Evidence:
|
Forming equipment is checked for defects and positioned to load press in line with operating procedures Completed |
Evidence:
|
Boards are pressed while monitoring and adjusting board position, feed rate, mat condition and press condition Completed |
Evidence:
|
Size changes and line speeds are planned to meet production schedules Completed |
Evidence:
|
Pressed board and thickness changes are regularly assessed and necessary changes made to former, press set-up and blending requirements Completed |
Evidence:
|
Board samples are tested to confirm following of industry standard and to check for defects Completed |
Evidence:
|
Finished boards are transferred for further processing in line with site requirements Completed |
Evidence:
|
Finished boards with defects are rejected and disposed of in line with site procedures and environmental requirements Completed |
Evidence:
|
Pressing process and equipment faults are recorded and reported to the appropriate personnel Completed |
Evidence:
|
Shut down and clean equipment
|
|
Shutdown procedures are coordinated with designated stop time and other line operators, and followed in line with OHS legislation and site procedures Completed |
Evidence:
|
Board and forming equipment are separated and removed from press using unloading equipment Completed |
Evidence:
|
Blending equipment, press and handling equipment are stripped and cleaned in line with site operating procedures Completed |
Evidence:
|
Machine area is kept clear of foreign material, dust and debris in line with OHS requirements Completed |
Evidence:
|