NTISthis.com

Evidence Guide: FPPEPG320A - Manage a power generation system startup

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

FPPEPG320A - Manage a power generation system startup

What evidence can you provide to prove your understanding of each of the following citeria?

Conduct local inspections and pre-operational safety checks

  1. Local inspections and pre-operational safety checks are conducted within Occupational Health and Safety (OHS) regulations, environmental and safe working requirements/practices, Standard Operating Procedures (SOP), and housekeeping requirements
  2. Plant status is confirmed by inspection, observations and other information
  3. Potential work area hazards are identified, reported, controlled and measures are employed to contain hazards
  4. Work requirements are determined in conjunction with power authorities
  5. Operational requirements are established
  6. Sequencing for plant startup to suit current circumstances is determined
  7. Operational maintenance requirements are undertaken as required
Local inspections and pre-operational safety checks are conducted within Occupational Health and Safety (OHS) regulations, environmental and safe working requirements/practices, Standard Operating Procedures (SOP), and housekeeping requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Plant status is confirmed by inspection, observations and other information

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Potential work area hazards are identified, reported, controlled and measures are employed to contain hazards

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Work requirements are determined in conjunction with power authorities

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Operational requirements are established

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Sequencing for plant startup to suit current circumstances is determined

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Operational maintenance requirements are undertaken as required

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Initiate startup procedures

  1. Startup procedures are initiated within OHS regulations, environmental and safe working requirements/practices, SOP, and housekeeping requirements
  2. Sequence for plant startup is commenced
  3. Generation system start is co-ordinated with distribution and ancillary systems and brought on-line
  4. System or plant is observed for correct operational response
  5. Deviations from required operating conditions are detected and corrective action undertaken to rectify
  6. Routine documentation is maintained and logs completed
  7. Startup information is recorded and reported as required
Startup procedures are initiated within OHS regulations, environmental and safe working requirements/practices, SOP, and housekeeping requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Sequence for plant startup is commenced

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Generation system start is co-ordinated with distribution and ancillary systems and brought on-line

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

System or plant is observed for correct operational response

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Deviations from required operating conditions are detected and corrective action undertaken to rectify

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Routine documentation is maintained and logs completed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Startup information is recorded and reported as required

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence should be relevant to the work. It should satisfy the requirements of the elements and performance criteria and include consideration of:

the required knowledge and skills tailored to the needs of the specific workplace

applicable OHS regulations, environmental and safe working requirements/practices, SOP and housekeeping requirements

applicable aspects of the range statement

practical workplace demonstration of skills in managing a power generation system startup

Context of and specific resources for assessment

A workplace assessment must be used to assess:

the application of required knowledge on the job

the application of skills on the job, over time and under a range of typical conditions that may be experienced in power generation system operations

Access to the full range of equipment involved in integrated continuous manufacturing of power generation systems in a pulp or paper mill is required

Method of assessment

A combination of assessment methods should be used. The following examples are appropriate for this unit:

observation of applied skills and knowledge on the job

workplace demonstrations via a mock-up or simulation that replicate part/s of the job

answers to written or verbal questions about specific skills and knowledge

third-party reports from relevant and skilled personnel

written evidence e.g. log sheet entries, checklist entries, test results

Assessment processes and techniques must be culturally appropriate and in keeping with the language and literacy capacity of the learner and the work being performed. This includes conducting an assessment in a manner that allows thoughts to be conveyed verbally so that the learner can both understand and be understood by the assessor (e.g. use plain English and terminology used on the job)

A holistic assessment with other units relevant to the pulp and paper industry, mill and job role is recommended

Additional information on approaches to assessment for the pulp and paper industry is provided in the Assessment Guidelines for this Training Package

Required Skills and Knowledge

This describes the skills and knowledge required for this unit.

