The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for job
|
|
Job specifications are read and interpreted from job documentation or production control system Completed |
Evidence:
|
Set-up is carried out correctly in minimum time with minimum wastage Completed |
Evidence:
|
Availability of all job related components is checked Completed |
Evidence:
|
Mount flat-bed cutting devices
|
|
Cutting devices are correctly mounted Completed |
Evidence:
|
Cutting devices are registered and proofed Completed |
Evidence:
|
Appropriate cutting devices are selected and secured to machine according to job specifications Completed |
Evidence:
|
Set up reel system (OR Element 4)
|
|
Unwind and rewind reels are set up and adjusted according to job specifications Completed |
Evidence:
|
Webbing procedures are carried out according to enterprise procedures Completed |
Evidence:
|
Web control system is set up and adjusted according to job specifications Completed |
Evidence:
|
Reels are spliced/joined according to job specifications Completed |
Evidence:
|
Folder and sheeter are set up and adjusted according to job specifications Completed |
Evidence:
|
Set up sheet system (OR Element 3)
|
|
Feeder and delivery systems are set up and adjusted according to job specifications Completed |
Evidence:
|
Sheet pick-up and transportation system is set up and adjusted according to job specifications Completed |
Evidence:
|
Transfer systems are set up and adjusted according to job specifications Completed |
Evidence:
|
Substrate is removed from process according to job specifications Completed |
Evidence:
|
Set up machine
|
|
Flat-bed cutting devices are set up and adjusted according to job specifications Completed |
Evidence:
|
Cutting pressures are set up and adjusted according to job specifications Completed |
Evidence:
|
Machine lays are set to correct position for registration Completed |
Evidence:
|
Assist in set up for other in-line processes
|
|
Assistance is given in set up of in-line printing/ converting/binding units. (NOTE: if entire set up is completed, refer to appropriate competency standards) Completed |
Evidence:
|
Minor in-line printing processes (date stamping, numbering) are set up correctly (if relevant) Completed |
Evidence:
|
Conduct sample run
|
|
Material to be used for sample is organised correctly Completed |
Evidence:
|
Machine is set up and operated to produce a specified sample according to OHS requirements, manufacturer's specifications and enterprise procedures Completed |
Evidence:
|
Sample is visually inspected and/or tested or laboratory testing is organised according to enterprise procedures Completed |
Evidence:
|
Results are interpreted to determine adjustment requirements Completed |
Evidence:
|
Adjustment changes are carried out according to product and machine specifications Completed |
Evidence:
|