The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare to slice veneers.
|
|
Review work order and check with appropriate personnel. Completed |
Evidence:
|
Identify and follow safe work procedure for producing veneers from prepared flitches. Completed |
Evidence:
|
Identify hazards and control risk in the work area. Completed |
Evidence:
|
Acquire type and quantity of timber species to be sliced from storage location. Completed |
Evidence:
|
Select equipment and conduct pre-start check in line with manufacturer's recommendations and site requirements. Completed |
Evidence:
|
Plan veneer slicing process and thickness in line with site procedures. Completed |
Evidence:
|
Establish and maintain communication with relevant personnel as required, to ensure safety and production requirements are met. Completed |
Evidence:
|
Load flitches, slice veneers and dispose of waste.
|
|
Check size and condition of prepared flitches and load acceptable flitches into slicer. Completed |
Evidence:
|
Position flitches to maximise available veneer and remove waste product. Completed |
Evidence:
|
Set and operate veneer slicing process to optimise veneer recovery in line with site procedures. Completed |
Evidence:
|
Constantly adjust machine speed and control of veneer cut to suit flitch characteristics in line with site procedures. Completed |
Evidence:
|
Dispose of defective material and rejected flitch and backing-board in line with site procedures and environmental requirements. Completed |
Evidence:
|
Maintain equipment, clean up and follow record keeping procedure.
|
|
Lock out equipment according to standard operating procedure. Completed |
Evidence:
|
Check cutting blades for blunt or damaged condition in line with manufacturer’s recommendations and site procedures, and remove and replace as required. Completed |
Evidence:
|
Clear dust, off-cuts and debris from machine area and dispose of in line with in line with safe work procedure and environmental requirements. Completed |
Evidence:
|
Record and report processing and equipment faults to appropriate personnel. Completed |
Evidence:
|