NTISthis.com

Evidence Guide: ICPCF3106C - Set up machine for basic carton folding and gluing

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

ICPCF3106C - Set up machine for basic carton folding and gluing

What evidence can you provide to prove your understanding of each of the following citeria?

Set up carton blank transportation system

  1. Feeder is set up and adjusted according to job specifications
  2. Carton blank pick-up and transportation system is set up and adjusted according to job specifications
  3. Transfer systems are set up and adjusted according to job specifications
Feeder is set up and adjusted according to job specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Carton blank pick-up and transportation system is set up and adjusted according to job specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Transfer systems are set up and adjusted according to job specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Set up carton delivery system

  1. Delivery is set up and adjusted according to job specifications
  2. Substrate is removed from process according to job specifications
Delivery is set up and adjusted according to job specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Substrate is removed from process according to job specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Set up machine for basic folding and gluing (single/continuous)

  1. Folding units are set up and adjusted according to job specifications
  2. Folding rollers/belts/rails are set up and adjusted according to job specifications
  3. Gluing system is set up and adjusted according to job specifications using either glue wheel or one glue head
Folding units are set up and adjusted according to job specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Folding rollers/belts/rails are set up and adjusted according to job specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Gluing system is set up and adjusted according to job specifications using either glue wheel or one glue head

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Conduct sample run

  1. Material to be used for sample is organised correctly
  2. Machine is set up and operated according to OHS requirements, manufacturer's specifications and enterprise procedures to produce a specified sample Slitters are monitored and adjusted according to job specifications
  3. Sample is visually inspected and/or tested for accuracy of folds, fibre tear, opening force, fluff and glue placement according to enterprise procedures
Material to be used for sample is organised correctly

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Machine is set up and operated according to OHS requirements, manufacturer's specifications and enterprise procedures to produce a specified sample Slitters are monitored and adjusted according to job specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Sample is visually inspected and/or tested for accuracy of folds, fibre tear, opening force, fluff and glue placement according to enterprise procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Readjust settings

  1. Results are interpreted to determine adjustment requirements
  2. Adjustment changes are carried out according to product and machine specifications
Results are interpreted to determine adjustment requirements

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Adjustment changes are carried out according to product and machine specifications

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the following is essential:

set up machine to produce a range of simple straight line folded and glued cartons as required in normal production on, for example, a Royal 40, a Bobst Media or a Bobst Domino

demonstrate an ability to find and use information relevant to the task from a variety of information sources

set up machine on at least FOUR occasions for basic straight line folding and gluing of cartons with different weights and sizes of carton board according to manufacturer's and job specifications, enterprise procedures and the listed Performance Criteria

evidence for assessment may be gathered from assessment of the unit of competency alone or through an integrated assessment activity.

Context of and specific resources for assessment

Assessment must ensure:

assessment may take place on the job, off the job or a combination of these. Off the job assessment must be undertaken in a closely simulated workplace environment

for example a Royal 40, a Bobst Media or a Bobst Domino.

Method of assessment

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:

direct questioning combined with review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended

Required Skills and Knowledge

Required skills

OHS in relation to operating machinery such as safely switching off machinery before cleaning is started

communication skills when reading and interpreting job requirements from job documentation or production control system

planning and organising by setting up the carton blank transportation system before setting up for folding and gluing

teamwork when maintaining the production process by working in association with others

using technology by using carton folding and gluing machines

problem solving by interpreting results to determine adjustment requirements

Required knowledge

information concerning folding requirements that you would expect to find in the job documentation or production control system

OHS factors that must be considered when setting up folder transportation and delivery systems

areas of the sheet-fed transportation system that should be monitored to ensure trouble-free operation

areas of the delivery system that should be observed to prevent damage to the finished product

ways that folded sheets can be secured for dispatch

OHS factors that must be considered when setting up and/or adjusting the folding unit

causes of scratching/scuffing of substrate during transportation

speed determination of the machine

problems that can be expected if the machine is running too fast

roller pressures checks for correctness

adjustments made if the sheet is out-of-square

possible reasons for the sheet being out-of-square

adjustments made to ensure that the sheets are not smudging/"scuffing"

adjustments made if the sheet will not leave the folding unit

OHS factors that must be considered when adjusting the inkjet printer

steps that should be taken to ensure correct alignment of the inkjet printer

adjustments made to keep units correctly positioned

OHS areas that must be addressed when setting up these areas of the machine

OHS safeguards that are necessary with hot melt adhesives

determining the correct binding technique for a job

methods of adhesive metering present on the machine

care that should be taken to ensure a neat and clean adhesive binding job

segments of quality assurance that would be inspected at the completion of the sample run

communication action that should be instigated if the job is out-of-square

communication action that should be instigated if ink is too wet for production

communication action that should be instigated if the job does not conform to QA checking

machine manuals and safety documentation that are relevant to this task and where they are kept and information that is included in these documents

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Folding and gluing may include:

straight-line folding and gluing of cartons.

Machines may include:

a Royal 40, a Bobst Media, a Bobst Domino.

Carton board may include:

different weights and sizes of carton board.