The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Identify and diagnose causes of process variation, plant or equipment faults
|
|
Causes of process variation, plant or equipment faults are identified and diagnosed within Occupational Health and Safety (OHS) regulations, environmental and safe working requirements/practices, Standard Operating Procedures (SOP), and housekeeping requirements Completed |
Evidence:
|
Visual assessments and machine alarm systems are interpreted to determine fault type and location Completed |
Evidence:
|
Routine physical inspections of plant and processes are made to identify faults Completed |
Evidence:
|
Cause and source of process variation, plant or equipment faults is identified and located using appropriate techniques Completed |
Evidence:
|
Relevant historical data is accessed and analysed to confirm diagnosis as required Completed |
Evidence:
|
Problems are communicated to relevant personnel Completed |
Evidence:
|
Rectify process variation, plant and equipment faults
|
|
Process variation, plant and equipment faults are rectified within OHS regulations, environmental and safe working requirements/practices, SOP, and housekeeping requirements Completed |
Evidence:
|
Emergency stop or shutdown, isolation and lockout procedures are initiated prior to fault rectification Completed |
Evidence:
|
Faulty equipment or instrumentation is isolated and repaired or replaced Completed |
Evidence:
|
Corrective operational adjustments and maintenance requirements are implemented Completed |
Evidence:
|
Restoration to normal operation is achieved and communicated to relevant personnel Completed |
Evidence:
|
Identify and rectify product quality faults
|
|
Product quality faults are identified and rectified within OHS regulations, environmental and safe working requirements/practices, SOP, and housekeeping requirements Completed |
Evidence:
|
Product faults or variations are identified by observation, systematic sampling and testing Completed |
Evidence:
|
Out-of-specification product is managed Completed |
Evidence:
|
Sampling for a range of tests is undertaken Completed |
Evidence:
|
Required tests are conducted Completed |
Evidence:
|
Test results are interpreted and operations are adjusted to correct variations Completed |
Evidence:
|
Record and report troubleshooting activities
|
|
Troubleshooting activities are recorded and reported within OHS regulations, environmental and safe working requirements/practices, SOP, and housekeeping requirements Completed |
Evidence:
|
Variations from specification and machine operation faults are documented Completed |
Evidence:
|
Assessment and evaluation of causes of deviation, and corrective action undertaken is recorded as required Completed |
Evidence:
|
Relevant information is communicated to appropriate personnel Completed |
Evidence:
|