NTISthis.com

Evidence Guide: ICPCF221C - Set up and produce basic guillotined product

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

ICPCF221C - Set up and produce basic guillotined product

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare job

  1. Job specifications are read and interpreted from job documentation or production control system
  2. Set-up is carried out correctly in minimum time with minimum wastage
  3. Availability of all job related components is checked
  4. Grip and lay edges of sheet are identified
Job specifications are read and interpreted from job documentation or production control system

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set-up is carried out correctly in minimum time with minimum wastage

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Availability of all job related components is checked

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Grip and lay edges of sheet are identified

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Check knife sharpness

  1. Knives are checked for appropriate sharpness
  2. Dull knives are reported and arrangements made for them to be changed
  3. Cutting sticks are replaced when necessary
Knives are checked for appropriate sharpness

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Dull knives are reported and arrangements made for them to be changed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cutting sticks are replaced when necessary

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set up machine for basic guillotining

  1. Guillotine is manually set up and adjusted according to job specifications
  2. Clamping pressures are set up and adjusted according to job specifications
Guillotine is manually set up and adjusted according to job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clamping pressures are set up and adjusted according to job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct simple cut process

  1. Material to be used for sample is organised correctly
  2. Machine is set up and operated to produce a specified sample according to OHS requirements, manufacturer's specifications and enterprise procedures
Material to be used for sample is organised correctly

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machine is set up and operated to produce a specified sample according to OHS requirements, manufacturer's specifications and enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Organise sample inspection and/or testing

  1. Sample is visually inspected and/or tested or laboratory testing is organised according to enterprise procedures
  2. Results are interpreted to determine adjustment requirements
  3. Adjustment changes are carried out according to product and machine specifications
Sample is visually inspected and/or tested or laboratory testing is organised according to enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Results are interpreted to determine adjustment requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adjustment changes are carried out according to product and machine specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain basic guillotining process

  1. Knife and cutting stick condition is monitored and adjusted to ensure the quality of product meets the standard of the approved sample
  2. Cutting pressures are monitored and adjusted to ensure the quality of product meets the standard of the approved sample
  3. Registration of knives is monitored and adjusted to ensure quality of product meets the standard of the approved sample of the approved sample
Knife and cutting stick condition is monitored and adjusted to ensure the quality of product meets the standard of the approved sample

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cutting pressures are monitored and adjusted to ensure the quality of product meets the standard of the approved sample

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Registration of knives is monitored and adjusted to ensure quality of product meets the standard of the approved sample of the approved sample

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain production process

  1. Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule
  2. Production is maintained according to OHS requirements, manufacturer's specifications and enterprise procedures
  3. Manual and/or automatic control is used according to job specifications
  4. Performance is monitored and verified using the process control system according to enterprise procedures
  5. Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention
  6. Process adjustments to eliminate problems are reported according to enterprise procedures
  7. Faulty performance of equipment is identified and reported according to enterprise procedures
  8. Waste is sorted according to enterprise procedures
Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Production is maintained according to OHS requirements, manufacturer's specifications and enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Manual and/or automatic control is used according to job specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Performance is monitored and verified using the process control system according to enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Process adjustments to eliminate problems are reported according to enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Faulty performance of equipment is identified and reported according to enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Waste is sorted according to enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Identify and rectify problems and faults

  1. Problems in guillotining machine operation are identified and reported according to enterprise procedures
  2. Adjustments or corrections are carried out according to specified procedures and are consistent with operator's skill level
  3. Guillotining machine operation is checked to ensure correct operation
Problems in guillotining machine operation are identified and reported according to enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Adjustments or corrections are carried out according to specified procedures and are consistent with operator's skill level

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Guillotining machine operation is checked to ensure correct operation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Conduct shutdown of production process

  1. Correct shutdown sequence is followed according to manufacturer's specifications and enterprise procedures
  2. Shutdown is conducted in association with fellow workers and in compliance with OHS requirements
  3. Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures
  4. Machine faults requiring repair are identified and reported to designated person according to enterprise procedures
  5. Repair/adjustment is verified prior to resumption of operations
Correct shutdown sequence is followed according to manufacturer's specifications and enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Shutdown is conducted in association with fellow workers and in compliance with OHS requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machine faults requiring repair are identified and reported to designated person according to enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Repair/adjustment is verified prior to resumption of operations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean guillotining machine at end of run

  1. Knives are replaced and cleaned ready for next run
  2. Machine bed is cleaned ready for next run
  3. Cutting units are disengaged and cleaned ready for next run
  4. Production records or other documentation are accurately completed where required by enterprise procedures
Knives are replaced and cleaned ready for next run

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Machine bed is cleaned ready for next run

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cutting units are disengaged and cleaned ready for next run

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Production records or other documentation are accurately completed where required by enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the following is essential:

correctly produce basic guillotined product according to job specifications and within the production timeframe

demonstrate an ability to find and use information relevant to the task from a variety of information sources

demonstrate all safety devices on the machine

set up (not including knife change) and produce TWO basic guillotined products (if possible one large sheet and one small sheet) according to manufacturer's and job specifications, enterprise procedures and the listed Performance Criteria.

Context of and specific resources for assessment

Assessment must ensure:

assessment may take place on the job, off the job or a combination of these

off the job assessment must be undertaken in a closely simulated workplace environment.

Method of assessment

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:

direct questioning combined with review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:

ICPSU202C Prepare, load and unload product on and off machine

ICPSU207C Prepare machine for operation (basic)

ICPSU208C Operate and monitor machines (basic).

Required Skills and Knowledge

Required skills

communication by accurately completing production records according to enterprise procedures

problem solving by identifying and reporting faults in machine operation according to enterprise procedures

planning and organising by setting up the machine in minimum time with minimal wastage

teamwork by maintaining the production process in association with others and organising a sample inspection

use of technology by setting up a machine for basic cutting

Required knowledge

information concerning cutting that should be found in the job documentation or production control system

OHS factors that must be considered when handling knife blades during the knife change operation?

factors that indicate a new blade is needed

problems arising from using a dull blade continuously

identifying a sharp knife from a dull knife

need to replace a cutting stick

OHS factors that must be considered when setting up and operating the machine

factors that should be considered when setting up a guillotine for cutting

choosing correct clamping pressure for a given job

OHS factors that must be considered when checking and adjusting the machine

aspects of the cutting that result should be checked against the sample

steps that should be taken if the cutting result does not coincide with the sample

OHS factors that must be considered when maintaining the production process

reporting procedures that should be followed if the machine malfunctions

treat/dispose of guillotine waste

part of the guillotine that should be checked if, after a cut, the top sheets are out-of-square?

part of the guillotine that should be checked if, after a cut, the top sheets are creasing across the cut line?

the need for machine lubrication

information about correct types and methods of lubrication

OHS factors that must be considered when shutting down or cleaning a machine

special operations that are essential when shutting down the machine

quality aspects that should be considered in a completed cutting job

machine manuals, safety and other documentation that are relevant to this task and where they are kept

documentation and information that is included in these documents

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Cutting process may include:

single knife, manual guillotines

Cutting units may include:

range of semi-automated, hand feed or delivery, low volume/speed guillotines

Cuttingsequence may include:

simple cutting sequence

Substrates may include:

range of substrates in categories of:

paper

paperboard

corrugated board

plastics.

Substrate handling may include:

large or small sheet handling systems