Required skills

Uses required forms of communication in managing a power generation system startup

Reads and interprets required documentation, procedures and reports

Interprets instruments, gauges and data recording equipment

Accesses, navigates and enters computer-based information

Prepares written information and enters data to support groups and teams

Communicates with customers and other relevant personnel

Interprets instruments, gauges and data recording equipment

Identifies and actions problems within level of responsibility

Determines systems faults, causes and effects

Identifies and monitors process control points

Maintains situational awareness in the work area

Conducts appropriate adjustments to maintain operation at required levels

Maintains a clean and hazard free workplace

Uses measuring equipment as required

Uses tools and equipment

Conducts routine checks

Operates high risk equipment as required

Carries out operator level maintenance as required

Analyses and uses sensory information to adjust process to maintain and co-ordinate safety, quality and productivity

Uses electronic and other control systems to control equipment and processes as required

Required knowledge

Procedures, regulations and legislative requirements relevant to power generation systems including OHS, environmental including relevant sustainability requirements/practices, SOP, isolation procedures, safe working requirements, risks and hazard identification and housekeeping

Relevant forms of communication

Basic problem-solving techniques consistent with level of responsibility

Working knowledge of power generation plant, processes, layout and associated services sufficient to carry out startup activities within level of responsibility

Effect of steam quality on turbine operation

Pre-start limitations and run-up limitations

AC/DC generation principles

Output control and regulation principles

Power factor characteristics and effects

Electrical isolation procedures

Principles of operation of transformers and circuit protection systems within level of responsibility

Operational tolerances of the turbine system and the effect of operating outside these tolerances

Power distribution systems

Application of high risk equipment as required

Sensory information that indicates a deviation from standard operating parameters

Sufficient knowledge of electronic and other control systems, operation and application to make appropriate adjustments that control power generation systems, within level of responsibility

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Productivity requirements may include:

energy efficiency

waste minimisation

evaporation minimisation, including landfill and waste water reduction

environmentally safe waste disposal

consideration of resource utilisation, including fibre efficiency

minimising delays

chemical recovery maximisation

meeting key performance indicators

line speed

handovers

quality checks

meeting output targets i.e. net tonnes per employee per annum

machine/process time availability i.e. time the machine or process is making product

machine/process production rate

Management and operation of power generation may include:

availability of required supplies

electricity generation

regulation and distribution systems

Materials and supplies may include:

water

air

steam

electricity

gas

Equipment may include:

boilers

high and low voltage transformers

steam or gas turbine driven alternators

switchboards

water systems and auxiliary plant

circuit breakers

AC/DC generation and distribution systems

protective equipment

measuring and recording equipment

computer systems

electronic screens and alarms

process control systems

analogue and digital instrumentation

fully automated, semi-automated, manually operated plant and equipment appropriate to the power generation process

Electronic control systems may include:

Digital Control System (DCS)

touch screens

robotics

Legislation, regulatory, licensing and certification requirements may include:

OHS and environmental requirements (local, state and commonwealth)

activity or task specific high risk licensing requirements

operator endorsement requirements

local power authority rules and regulations

Documentation, procedures and reports may include:

SOP

quality procedures

environmental sustainability requirements/practices

plant manufacturing operating manuals

enterprise policies and procedures

oil or chemical spills and disposal guidelines

plant isolation documentation

safe work documentation e.g. plant clearance, job safety analysis, permit systems

operational logs and reports

maintenance logs

Materials Safety Data Sheets (MSDS)

process and instrument diagrams

Maintenance may include:

operator level maintenance as per site agreements

operator maintenance schedules

maintenance systems

maintenance suppliers

proactive maintenance strategies e.g. Total Productive Maintenance (TPM), Reliability Centred Maintenance (RCM)

Actions may include:

process adjustments

reporting to authorised person

rectifying problem within level of responsibility

Communications may include

interaction with:

internal/external customers and suppliers

team members

production/service coordinators

maintenance services

operational management

statutory authorities

Situational awareness may include

awareness of:

traffic

pedestrians

location of equipment

product

hazards

obstruction

unexpected movement

Forms of communication may include:

written e.g. log books, emails, incident and other reports, run sheets, data entry

reading and interpreting documentation e.g. SOP, manuals, checklists, drawings

verbal e.g. radio skills, telephone, face to face, handover

non-verbal e.g. hand signals, alarms, observations

signage e.g. safety, access

Sensory information may include:

visual

sound

feel

touch

smell

vibration

temperature