NTISthis.com

Evidence Guide: ICPCBF406 - Set up and load in-line smart card machine

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

ICPCBF406 - Set up and load in-line smart card machine

What evidence can you provide to prove your understanding of each of the following citeria?

Set and adjust sections of machine

  1. All details required for the job are checked and confirmed according to job specifications
  2. Correct materials are checked and available for the job
  3. All light sensors and proximity sensors are operating
  4. Mills are set to right cavity depth for chips
  5. Tape indexer and die are cleaned and chip registration is correct
  6. Implanting module is set up and registered and adhesives are available and dispenser is clean and ready
  7. Machine and in-line components are initialised
All details required for the job are checked and confirmed according to job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Correct materials are checked and available for the job

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

All light sensors and proximity sensors are operating

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mills are set to right cavity depth for chips

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tape indexer and die are cleaned and chip registration is correct

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Implanting module is set up and registered and adhesives are available and dispenser is clean and ready

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machine and in-line components are initialised

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Confirm computer settings

  1. Encoder settings are correct and conform to job specifications
  2. Tester settings are correct and conform to job specifications
  3. Setting on the computer that controls entire machine is correctly set
Encoder settings are correct and conform to job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tester settings are correct and conform to job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Setting on the computer that controls entire machine is correctly set

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set up printer unit

  1. Print head is set up and adjusted according to job specifications
  2. Ink and solvent levels are checked and refilled if necessary
  3. Settings are selected according to job specifications
  4. Drying is checked as sufficient to key ink to the substrate
  5. Printer is set up according to work health and safety (WHS) guidelines
Print head is set up and adjusted according to job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Ink and solvent levels are checked and refilled if necessary

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Settings are selected according to job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Drying is checked as sufficient to key ink to the substrate

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Printer is set up according to work health and safety (WHS) guidelines

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Load machine

  1. Substrate is prepared according to job specifications
  2. Substrate is positioned correctly to the machine
  3. Faulty material is visually identified and removed according to WHS requirements and enterprise procedures
  4. Cards are loaded according to WHS requirements and manufacturer’s specifications and enterprise procedures
  5. Settings are checked according to job specifications before production starts
  6. Work area is safe and ready for production according to safety requirements
Substrate is prepared according to job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Substrate is positioned correctly to the machine

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faulty material is visually identified and removed according to WHS requirements and enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cards are loaded according to WHS requirements and manufacturer’s specifications and enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Settings are checked according to job specifications before production starts

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Work area is safe and ready for production according to safety requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Set and adjust sections of machine

1.1 All details required for the job are checked and confirmed according to job specifications

1.2 Correct materials are checked and available for the job

1.3 All light sensors and proximity sensors are operating

1.4 Mills are set to right cavity depth for chips

1.5 Tape indexer and die are cleaned and chip registration is correct

1.6 Implanting module is set up and registered and adhesives are available and dispenser is clean and ready

1.7 Machine and in-line components are initialised

2. Confirm computer settings

2.1 Encoder settings are correct and conform to job specifications

2.2 Tester settings are correct and conform to job specifications

2.3 Setting on the computer that controls entire machine is correctly set

3. Set up printer unit

3.1 Print head is set up and adjusted according to job specifications

3.2 Ink and solvent levels are checked and refilled if necessary

3.3 Settings are selected according to job specifications

3.4 Drying is checked as sufficient to key ink to the substrate

3.5 Printer is set up according to work health and safety (WHS) guidelines

4. Load machine

4.1 Substrate is prepared according to job specifications

4.2 Substrate is positioned correctly to the machine

4.3 Faulty material is visually identified and removed according to WHS requirements and enterprise procedures

4.4 Cards are loaded according to WHS requirements and manufacturer’s specifications and enterprise procedures

4.5 Settings are checked according to job specifications before production starts

4.6 Work area is safe and ready for production according to safety requirements

Required Skills and Knowledge

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Set and adjust sections of machine

1.1 All details required for the job are checked and confirmed according to job specifications

1.2 Correct materials are checked and available for the job

1.3 All light sensors and proximity sensors are operating

1.4 Mills are set to right cavity depth for chips

1.5 Tape indexer and die are cleaned and chip registration is correct

1.6 Implanting module is set up and registered and adhesives are available and dispenser is clean and ready

1.7 Machine and in-line components are initialised

2. Confirm computer settings

2.1 Encoder settings are correct and conform to job specifications

2.2 Tester settings are correct and conform to job specifications

2.3 Setting on the computer that controls entire machine is correctly set

3. Set up printer unit

3.1 Print head is set up and adjusted according to job specifications

3.2 Ink and solvent levels are checked and refilled if necessary

3.3 Settings are selected according to job specifications

3.4 Drying is checked as sufficient to key ink to the substrate

3.5 Printer is set up according to work health and safety (WHS) guidelines

4. Load machine

4.1 Substrate is prepared according to job specifications

4.2 Substrate is positioned correctly to the machine

4.3 Faulty material is visually identified and removed according to WHS requirements and enterprise procedures

4.4 Cards are loaded according to WHS requirements and manufacturer’s specifications and enterprise procedures

4.5 Settings are checked according to job specifications before production starts

4.6 Work area is safe and ready for production according to safety requirements

Evidence of the ability to:

correctly set up and adjust an in-line smart card machine and load it in preparation for production in accordance with job specifications and listed performance criteria

demonstrate all safety devices on the machine.

Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.

To complete the unit requirements safely and effectively, the individual must:

describe production quality requirements

explain waste disposal procedures for faulty material and procedures for correct handling of material

explain important features of the smart card printing and encoding machine

explain principles of printing and ink usage.