NTISthis.com

Evidence Guide: ICPCF312C - Set cutting forme and strippers

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

ICPCF312C - Set cutting forme and strippers

What evidence can you provide to prove your understanding of each of the following citeria?

Cut cutting forme wood

  1. Bridge holes are accurately drilled
  2. Saw cuts accurately match line drawing on cutting forme blank
  3. Holes are reinforced and in register with fixing screws
  4. Knives and creasers are cut and shaped accurately to suit cutting forme
Bridge holes are accurately drilled

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Saw cuts accurately match line drawing on cutting forme blank

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Holes are reinforced and in register with fixing screws

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Knives and creasers are cut and shaped accurately to suit cutting forme

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare knives, creasers and cutting forme rubbers

  1. Knives and creasers are set accurately into place on cutting forme blank
  2. Rubber is located on cutting forme to eject product and waste as required
Knives and creasers are set accurately into place on cutting forme blank

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Rubber is located on cutting forme to eject product and waste as required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Set stripping material

  1. Stripping materials are attached securely and accurately to stripper backing material
  2. Mounting strips are correctly fixed
Stripping materials are attached securely and accurately to stripper backing material

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Mounting strips are correctly fixed

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Proof the cutting forme

  1. Sample meets production order specifications
  2. Cutting forme is adjusted or re-cut if required
Sample meets production order specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cutting forme is adjusted or re-cut if required

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Maintain cutting forme and stripper

  1. Correct number is allocated to cutting formes/ strippers and recorded
  2. Cutting forme machine is cleaned according to OHS and enterprise procedures
  3. Problems are accurately described to supervisor/ maintenance department
  4. Status of cutting formes/strippers is reported correctly and without delay to production
Correct number is allocated to cutting formes/ strippers and recorded

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Cutting forme machine is cleaned according to OHS and enterprise procedures

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Problems are accurately described to supervisor/ maintenance department

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Status of cutting formes/strippers is reported correctly and without delay to production

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the following is essential:

correctly setting the cutting formes and strippers according to job specifications and within the production timeframe

demonstrate an ability to find and use information relevant to the task from a variety of information sources

prepare TWO cutting formes (ONE large ONE small) to accommodate TWO differing typically used substrates using all of the relevant processes according to manufacturer's and job specifications, enterprise procedures and the listed Performance Criteria.

Context of and specific resources for assessment

Assessment must ensure:

assessment may take place on the job, off the job or a combination of these

off the job assessment must be undertaken in a closely simulated workplace environment.

Method of assessment

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:

direct questioning combined with review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:

ICPCF311C Prepare for cutting forme and stripper making.

Required Skills and Knowledge

Required skills

OHS in relation to operating machinery such as safely switching off machinery before cleaning is started

communication skills by recording the cutting forme/stripper identification number and reporting problems to supervisors or the maintenance department

planning and organising by cleaning the cutting forme machine according to OHS and enterprise procedures

teamwork when setting cutting formes and strippers in a workplace context

using technology by using cutting formes and strippers

problem solving by noting cutting forme making machine maintenance problems

Required knowledge

checks made to correctly position bridge holes

reinforcing bridge holes

checks that can be performed to ensure that the saw cuts accurately match the line drawings

checks made when cutting and shaping the knives and creasers

OHS concerns that are there when setting knives

factors that determine the amount of rubber attached to the forme

factors that determine the positioning of the rubber on the forme

important items to consider when setting the knives and creasers into position on the forme blank

checks made when attaching stripping materials to stripper backing materials

completing the attachment of stripper materials accurately

purpose of the mounting strips

areas that must be proofed to ensure that the cutting forme meets the production order specifications

importance of allocating numbers to each forme

method of recording the forme allocation numbers that is the accepted formula

OHS factors that must be considered when cleaning the machine

areas of the machine that need regular cleaning

materials that need to be cleaned from the machine

keeping the machine clear of surface rust (condensation)

recommended cleaning agents

method of recording and reporting machine maintenance problems

indicators that show that the machine is in need of oiling/greasing

conditions to be noted when noting/reporting the status of the cutting forme or stripper

importance of monitoring the condition of the forme and stripper

machine manuals, safety and other documentation that are relevant to this task and where they are kept and information that is included in these documents

other sources of information that are available

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Enterprise procedures may include:

range of enterprise procedures within defined work area.

Complexity of process may include:

varied cutting formes according to manufacturer's differentiations.

Quality processesandstandards may include:

should meet client requirements and enterprise and industry standards.