The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Maintain routine operation of reel system (OR Element 2)
|
|
Reel stand and rewind section are is monitored and adjusted to maintain correct tension and to ensure no marks or blemishes to finished product and to ensure efficient continuous operation Completed |
Evidence:
|
Web control system is monitored and adjusted to ensure correct tension and accurate continuous positioning of the web for efficient operation Completed |
Evidence:
|
Substrate is added to and removed from process according to job instructions Completed |
Evidence:
|
Sheeting section is monitored and adjusted to ensure quality and efficient product delivery Completed |
Evidence:
|
Maintain routine operation of sheet system (OR Element 1)
|
|
Feeder and delivery sections are is monitored and adjusted to ensure continuous and efficient feeding to machine Completed |
Evidence:
|
Sheet pick-up and transport system is monitored and adjusted to ensure accurate and continuous sheet handling and efficient operation Completed |
Evidence:
|
Transfer systems are monitored and adjusted to ensure correct and continuous sheet handling and efficient operation Completed |
Evidence:
|
Substrate is added to and removed from process according to job instructions Completed |
Evidence:
|
Maintain basic routine lithographic printing process
|
|
Lithographic plate and plate cylinder condition is monitored and adjusted to ensure the quality of printed product meets the standard of the approved proof Completed |
Evidence:
|
Lithographic blanket and blanket cylinder condition is monitored and adjusted to ensure the quality of printed product meets the standard of approved proof Completed |
Evidence:
|
Lithographic impression cylinder condition is monitored and adjusted to ensure quality of printed product meets the standard of approved proof Completed |
Evidence:
|
Lithographic inking condition is checked and maintained to ensure quality of printed product meets the standard of approved proof Completed |
Evidence:
|
Lithographic dampening system condition is monitored and adjusted maintained to ensure quality of printed product meets the standard of approved proof Completed |
Evidence:
|
Maintain routine production process
|
|
Production process is operated in association with fellow workers and according to company specifications and planned daily schedule Completed |
Evidence:
|
Production is maintained within OHS requirements and company and manufacturer's specifications Completed |
Evidence:
|
Manual and/or automatic control is used as per specification Completed |
Evidence:
|
Performance is monitored and verified according to enterprise procedures Completed |
Evidence:
|
In performance, colour, register and position of print are monitored and adjusted maintained throughout production run Completed |
Evidence:
|
Faulty performance of equipment is identified and reported according to enterprise procedures Completed |
Evidence:
|
Waste is sorted according to enterprise procedures Completed |
Evidence:
|
Rectify minor lithographic machine faults
|
|
Adjustments or corrections are carried out according to specified procedures and consistent with operator's skill level Completed |
Evidence:
|
Problems with lithographic machine operation is identified and reported according to enterprise procedures Completed |
Evidence:
|
Lithographic machine operation is checked to ensure correct operation Completed |
Evidence:
|
Conduct shutdown of production process
|
|
Correct shutdown sequence is followed according to manufacturer's specifications and enterprise procedures Completed |
Evidence:
|
Shutdown is conducted in association with fellow workers and in compliance with OHS requirements Completed |
Evidence:
|
Unused ink is correctly labelled and stored according to manufacturer/supplier specifications and enterprise procedures Completed |
Evidence:
|
Solid and liquid waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures Completed |
Evidence:
|
All product is removed from operating area Completed |
Evidence:
|
Machine faults requiring repair are identified and reported to designated person according to enterprise procedures Completed |
Evidence:
|
Repair/adjustment is verified prior to resumption of operations Completed |
Evidence:
|
Clean and wash up printing machine at end of print run
|
|
Cylinders, plate and roller surfaces are cleaned ready for next run Completed |
Evidence:
|
Inking system and dampening system are washed up ready for next run, and liquid waste is disposed of according to company and regulatory requirements Completed |
Evidence:
|
In-line printing/converting/binding/finishing units are cleaned ready for next run Completed |
Evidence:
|
Reef Reel-fed, transportation and delivery systems are disengaged and cleaned ready for next run Completed |
Evidence:
|
Sheet feed, transport and delivery system are disengaged and cleaned ready for next run Completed |
Evidence:
|
Production records or other documentation are accurately completed where required by enterprise procedures Completed |
Evidence:
|