NTISthis.com

Evidence Guide: FPPSUS210A - Apply sustainable work practices/policies

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

FPPSUS210A - Apply sustainable work practices/policies

What evidence can you provide to prove your understanding of each of the following citeria?

Identify current resource use

  1. Workplace environmental and resource efficiency issues are identified and clarified with appropriate personnel
  2. Resources used in own work role are identified
  3. Current usage of resources is measured and documented using appropriate techniques
Workplace environmental and resource efficiency issues are identified and clarified with appropriate personnel

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Resources used in own work role are identified

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Current usage of resources is measured and documented using appropriate techniques

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Comply with relevant regulations

  1. Identified legislative and workplace requirements are applied
  2. Breaches or potential breaches of identified legislative and workplace requirements are reported to appropriate personnel according to workplace procedures
Identified legislative and workplace requirements are applied

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Breaches or potential breaches of identified legislative and workplace requirements are reported to appropriate personnel according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Seek opportunities to improve efficiency

  1. Workplace plans to improve environmental practices and resource efficiency are followed
  2. Suggestions are made for improvements to workplace practices in own work area
Workplace plans to improve environmental practices and resource efficiency are followed

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Suggestions are made for improvements to workplace practices in own work area

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence should be relevant to the work. It should satisfy the requirements of the elements and performance criteria and include consideration of:

the required knowledge and skills tailored to the needs of the specific workplace

applicable OHS regulations, environmental and safe working requirements/practices, SOP and housekeeping requirements

applicable aspects of the range statement

practical workplace demonstration of skills

Context of and specific resources for assessment

A workplace assessment must be used to assess:

the application of required knowledge on the job

the application of skills on the job, over time and under a range of typical conditions that may be experienced pulp mill operations

Access to the full range of equipment involved in integrated continuous manufacturing operations in a pulp or paper mill is required

Method of assessment

A combination of assessment methods should be used. The following examples are appropriate for this unit:

observation of applied skills and knowledge on the job

workplace demonstrations via a mock-up or simulation that replicate part/s of the job

answers to written or verbal questions about specific skills and knowledge

third-party reports from relevant and skilled personnel

written evidence e.g. log sheet entries, checklist entries, test results

Assessment processes and techniques must be culturally appropriate and in keeping with the language and literacy capacity of the learner and the work being performed. This includes conducting an assessment in a manner that allows thoughts to be conveyed verbally so that the learner can both understand and be understood by the assessor (e.g. use plain English and terminology used on the job)

A holistic assessment with other units relevant to the pulp and paper industry, mill and job role is recommended

Additional information on approaches to assessment for the pulp and paper industry is provided in the Assessment Guidelines for this Training Package

Required Skills and Knowledge

This describes the skills and knowledge required for this unit.

Required skills

Uses required forms of communication in applying sustainable work policies

Reads and interprets required documentation, procedures and reports

Identifies and actions problems within level of responsibility

Maintains situational awareness in the work area

Recognises procedures, follows instructions and responds to change

Communicates with questions to clarify work requirements

Required knowledge

Procedures, regulations and legislative requirements including OHS, environmental including relevant sustainability requirements/practices, Standard Operating Procedures (SOP), isolation procedures, safe working requirements, risks and hazard identification and housekeeping

Relevant forms of communication

Basic problem-solving techniques consistent with level of responsibility

Basic understanding of sustainability

Environmental and resource hazards/risks and inefficiencies associated within own work area

Relevant environmental and resource efficiency systems and procedures for own work area

Laws and regulations relevant to the work context

Reporting procedures

Upstream/downstream impacts of the application of sustainable work practices

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Productivity requirements may include:

energy efficiency e.g. gas

waste minimisation

evaporation minimisation, including landfill and waste water reduction

environmentally safe waste disposal

consideration of resource utilisation, including fibre efficiency

minimising delays

chemical recovery maximisation

meeting key performance indicators

line speed

handovers

quality checks

meeting output targets i.e. net tonnes per employee per annum

machine/process time availability i.e. time the machine or process is making product

machine/process production rate

minimising water usage

minimising chemical usage

chain of custody requirements

Environmental and resource efficiency may include:

minimisation of environmental risks and maximisation of opportunities to improve business environmental performance and outputs and to promote more efficient production and consumption of natural resources, for example by:

minimising waste, less landfill, less water contaminants, efficient energy use, efficient water use

Legislation, regulatory, licensing and certification requirements may include:

OHS and environmental requirements (local, state and commonwealth)

Workplace plans may include:

documented policies and procedures

work plans to minimise waste, increase efficiency of water use etc.

SOP

Suggestions may include ideas that help to:

prevent and minimise risks and maximise opportunities such as usage of alternative forms of energy where appropriate

reduce emissions of greenhouse gases

reduce use of non-renewable resources

improve energy efficiency

increase use of renewable, recyclable, reusable and recoverable resources