The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for edge banding
|
|
Review work order and where required check with appropriate personnel. Completed |
Evidence:
|
Identify type and quantity of panels to be edge banded and obtain panels. Completed |
Evidence:
|
Select appropriate equipment and check for operational effectiveness in line with manufacturer's recommendations. Completed |
Evidence:
|
Select edge banding process in line with work order. Completed |
Evidence:
|
Set up edge banding equipment
|
|
Follow lock out procedures, set machine to suit material to be edged and adjust as required. Completed |
Evidence:
|
Use equipment in line with organisational safety procedures, manufacturer’s instructions environmental protection practices. Completed |
Evidence:
|
Conduct test runs to check machine operation, accuracy and quality of finished work and make adjustments to machine settings. Completed |
Evidence:
|
Use suitable tested materials for processing or reject and dispose of in line with environmental protection practices. Completed |
Evidence:
|
Apply edging
|
|
Feed panels into machine in line with manufacturer's instructions and safety procedures. Completed |
Evidence:
|
Monitor machine operations to ensure product quality and output. Completed |
Evidence:
|
Minimise waste by checking trim distances for cut off on each panel. Completed |
Evidence:
|
Repair sub-standard panels, dispose of or recycle in line with environmental protection practices. Completed |
Evidence:
|
Identify routine processing and equipment faults and resolve or report to appropriate personnel. Completed |
Evidence:
|
Complete production and quality records and report in line with organisational procedures. Completed |
Evidence:
|
Complete operator maintenance
|
|
Follow organisational safety procedures to lock out equipment. Completed |
Evidence:
|
Check edging mechanisms for bluntness and build-up of glue and rectify. Completed |
Evidence:
|
Check and reload edge treatments in line with manufacturer recommendations. Completed |
Evidence:
|
Clear dust and debris from machine area. Completed |
Evidence:
|
Record and report equipment faults and maintenance requirements to appropriate personnel. Completed |
Evidence:
|