NTISthis.com

Evidence Guide: ICPCBF326 - Undertake pre make-ready for die cutting

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

ICPCBF326 - Undertake pre make-ready for die cutting

What evidence can you provide to prove your understanding of each of the following citeria?

Obtain job instuctions and locate forme

  1. Job sheets or instructions are interpreted correctly
  2. Existing formes are located in storage area using filing system and new formes and associated tooling are collected from holding location
Job sheets or instructions are interpreted correctly

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Existing formes are located in storage area using filing system and new formes and associated tooling are collected from holding location

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Check cutting forme

  1. Cutting forme/tooling is checked against master sample for accuracy of cut and fold
  2. Centre line is located and checked to ensure accuracy of positioning/registration on Bobst
Cutting forme/tooling is checked against master sample for accuracy of cut and fold

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Centre line is located and checked to ensure accuracy of positioning/registration on Bobst

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Position and set up counters

  1. Cutting plate is located and prepared for counters
  2. Counters are accurately positioned and set up on cutting plate to ensure registration with cutting forme
Cutting plate is located and prepared for counters

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Counters are accurately positioned and set up on cutting plate to ensure registration with cutting forme

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Conduct sample cut

  1. Material to be used for sample cut is obtained
  2. Cutting forme and cutting plate are accurately positioned on machine
  3. Machine is operated to produce sample according to enterprise procedures
Material to be used for sample cut is obtained

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Cutting forme and cutting plate are accurately positioned on machine

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Machine is operated to produce sample according to enterprise procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Check sample

  1. Sample is accurately cut and registration of tooling is precise
  2. Forme or tooling is adjusted if necessary, according to job specifications
  3. Sample is confirmed as correct by supervisor if required
Sample is accurately cut and registration of tooling is precise

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Forme or tooling is adjusted if necessary, according to job specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Sample is confirmed as correct by supervisor if required

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Set up stripping forme and blank separator

  1. Pins are positioned on stripping forme to ensure accurate removal of waste board
  2. Blank separator is set up according to job specifications
Pins are positioned on stripping forme to ensure accurate removal of waste board

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Blank separator is set up according to job specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Undertake filing procedure

  1. Correct identification number is allocated to cutting formes/tooling and strippers, and recorded
  2. Information is correctly entered into filing system according to enterprise procedures
Correct identification number is allocated to cutting formes/tooling and strippers, and recorded

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Information is correctly entered into filing system according to enterprise procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Obtain job instuctions and locate forme

1.1 Job sheets or instructions are interpreted correctly

1.2 Existing formes are located in storage area using filing system and new formes and associated tooling are collected from holding location

2. Check cutting forme

2.1 Cutting forme/tooling is checked against master sample for accuracy of cut and fold

2.2 Centre line is located and checked to ensure accuracy of positioning/registration on Bobst

3. Position and set up counters

3.1 Cutting plate is located and prepared for counters

3.2 Counters are accurately positioned and set up on cutting plate to ensure registration with cutting forme

4. Conduct sample cut

4.1 Material to be used for sample cut is obtained

4.2 Cutting forme and cutting plate are accurately positioned on machine

4.3 Machine is operated to produce sample according to enterprise procedures

5. Check sample

5.1 Sample is accurately cut and registration of tooling is precise

5.2 Forme or tooling is adjusted if necessary, according to job specifications

5.3 Sample is confirmed as correct by supervisor if required

6. Set up stripping forme and blank separator

6.1 Pins are positioned on stripping forme to ensure accurate removal of waste board

6.2 Blank separator is set up according to job specifications

7. Undertake filing procedure

7.1 Correct identification number is allocated to cutting formes/tooling and strippers, and recorded

7.2 Information is correctly entered into filing system according to enterprise procedures

Required Skills and Knowledge

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Obtain job instuctions and locate forme

1.1 Job sheets or instructions are interpreted correctly

1.2 Existing formes are located in storage area using filing system and new formes and associated tooling are collected from holding location

2. Check cutting forme

2.1 Cutting forme/tooling is checked against master sample for accuracy of cut and fold

2.2 Centre line is located and checked to ensure accuracy of positioning/registration on Bobst

3. Position and set up counters

3.1 Cutting plate is located and prepared for counters

3.2 Counters are accurately positioned and set up on cutting plate to ensure registration with cutting forme

4. Conduct sample cut

4.1 Material to be used for sample cut is obtained

4.2 Cutting forme and cutting plate are accurately positioned on machine

4.3 Machine is operated to produce sample according to enterprise procedures

5. Check sample

5.1 Sample is accurately cut and registration of tooling is precise

5.2 Forme or tooling is adjusted if necessary, according to job specifications

5.3 Sample is confirmed as correct by supervisor if required

6. Set up stripping forme and blank separator

6.1 Pins are positioned on stripping forme to ensure accurate removal of waste board

6.2 Blank separator is set up according to job specifications

7. Undertake filing procedure

7.1 Correct identification number is allocated to cutting formes/tooling and strippers, and recorded

7.2 Information is correctly entered into filing system according to enterprise procedures

Evidence of the ability to:

prepare FOUR cutting formes (two large and two small) to accommodate TWO different complexities of cutting (at least one must contain multiple images with extremely tight registration and highly accurate cutting requirements)

demonstrate accurate attachment of stripper materials

evidence for assessment may be gathered from assessment of the unit of competency alone or through an integrated assessment activity.

Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.

To complete the unit requirements safely and effectively, the individual must:

list checks required to correctly position bridge holes

explain how to reinforce bridge holes

list checks to perform to ensure saw cuts accurately match line drawings

list checks when cutting and shaping the knives and creasers

identify work health and safety factors for setting knives

identify factors that determine the amount and positioning of rubber attached to the forme

determine important items to consider when setting knives and creasers into position on the forme blank

list checks for attaching stripping materials to stripper backing materials

explain the purpose of mounting strips

identify areas to proof to ensure cutting forme meets production order specifications

explain allocation of numbers to each forme

determine the method of recording forme allocation numbers that is the accepted formula.