NTISthis.com

Evidence Guide: FWPWPP3207 - Clip veneer

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

FWPWPP3207 - Clip veneer

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for veneer clipping

  1. Review work order and where required check with appropriate personnel.
  2. Select appropriate personal protective equipment and check for operational effectiveness.
  3. Obtain type and quantity of veneer to be clipped from veneer production process.
  4. Select clipping process in line with work order.
Review work order and where required check with appropriate personnel.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select appropriate personal protective equipment and check for operational effectiveness.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Obtain type and quantity of veneer to be clipped from veneer production process.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select clipping process in line with work order.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clip veneer

  1. Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices.
  2. Complete pre-start up equipment checks to ensure operational effectiveness.
  3. Set clipping machine functions for optimal product recovery.
  4. Select clipping pattern to match veneer type.
  5. Clip veneer to specification and assess sheets visually throughout clipping process for dimension, edge and other defects.
  6. Clip sheets to size, removing unwanted sections and providing clean edges.
Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete pre-start up equipment checks to ensure operational effectiveness.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set clipping machine functions for optimal product recovery.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select clipping pattern to match veneer type.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clip veneer to specification and assess sheets visually throughout clipping process for dimension, edge and other defects.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clip sheets to size, removing unwanted sections and providing clean edges.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Sort and redistribute veneer

  1. Grade clipped veneer and classify into colour and match groupings in line with industry standards.
  2. Direct material to storage or processing operations in line with organisational procedures.
  3. Dispose of incorrect cuts, off cuts and defective material in line with environmental protection practices.
  4. Clean work area in line with organisational safety procedures.
  5. Record and report production outcomes and equipment faults to appropriate personnel.
Grade clipped veneer and classify into colour and match groupings in line with industry standards.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Direct material to storage or processing operations in line with organisational procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Dispose of incorrect cuts, off cuts and defective material in line with environmental protection practices.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean work area in line with organisational safety procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Record and report production outcomes and equipment faults to appropriate personnel.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1. Prepare for veneer clipping

1.1 Review work order and where required check with appropriate personnel.

1.2 Select appropriate personal protective equipment and check for operational effectiveness.

1.3 Obtain type and quantity of veneer to be clipped from veneer production process.

1.4 Select clipping process in line with work order.

2. Clip veneer

2.1 Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices.

2.2 Complete pre-start up equipment checks to ensure operational effectiveness.

2.3 Set clipping machine functions for optimal product recovery.

2.4 Select clipping pattern to match veneer type.

2.5 Clip veneer to specification and assess sheets visually throughout clipping process for dimension, edge and other defects.

2.6 Clip sheets to size, removing unwanted sections and providing clean edges.

3. Sort and redistribute veneer

3.1 Grade clipped veneer and classify into colour and match groupings in line with industry standards.

3.2 Direct material to storage or processing operations in line with organisational procedures.

3.3 Dispose of incorrect cuts, off cuts and defective material in line with environmental protection practices.

3.4 Clean work area in line with organisational safety procedures.

3.5 Record and report production outcomes and equipment faults to appropriate personnel.

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1. Prepare for veneer clipping

1.1 Review work order and where required check with appropriate personnel.

1.2 Select appropriate personal protective equipment and check for operational effectiveness.

1.3 Obtain type and quantity of veneer to be clipped from veneer production process.

1.4 Select clipping process in line with work order.

2. Clip veneer

2.1 Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices.

2.2 Complete pre-start up equipment checks to ensure operational effectiveness.

2.3 Set clipping machine functions for optimal product recovery.

2.4 Select clipping pattern to match veneer type.

2.5 Clip veneer to specification and assess sheets visually throughout clipping process for dimension, edge and other defects.

2.6 Clip sheets to size, removing unwanted sections and providing clean edges.

3. Sort and redistribute veneer

3.1 Grade clipped veneer and classify into colour and match groupings in line with industry standards.

3.2 Direct material to storage or processing operations in line with organisational procedures.

3.3 Dispose of incorrect cuts, off cuts and defective material in line with environmental protection practices.

3.4 Clean work area in line with organisational safety procedures.

3.5 Record and report production outcomes and equipment faults to appropriate personnel.

A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. If a specific volume or frequency is not stated below, then evidence must be provided that the following requirements have been performed on at least one occasion:

clip veneer to form a straight edge and remove these types of defects in line with individual work orders that prescribe different dimensions and quantities:

uneven edges

split edges

excessive knots

for each of the above jobs, visually inspect veneer to re-classify its quality and use after clipping.

A person competent in this unit must be able to demonstrate knowledge of:

environmental protection practices for forest products factory settings:

reducing water and energy use

cleaning plant, tools and equipment

disposing of, recycling and reusing veneer

typical flow of material supply in and out of the veneer clipping area

typical work flow processes and veneer clipping techniques for optimising use of veneer panels

methods used to visually assess condition of veneer for dimension, typical production and other defects:

warp

wane

knots

splits

uneven edges

key features of industry standard grades for re-classifying quality of clipped veneer and applicable terminology

purpose, features and operation of equipment used to clip veneer:

measuring tapes

dial gauges

clipping machines

guillotines

conveyor belt systems

different types of lifting equipment:

fork lifts

slings

trolley jacks

gantry cranes

loaders

organisational procedures specific to clipping veneer:

workplace health and safety with particular emphasis on equipment lock out and use of personal protective equipment

communication reporting lines

recording and reporting production outcomes and equipment faults.

Range Statement

Not Applicable