The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare job
|
|
Job specifications are read and interpreted from job documentation or production control system Completed |
Evidence:
|
Set-up is planned and carried out correctly in minimum time with minimum wastage Completed |
Evidence:
|
Availability of all job related components is checked Completed |
Evidence:
|
Grip and lay edges of sheet are identified Completed |
Evidence:
|
Install and replace cutting knives into machine
|
|
Appropriate knives are selected and safely secured to machine Completed |
Evidence:
|
Dull knives are removed and bolted securely to protective board Completed |
Evidence:
|
Cutting sticks are replaced when necessary Completed |
Evidence:
|
Set up machine for guillotining
|
|
Guillotine is set up and adjusted according to job specifications Completed |
Evidence:
|
Clamping pressures are set up and adjusted according to job specifications Completed |
Evidence:
|
Conduct sample cut
|
|
Material to be used for sample is organised correctly Completed |
Evidence:
|
Machine is set up and operated to produce a specified sample according to OHS requirements, manufacturer's specifications and enterprise procedures Completed |
Evidence:
|
Sample is visually inspected and/or tested or laboratory testing is organised according to enterprise procedures Completed |
Evidence:
|
Results are interpreted to determine adjustment requirements Completed |
Evidence:
|
Adjustment changes are carried out according to product and machine specifications Completed |
Evidence:
|
Maintain guillotining process
|
|
Knife and cutting stick condition is monitored and adjusted to ensure the quality of product meets the standard of the approved sample Completed |
Evidence:
|
Cutting pressures are monitored and adjusted to ensure the quality of product meets the standard of the approved sample Completed |
Evidence:
|
Registration of knives is monitored and adjusted to ensure quality of product meets the standard of the approved sample Completed |
Evidence:
|
Maintain operation of production process
|
|
Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule Completed |
Evidence:
|
Production is maintained according to OHS requirements, manufacturer's specifications and enterprise procedures Completed |
Evidence:
|
Manual and/or automatic control is used according to job specifications Completed |
Evidence:
|
Performance is monitored and verified using the process control system according to enterprise procedures Completed |
Evidence:
|
Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention Completed |
Evidence:
|
Process adjustments to eliminate problems are reported according to enterprise procedures Completed |
Evidence:
|
Faulty performance of equipment is identified and reported according to enterprise procedures Completed |
Evidence:
|
Waste is sorted according to enterprise procedures Completed |
Evidence:
|
Identify and rectify problems and faults
|
|
Problems in guillotining machine operation are identified and reported according to enterprise procedures Completed |
Evidence:
|
Adjustments or corrections are carried out according to specified procedures and are consistent with operator's skill level Completed |
Evidence:
|
Guillotining machine operation is checked to ensure correct operation Completed |
Evidence:
|
Conduct shutdown of production process
|
|
Correct shutdown sequence is followed according to manufacturer's specifications and enterprise procedures Completed |
Evidence:
|
Shutdown is conducted in association with fellow workers and in compliance with OHS requirements Completed |
Evidence:
|
Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures Completed |
Evidence:
|
Machine faults requiring repair are identified and reported to designated person according to enterprise procedures Completed |
Evidence:
|
Repair/adjustment is verified prior to resumption of operations Completed |
Evidence:
|
Clean guillotining machine at end of run
|
|
Knife and machine bed are cleaned ready for next run Completed |
Evidence:
|
Cutting machine is disengaged and cleaned ready for next run Completed |
Evidence:
|
Production records or other documentation are accurately completed where required by enterprise procedures Completed |
Evidence:
|