The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Maintain operation of reel system (OR Element 2 OR Element 3)
|
|
Reel stand and rewind section is monitored and adjusted to maintain correct tension and to ensure no marks, blemishes or damage to finished product and to ensure efficient continuous operation Completed |
Evidence:
|
Web control system is monitored and adjusted to ensure correct tension and accurate continuous positioning of the web and efficient operation Completed |
Evidence:
|
Substrate is added to and removed from process according to job instructions Completed |
Evidence:
|
Sheeting section is monitored and adjusted to ensure quality and efficient product delivery Completed |
Evidence:
|
Set-off/marking prevention system is monitored and adjusted to ensure quality of printed product without set-off or marking meets the standard of approved proof Completed |
Evidence:
|
Maintain operation of sheet system (OR Element 1 OR Element 3)
|
|
Feeder and delivery is monitored and adjusted to ensure continuous and efficient feeding to machine Completed |
Evidence:
|
Sheet pick-up and transport system is monitored and adjusted to ensure accurate and continuous sheet handling and efficient operation Completed |
Evidence:
|
Transfer systems are monitored and adjusted to ensure correct and continuous sheet handling and efficient operation Completed |
Evidence:
|
Substrate is added to and removed from process according to job instructions Completed |
Evidence:
|
Set-off/marking prevention system is monitored and adjusted to ensure quality of printed product without set-off or marking meets the standard of approved proof Completed |
Evidence:
|
Maintain in-line loading and ejection (OR Element 4 OR Element 5)
|
|
In-line loading is monitored and adjusted to ensure quality and efficient product delivery Completed |
Evidence:
|
In-line ejection is monitored and adjusted to ensure quality and efficient product delivery Completed |
Evidence:
|
Maintain production process
|
|
Production process is operated in association with fellow workers and according to company specifications and planned daily schedule Completed |
Evidence:
|
If necessary, the location of objects into fixtures/jigs is monitored and adjusted Completed |
Evidence:
|
Foil transfer system is monitored and adjusted to ensure quality of printed product meets the standard of approved proof Completed |
Evidence:
|
Basic in-line printing/converting/binding/finishing process(es) are monitored and adjusted to ensure quality of product meets the standard of the approved proof Completed |
Evidence:
|
Production is maintained within OHS requirements and company and manufacturer's specifications Completed |
Evidence:
|
Manual and/or automatic control is used as per specification Completed |
Evidence:
|
Performance is monitored and verified using the process control system according to enterprise procedures Completed |
Evidence:
|
Foil performance and position of print are monitored and adjusted throughout production run Completed |
Evidence:
|
Waste is sorted according to enterprise procedures Completed |
Evidence:
|
Identify and rectify problems
|
|
Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention Completed |
Evidence:
|
Process adjustments to eliminate problems are reported according to enterprise procedures Completed |
Evidence:
|
Faulty performance of equipment is identified and reported according to enterprise procedures Completed |
Evidence:
|
Problem in foil stamping machine operation is identified and reported according to enterprise procedures Completed |
Evidence:
|
Adjustments or corrections are carried out according to specified procedures and consistent with operator's skill level Completed |
Evidence:
|
Foil stamping machine operation is checked to ensure correct operation Completed |
Evidence:
|
Conduct shutdown of production process
|
|
Correct shutdown sequence is followed according to manufacturer's specifications and enterprise procedures Completed |
Evidence:
|
Shutdown is conducted in association with fellow workers and in compliance with OHS requirements Completed |
Evidence:
|
Unused foil is correctly labelled and stored according to manufacturer/supplier specifications and enterprise procedures Completed |
Evidence:
|
Waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures Completed |
Evidence:
|
All product is removed from operating area Completed |
Evidence:
|
Machine faults requiring repair are identified and reported to designated person according to enterprise procedures Completed |
Evidence:
|
Repair/adjustment is verified prior to resumption of operations Completed |
Evidence:
|
Clean printing machine at end of print run
|
|
In-line printing/converting/binding/finishing units are cleaned ready for next run Completed |
Evidence:
|
Reel feed, transportation and delivery systems are disengaged and cleaned ready for next run OR Completed |
Evidence:
|
Sheet feed, transport and delivery systems are disengaged and cleaned ready for next run OR Completed |
Evidence:
|
Jig and conveyors are disengaged and cleaned ready for next run Completed |
Evidence:
|
Production records or other documentation are accurately completed where required by enterprise procedures Completed |
Evidence:
|