The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for operation
|
|
Review work order and clarify with appropriate personnel. Completed |
Evidence:
|
Select equipment appropriate to work requirements and check for operational effectiveness. Completed |
Evidence:
|
Prepare, check and clear work area, ready for operations. Completed |
Evidence:
|
Carry out pre-start checks on fixed saw in line with site requirements. Completed |
Evidence:
|
Establish and maintain communication with others in work area to ensure safety. Completed |
Evidence:
|
Cross cut material
|
|
Visually assess material to be cut for defects that may present unsafe work conditions and review cut. Completed |
Evidence:
|
Cut material within site standard tolerances for length and angle relative to centre line. Completed |
Evidence:
|
Use cutting techniques to industry standard lengths, maximising volume and quality of recovery material. Completed |
Evidence:
|
Operate fixed saw effectively, in line with manufacturer's recommendations. Completed |
Evidence:
|
Regularly check and clear work are in line with WHS requirements and site procedures. Completed |
Evidence:
|
Dispose of sub-standard material in line with site procedures and environmental requirements Completed |
Evidence:
|
Identify and report problems in line with site procedures Completed |
Evidence:
|
Maintain saw
|
|
Lock-out, clean and maintain fixed saw in line with manufacturer's recommendations and site procedures. Completed |
Evidence:
|
Identify blunt or damaged saws and replace or sharpen, in line with site procedures and manufacturer's recommendations. Completed |
Evidence:
|
Record and report fixed operations and maintenance to appropriate personnel. Completed |
Evidence:
|