The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for job
|
|
Job specifications are read and interpreted from job documentation or production control system Completed |
Evidence:
|
Set-up is planned and carried out correctly in minimum time with minimum wastage Completed |
Evidence:
|
Availability of all job related components is checked Completed |
Evidence:
|
Set up reel system (OR Element 3)
|
|
Unwind and rewind reels are set up and adjusted according to job specifications Completed |
Evidence:
|
Webbing procedures are carried out according to job specifications Completed |
Evidence:
|
Web control system is set up and adjusted according to job specifications Completed |
Evidence:
|
Reels are spliced/joined according to job specifications Completed |
Evidence:
|
Set up sheet/section system (OR Element 2)
|
|
Feeder and delivery systems are set up and adjusted according to job specifications Completed |
Evidence:
|
Sheet/section/reel pick-up and transportation system is set up and adjusted according to job specifications Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule Completed |
Evidence:
|
Transfer systems are set up and adjusted according to job specifications Completed |
Evidence:
|
Substrate is removed from the process according to job specifications Completed |
Evidence:
|
Sheet/section/reel transfer and control system is set up and adjusted according to job specifications Completed |
Evidence:
|
Set up machine and in-line units
|
|
Collating/inserting system is set up and adjusted according to job specifications Completed |
Evidence:
|
Minor in-line printing/converting/binding units are set up for basic processes and adjusted according to machine requirements and job specifications Completed |
Evidence:
|
Assistance is given in set up of major in-line printing/converting/binding units (NOTE: if entire set up is completed, refer to appropriate competency standards) Completed |
Evidence:
|
Conduct sample run
|
|
Material to be used for sample is organised correctly Completed |
Evidence:
|
Machine is set up and operated to produce a specified sample according to OHS requirements, manufacturer's specifications and enterprise procedures Completed |
Evidence:
|
Sample is visually inspected and/or tested or laboratory testing is organised according to enterprise procedures Completed |
Evidence:
|
Results are interpreted to determine adjustment requirements Completed |
Evidence:
|
Adjustment changes are carried out according to product and machine specifications Completed |
Evidence:
|