The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Confirm routine job specifications
|
|
Job requirements are read and interpreted from job documentation or production control system Completed |
Evidence:
|
Set up is carried out correctly in minimum time with minimum wastage Completed |
Evidence:
|
Prior inspections are completed and signed off Completed |
Evidence:
|
Prepare flexographic plates
|
|
Plate height and relief are measured Completed |
Evidence:
|
Plates are trimmed and prepared according to mounting system requirements Completed |
Evidence:
|
Mounting adhesive is selected to achieve correct PCD (Pitch Circle Diameter) of specified plate cylinders and gears Completed |
Evidence:
|
Prepare plate cylinders
|
|
Plate cylinders/seamless sleeves are selected, cleaned and prepared and correct gears are mounted Completed |
Evidence:
|
Sleeves and correct gears on mandrels are selected, cleaned, prepared and mounted to meet routine job specifications Completed |
Evidence:
|
TIR (Total Indicated Runout) is checked to be within specified tolerances on plate cylinders Completed |
Evidence:
|
Selected mounting adhesive is applied to plate cylinders Completed |
Evidence:
|
Mount and/or proof flexographic plates on mounting/proofing machine
|
|
Plates are prepared and mounted on cylinders using pin mount or microdot systems or sleeves according to chart number/print direction OR Completed |
Evidence:
|
Plate mounting sheet is prepared to meet routine job specifications AND Completed |
Evidence:
|
Plates are mounted to position on plate mounting sheet or camera targets AND Completed |
Evidence:
|
Plate mounting sheet is installed and tensioned onto plate cylinder to specified chart number/print direction Completed |
Evidence:
|
Plates are proofed and each plate cylinder is checked for register Completed |
Evidence:
|
Flexographic plates are trimmed and taped down according to printing press requirements Completed |
Evidence:
|