NTISthis.com

Evidence Guide: FWPWPP3211 - Maintain caul plates and screens

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

FWPWPP3211 - Maintain caul plates and screens

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for maintenance

  1. Review work order and where required check with appropriate personnel.
  2. Select appropriate repair, maintenance and personal protective equipment and check for operational effectiveness.
  3. Remove caul plates and screens for maintenance from designated machinery.
  4. Plan maintenance process in line with work order.
Review work order and where required check with appropriate personnel.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Select appropriate repair, maintenance and personal protective equipment and check for operational effectiveness.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Remove caul plates and screens for maintenance from designated machinery.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Plan maintenance process in line with work order.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Change, clean and polish caul plates

  1. Follow organisational safety procedures and manufacturer’s recommendations throughout all maintenance and repair processes.
  2. Identify plates requiring cleaning and move from circuit to plate rack.
  3. Process plates through full cleaning cycle; inspect for defects and separate for repair where required.
  4. Dry plates, prepare for use and return to circuit.
  5. Polish plates using polishing table and head.
  6. Store polished plates for use in line with work order.
  7. Store or dispose of unused chemicals in line with environmental protection practices.
Follow organisational safety procedures and manufacturer’s recommendations throughout all maintenance and repair processes.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify plates requiring cleaning and move from circuit to plate rack.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Process plates through full cleaning cycle; inspect for defects and separate for repair where required.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Dry plates, prepare for use and return to circuit.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Polish plates using polishing table and head.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Store polished plates for use in line with work order.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Store or dispose of unused chemicals in line with environmental protection practices.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Prepare backing screens

  1. Roll screens from plate and secure.
  2. Process screens through full cleaning cycle; stack and inspect for faults.
  3. Identify defective screens, remove and dispose of these in line with environmental protection practices.
Roll screens from plate and secure.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Process screens through full cleaning cycle; stack and inspect for faults.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify defective screens, remove and dispose of these in line with environmental protection practices.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Remove and replace transport plates

  1. Coordinate load shifting and transport requirements to remove and replace transport plates with minimal downtime.
  2. Identify defective plates, remove from circuit and dispose of these in line with environmental protection practices.
  3. Prepare and fit replacement plates.
  4. Record and report process outcomes and equipment faults to appropriate personnel.
Coordinate load shifting and transport requirements to remove and replace transport plates with minimal downtime.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Identify defective plates, remove from circuit and dispose of these in line with environmental protection practices.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Prepare and fit replacement plates.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Record and report process outcomes and equipment faults to appropriate personnel.

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1. Prepare for maintenance

1.1 Review work order and where required check with appropriate personnel.

1.2 Select appropriate repair, maintenance and personal protective equipment and check for operational effectiveness.

1.3 Remove caul plates and screens for maintenance from designated machinery.

1.4 Plan maintenance process in line with work order.

2. Change, clean and polish caul plates

2.1 Follow organisational safety procedures and manufacturer’s recommendations throughout all maintenance and repair processes.

2.2 Identify plates requiring cleaning and move from circuit to plate rack.

2.3 Process plates through full cleaning cycle; inspect for defects and separate for repair where required.

2.4 Dry plates, prepare for use and return to circuit.

2.5 Polish plates using polishing table and head.

2.6 Store polished plates for use in line with work order.

2.7 Store or dispose of unused chemicals in line with environmental protection practices.

3. Prepare backing screens

3.1 Roll screens from plate and secure.

3.2 Process screens through full cleaning cycle; stack and inspect for faults.

3.3 Identify defective screens, remove and dispose of these in line with environmental protection practices.

4. Remove and replace transport plates

4.1 Coordinate load shifting and transport requirements to remove and replace transport plates with minimal downtime.

4.2 Identify defective plates, remove from circuit and dispose of these in line with environmental protection practices.

4.3 Prepare and fit replacement plates.

4.4 Record and report process outcomes and equipment faults to appropriate personnel.

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1. Prepare for maintenance

1.1 Review work order and where required check with appropriate personnel.

1.2 Select appropriate repair, maintenance and personal protective equipment and check for operational effectiveness.

1.3 Remove caul plates and screens for maintenance from designated machinery.

1.4 Plan maintenance process in line with work order.

2. Change, clean and polish caul plates

2.1 Follow organisational safety procedures and manufacturer’s recommendations throughout all maintenance and repair processes.

2.2 Identify plates requiring cleaning and move from circuit to plate rack.

2.3 Process plates through full cleaning cycle; inspect for defects and separate for repair where required.

2.4 Dry plates, prepare for use and return to circuit.

2.5 Polish plates using polishing table and head.

2.6 Store polished plates for use in line with work order.

2.7 Store or dispose of unused chemicals in line with environmental protection practices.

3. Prepare backing screens

3.1 Roll screens from plate and secure.

3.2 Process screens through full cleaning cycle; stack and inspect for faults.

3.3 Identify defective screens, remove and dispose of these in line with environmental protection practices.

4. Remove and replace transport plates

4.1 Coordinate load shifting and transport requirements to remove and replace transport plates with minimal downtime.

4.2 Identify defective plates, remove from circuit and dispose of these in line with environmental protection practices.

4.3 Prepare and fit replacement plates.

4.4 Record and report process outcomes and equipment faults to appropriate personnel.

A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. If a specific volume or frequency is not stated below, then evidence must be provided that the following requirements have been performed on at least one occasion:

complete maintenance jobs in line with individual work orders

for each of the above jobs complete the following maintenance and repair activities:

process caul plates and screens through the full cleaning cycle which may be via chemical or heat treatment baths

polish caul plates to ensure optimum operation

inspect caul plates, screen and transport plates for defects and process for repair or dispose of.

A person competent in this unit must be able to demonstrate knowledge of:

environmental protection practices for maintaining and repairing cauls and screens:

reducing water and energy use

cleaning plant, tools and equipment

disposing of, recycling and reusing defective materials

disposing of hazardous substances

operational purpose and features of caul plates, screens and transport plates

purpose, features and operation of tools and equipment used to maintain and repair caul plates and screens:

chemical baths

heat treatment baths

polishing table and machinery

methods used to remove and replace caul and transport plates

typical defects and methods used to assess condition of caul plates, screens and transport plates:

buckling

buildup of board product

marking of plates

dents

characteristics of metal used in caul plates and screens and how they respond to chemical and heat cleaning processes and polishing in the case of caul plates

polishing techniques to ensure caul plate surfaces are smooth for optimum board separation

methods used to safely handle and store chemicals used in the cleaning process

organisational procedures specific to maintaining and repairing caul plates and screens:

workplace health and safety with particular emphasis on equipment lock out, use of personal protective equipment and handling hazardous substances

communication reporting lines

recording and reporting process outcomes and equipment faults.

Range Statement

Not Applicable