NTISthis.com

Evidence Guide: FWPWPP3232 - Operate a heat roll bonding machine to laminate or veneer engineered wood panel surfaces

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

FWPWPP3232 - Operate a heat roll bonding machine to laminate or veneer engineered wood panel surfaces

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for lamination work

  1. Review work order, workplace health and safety requirements, environmental protection practices and emergency procedures for lamination operation and, where required, check with appropriate personnel
  2. Identify and report hazards and use personal protective equipment according to workplace requirements and health and safety legislation to maintain safe work practices
  3. Obtain the type and quantity of engineered wood panel and laminate or veneer to be laminated from the production process
  4. Select production process according to work order
Review work order, workplace health and safety requirements, environmental protection practices and emergency procedures for lamination operation and, where required, check with appropriate personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify and report hazards and use personal protective equipment according to workplace requirements and health and safety legislation to maintain safe work practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Obtain the type and quantity of engineered wood panel and laminate or veneer to be laminated from the production process

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select production process according to work order

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Apply laminate or veneer

  1. Use equipment according to workplace health and safety procedures, manufacturer instructions and environmental protection practices
  2. Complete pre start-up equipment checks to ensure operational effectiveness
  3. Load veneer or laminate and engineered wood panel and feed in the correct sequence to suit planned assembly
  4. Adjust spreader stations to deliver material according to required engineered wood panel cross-section distribution
  5. Adjust glue feed, spread and tack level regularly, apply glue to engineered wood panel evenly and ensure panel remains free of foreign material
  6. Check heat rolling process regularly to prevent creases, bubbles and other surface defects
  7. Monitor laminate or veneer routinely for the position, adhesion, contamination, finish and trim tolerances
  8. Transfer finished engineered wood panels for further processing according to workplace health and safety procedures
  9. Dispose of sub-standard material according to environmental protection practices
Use equipment according to workplace health and safety procedures, manufacturer instructions and environmental protection practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete pre start-up equipment checks to ensure operational effectiveness

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Load veneer or laminate and engineered wood panel and feed in the correct sequence to suit planned assembly

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adjust spreader stations to deliver material according to required engineered wood panel cross-section distribution

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adjust glue feed, spread and tack level regularly, apply glue to engineered wood panel evenly and ensure panel remains free of foreign material

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check heat rolling process regularly to prevent creases, bubbles and other surface defects

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Monitor laminate or veneer routinely for the position, adhesion, contamination, finish and trim tolerances

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Transfer finished engineered wood panels for further processing according to workplace health and safety procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Dispose of sub-standard material according to environmental protection practices

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Shut down and clean equipment

  1. Coordinate shutdown with other line operators according to workplace health and safety procedures
  2. Strip, clean and replace gluing equipment, rollers, cauls, screens and handling equipment
  3. Check cutters or blades for bluntness or damage and remove and replace according to manufacturer recommendations
  4. Keep machine clear of dust and debris according to workplace health and safety procedures
  5. Record and report production outcomes, equipment faults and maintenance requirements to appropriate personnel
Coordinate shutdown with other line operators according to workplace health and safety procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Strip, clean and replace gluing equipment, rollers, cauls, screens and handling equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check cutters or blades for bluntness or damage and remove and replace according to manufacturer recommendations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Keep machine clear of dust and debris according to workplace health and safety procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Record and report production outcomes, equipment faults and maintenance requirements to appropriate personnel

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Required Skills and Knowledge