The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Maintain delivery systems
|
|
Delivery systems are monitored and adjusted to ensure continuous and efficient operation and avoid damage to finished product Completed |
Evidence:
|
Substrate is added and removed to and from the process according to job specifications Completed |
Evidence:
|
Maintain cutting system
|
|
Knife or die condition is monitored and adjusted to ensure product quality meets the approved sample standard Completed |
Evidence:
|
Cutting pressures are monitored and adjusted to ensure product quality meets the approved sample standard Completed |
Evidence:
|
Registration of cutting devices and knives or dies are monitored and adjusted to ensure product quality meets the approved sample standard Completed |
Evidence:
|
Packing of cutting devices or dies is monitored and adjusted to ensure product quality meets the approved sample standard Completed |
Evidence:
|
Maintain complex process
|
|
Registration and squareness of folds are monitored and adjusted to ensure product quality meets the approved sample standard, if relevant Completed |
Evidence:
|
Collating/inserting process is monitored and adjusted to ensure product quality meets the approved sample standard, if relevant Completed |
Evidence:
|
Maintain production process
|
|
Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule Completed |
Evidence:
|
Production is maintained according to work health and safety (WHS) requirements, manufacturer’s specifications and enterprise procedures Completed |
Evidence:
|
Manual and/or automatic control is used according to job specifications Completed |
Evidence:
|
Performance is monitored and verified using the process control system according to enterprise procedures Completed |
Evidence:
|
Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention Completed |
Evidence:
|
Process adjustments to eliminate problems are reported according to enterprise procedures Completed |
Evidence:
|
Faulty performance of equipment is identified and reported according to enterprise procedures Completed |
Evidence:
|
Waste is sorted according to enterprise procedures Completed |
Evidence:
|
Identify and rectify problems or faults
|
|
Product and substrate are monitored and tested to ensure conformance to client requirements Completed |
Evidence:
|
Problems in converting/finishing machine operation are identified and reported according to enterprise procedures Completed |
Evidence:
|
Adjustments or corrections are carried out according to specified procedures and manufacturer’s specifications Completed |
Evidence:
|
Converting/finishing machine operation is checked to ensure correct operation Completed |
Evidence:
|
Conduct shutdown of production process
|
|
Correct shutdown sequence is followed according to manufacturer’s specifications and enterprise procedures Completed |
Evidence:
|
Shutdown is conducted in association with fellow workers and in compliance with WHS requirements Completed |
Evidence:
|
Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures Completed |
Evidence:
|
Machine faults requiring repair are identified and reported to designated person according to enterprise procedures Completed |
Evidence:
|
Repair/adjustment is verified prior to resumption of operations Completed |
Evidence:
|
Clean converting/finishing machine at end of run
|
|
Cutting devices and knives or dies are cleaned or replaced ready for next run Completed |
Evidence:
|
Cutting devices are sharpened according to WHS procedures Completed |
Evidence:
|
All units are disengaged and cleaned ready for next run Completed |
Evidence:
|
Delivery systems are disengaged and cleaned ready for next run Completed |
Evidence:
|
Production records or other documentation are accurately completed where required by enterprise procedures Completed |
Evidence:
|