NTISthis.com

Evidence Guide: FWPWPP3222 - Press laminated ply

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

FWPWPP3222 - Press laminated ply

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for pressing.

  1. Review and check work order with appropriate personnel.
  2. Identify hazards and control risk in the work area.
  3. Acquire type and quantity of ply to be pressed from the assembly process.
  4. Conduct pre-start checks on equipment in line with manufacturer's recommendations and site requirements.
  5. Select pressing process in line with site procedures.
  6. Communicate with relevant personnel as required, to ensure safety and production requirements are met.
Review and check work order with appropriate personnel.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify hazards and control risk in the work area.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Acquire type and quantity of ply to be pressed from the assembly process.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct pre-start checks on equipment in line with manufacturer's recommendations and site requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select pressing process in line with site procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Communicate with relevant personnel as required, to ensure safety and production requirements are met.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operate, monitor and report pressing process.

  1. Set and adjust press cycle times, pressures, temperatures and product parameters to meet production requirements.
  2. Assess assembled ply and check tack level before loading with defective assemblies returned for reworking.
  3. Operate and monitor hot or cold press to press boards in line with site requirements.
  4. Perform unload and reload cycles.
  5. Regularly assess pressed and finished ply and action necessary changes to assembly and pressing processes.
  6. Dispose of sub-standard pressed ply in line with site procedures and environmental requirements.
  7. Record and report pressing process and equipment faults to appropriate personnel.
Set and adjust press cycle times, pressures, temperatures and product parameters to meet production requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assess assembled ply and check tack level before loading with defective assemblies returned for reworking.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Operate and monitor hot or cold press to press boards in line with site requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Perform unload and reload cycles.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Regularly assess pressed and finished ply and action necessary changes to assembly and pressing processes.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Dispose of sub-standard pressed ply in line with site procedures and environmental requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Record and report pressing process and equipment faults to appropriate personnel.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Unload, maintain and load press.

  1. Open press in line with operating procedures.
  2. Separate and remove ply and plates.
  3. Load ply into transport or storage racks for cooling.
  4. Monitor plate condition during unloading, clean and spray with release agent and remove defective plates for repair.
  5. Stack assembled ply, plates and overlay panels in press to specified height or number and squareness.
  6. Transfer finished ply for further processing in line with site requirements.
Open press in line with operating procedures.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Separate and remove ply and plates.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Load ply into transport or storage racks for cooling.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor plate condition during unloading, clean and spray with release agent and remove defective plates for repair.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Stack assembled ply, plates and overlay panels in press to specified height or number and squareness.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Transfer finished ply for further processing in line with site requirements.

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1. Prepare for pressing.

1.1 Review and check work order with appropriate personnel.

1.2 Identify hazards and control risk in the work area.

1.3 Acquire type and quantity of ply to be pressed from the assembly process.

1.4 Conduct pre-start checks on equipment in line with manufacturer's recommendations and site requirements.

1.5 Select pressing process in line with site procedures.

1.6 Communicate with relevant personnel as required, to ensure safety and production requirements are met.

2. Operate, monitor and report pressing process.

2.1 Set and adjust press cycle times, pressures, temperatures and product parameters to meet production requirements.

2.2 Assess assembled ply and check tack level before loading with defective assemblies returned for reworking.

2.3 Operate and monitor hot or cold press to press boards in line with site requirements.

2.4 Perform unload and reload cycles.

2.5 Regularly assess pressed and finished ply and action necessary changes to assembly and pressing processes.

2.6 Dispose of sub-standard pressed ply in line with site procedures and environmental requirements.

2.7 Record and report pressing process and equipment faults to appropriate personnel.

3. Unload, maintain and load press.

3.1 Open press in line with operating procedures.

3.2 Separate and remove ply and plates.

3.3 Load ply into transport or storage racks for cooling.

3.4 Monitor plate condition during unloading, clean and spray with release agent and remove defective plates for repair.

3.5 Stack assembled ply, plates and overlay panels in press to specified height or number and squareness.

3.6 Transfer finished ply for further processing in line with site requirements.

Required Skills and Knowledge

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.

1. Prepare for pressing.

1.1 Review and check work order with appropriate personnel.

1.2 Identify hazards and control risk in the work area.

1.3 Acquire type and quantity of ply to be pressed from the assembly process.

1.4 Conduct pre-start checks on equipment in line with manufacturer's recommendations and site requirements.

1.5 Select pressing process in line with site procedures.

1.6 Communicate with relevant personnel as required, to ensure safety and production requirements are met.

2. Operate, monitor and report pressing process.

2.1 Set and adjust press cycle times, pressures, temperatures and product parameters to meet production requirements.

2.2 Assess assembled ply and check tack level before loading with defective assemblies returned for reworking.

2.3 Operate and monitor hot or cold press to press boards in line with site requirements.

2.4 Perform unload and reload cycles.

2.5 Regularly assess pressed and finished ply and action necessary changes to assembly and pressing processes.

2.6 Dispose of sub-standard pressed ply in line with site procedures and environmental requirements.

2.7 Record and report pressing process and equipment faults to appropriate personnel.

3. Unload, maintain and load press.

3.1 Open press in line with operating procedures.

3.2 Separate and remove ply and plates.

3.3 Load ply into transport or storage racks for cooling.

3.4 Monitor plate condition during unloading, clean and spray with release agent and remove defective plates for repair.

3.5 Stack assembled ply, plates and overlay panels in press to specified height or number and squareness.

3.6 Transfer finished ply for further processing in line with site requirements.

A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit. If a specific volume or frequency is not stated below, then evidence must be provided that the following requirements have been performed on at least one occasion:

identify hazards and control risks in the work area

operate hot and cold pressing equipment to produce laminated ply according to safe work procedure:

set parameters

load press

unload press

restart press cycle

monitor quality of pressed and finished ply and adjust pressing process

dispose of sub-standard ply according to site and environmental protection requirements

inspect plates for faults and remove defective plates for repair

record and report pressing process according to workplace procedure

redistribute material on site using designated equipment according to workplace procedures.

A person competent in this unit must be able to demonstrate knowledge of:

safe work procedure for pressing ply

environmental protection requirements relevant to safe disposal or re-use of waste material

procedures for identifying and controlling hazards and risks associated with pressing ply

laminated ply characteristics

hot, cold and combination pressing methods

storage areas for cooling ply

procedures for identifying and rectifying faults during the pressing process

procedures for identifying signs of defective pressing plates

procedures for equipment lock-out

procedures for recording and reporting pressing process and faults

procedures for transferring finished ply

procedures for removing and cleaning press plates.

Range Statement

Not Applicable