NTISthis.com

Evidence Guide: ICPCBF312 - Set cutting forme and strippers

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

ICPCBF312 - Set cutting forme and strippers

What evidence can you provide to prove your understanding of each of the following citeria?

Cut cutting forme wood

  1. Bridge holes are accurately drilled
  2. Saw cuts accurately match line drawing on cutting forme blank
  3. Holes are reinforced and in register with fixing screws
  4. Knives and creasers are cut and shaped accurately to suit cutting forme
Bridge holes are accurately drilled

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Saw cuts accurately match line drawing on cutting forme blank

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Holes are reinforced and in register with fixing screws

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Knives and creasers are cut and shaped accurately to suit cutting forme

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare knives, creasers and cutting forme rubbers

  1. Knives and creasers are set accurately into place on cutting forme blank
  2. Rubber is located on cutting forme to eject product and waste as required
Knives and creasers are set accurately into place on cutting forme blank

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Rubber is located on cutting forme to eject product and waste as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set stripping material

  1. Stripping materials are attached securely and accurately to stripper backing material
  2. Mounting strips are correctly fixed
Stripping materials are attached securely and accurately to stripper backing material

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mounting strips are correctly fixed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Proof cutting forme

  1. Sample meets production order specifications
  2. Cutting forme is adjusted or re-cut if required
Sample meets production order specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cutting forme is adjusted or re-cut if required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain cutting forme and stripper

  1. Correct number is allocated to cutting formes/strippers and recorded as per enterprise procedures
  2. Cutting forme machine is cleaned according to work health and safety requirements and enterprise procedures
  3. Problems are accurately described to supervisor or maintenance department
  4. Status of cutting formes/strippers is reported correctly and without delay to production
Correct number is allocated to cutting formes/strippers and recorded as per enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cutting forme machine is cleaned according to work health and safety requirements and enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Problems are accurately described to supervisor or maintenance department

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Status of cutting formes/strippers is reported correctly and without delay to production

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Cut cutting forme wood

1.1 Bridge holes are accurately drilled

1.2 Saw cuts accurately match line drawing on cutting forme blank

1.3 Holes are reinforced and in register with fixing screws

1.4 Knives and creasers are cut and shaped accurately to suit cutting forme

2. Prepare knives, creasers and cutting forme rubbers

2.1 Knives and creasers are set accurately into place on cutting forme blank

2.2 Rubber is located on cutting forme to eject product and waste as required

3. Set stripping material

3.1 Stripping materials are attached securely and accurately to stripper backing material

3.2 Mounting strips are correctly fixed

4. Proof cutting forme

4.1 Sample meets production order specifications

4.2 Cutting forme is adjusted or re-cut if required

5. Maintain cutting forme and stripper

5.1 Correct number is allocated to cutting formes/strippers and recorded as per enterprise procedures

5.2 Cutting forme machine is cleaned according to work health and safety requirements and enterprise procedures

5.3 Problems are accurately described to supervisor or maintenance department

5.4 Status of cutting formes/strippers is reported correctly and without delay to production

Required Skills and Knowledge

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Cut cutting forme wood

1.1 Bridge holes are accurately drilled

1.2 Saw cuts accurately match line drawing on cutting forme blank

1.3 Holes are reinforced and in register with fixing screws

1.4 Knives and creasers are cut and shaped accurately to suit cutting forme

2. Prepare knives, creasers and cutting forme rubbers

2.1 Knives and creasers are set accurately into place on cutting forme blank

2.2 Rubber is located on cutting forme to eject product and waste as required

3. Set stripping material

3.1 Stripping materials are attached securely and accurately to stripper backing material

3.2 Mounting strips are correctly fixed

4. Proof cutting forme

4.1 Sample meets production order specifications

4.2 Cutting forme is adjusted or re-cut if required

5. Maintain cutting forme and stripper

5.1 Correct number is allocated to cutting formes/strippers and recorded as per enterprise procedures

5.2 Cutting forme machine is cleaned according to work health and safety requirements and enterprise procedures

5.3 Problems are accurately described to supervisor or maintenance department

5.4 Status of cutting formes/strippers is reported correctly and without delay to production

Evidence of the ability to:

correctly prepare TWO cutting formes (one large, one small) to accommodate TWO different, typically used substrates using all relevant processes according to manufacturer’s and job specifications, enterprise procedures and listed performance criteria.

Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.

To complete the unit requirements safely and effectively, the individual must:

identify work health and safety factors for:

setting knives

cleaning the machine

list checks made to correctly position bridge holes

explain reinforcing bridge holes

identify checks to ensure saw cuts accurately match the line drawings

list checks made when cutting and shaping knives and creasers

list factors that determine the amount of rubber attached to the forme

list factors that determine positioning of the rubber on the forme

list important items to consider when setting knives and creasers into position on the forme blank

list checks required when attaching stripping materials to stripper backing materials and determine how this is done accurately

explain the purpose of mounting strips

identify areas to proof to ensure the cutting forme meets production order specifications

explain the importance of allocating numbers to each forme, and the accepted method of recording forme allocation numbers

identify areas of the machine that need regular cleaning, materials that need to be cleaned from the machine, and how to keep the machine clear of surface rust (condensation)

list recommended cleaning agents applicable to the cutting forme machine

identify how to record and report machine maintenance problems

identify indicators that the machine is in need of oiling/greasing

explain the importance of monitoring condition of the forme and stripper, and information to record when reporting the condition status

identify machine manuals, safety and other documentation relevant to this task, where they are kept, and the information included in them.