The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Maintain operation of reel system
|
|
Reel stand and rewind sections are monitored to ensure efficient continuous operation, correct tension and to ensure no marks or blemishes to finished product Completed |
Evidence:
|
Web control system is monitored and adjusted to ensure correct tension and accurate continuous positioning of the web for efficient operation Completed |
Evidence:
|
Substrate is added to and removed from process according to job instructions Completed |
Evidence:
|
Sheeting section is monitored and adjusted to ensure quality and efficient product delivery Completed |
Evidence:
|
Set-off/marking prevention system is monitored and adjusted to ensure the quality of the printed product meets the standard of the approved proof Completed |
Evidence:
|
Maintain operation of sheet system
|
|
Feeder and delivery sections are monitored and adjusted to ensure continuous and efficient feeding to machine Completed |
Evidence:
|
Sheet pick-up and transport system is monitored and adjusted to ensure accurate and continuous sheet handling and efficient operation Completed |
Evidence:
|
Transfer system is monitored and adjusted to ensure correct and continuous sheet handling and efficient operation Completed |
Evidence:
|
Substrate is added to and removed from the process according to job instructions Completed |
Evidence:
|
Set-off/marking prevention system is monitored and adjusted to ensure the quality of the printed product meets the standard of the approved proof Completed |
Evidence:
|
Maintain basic routine relief printing process
|
|
Relief forme or plate cylinder condition is monitored and adjusted to ensure the quality of the printed product meets the standard of the approved proof Completed |
Evidence:
|
Relief impression surface condition is monitored and adjusted to ensure the quality of the printed product meets the standard of the approved proof Completed |
Evidence:
|
Relief inking system is monitored and adjusted to ensure the quality of the printed product meets the standard of the approved proof Completed |
Evidence:
|
Maintain routine production process
|
|
Production process is implemented in association with fellow workers and according to company specifications and planned daily schedule Completed |
Evidence:
|
Production is maintained within OHS requirements and company and manufacturer's specifications Completed |
Evidence:
|
Manual and/or automatic control is used according to specification Completed |
Evidence:
|
Performance is monitored and verified using the process control system according to enterprise procedures Completed |
Evidence:
|
Ink performance, colour, register and position already included in line embellishments of print are monitored and adjusted throughout production run Completed |
Evidence:
|
Production difficulties are anticipated and action is taken to prevent occurrence by timely intervention Completed |
Evidence:
|
Process adjustments to eliminate problems are reported according to enterprise procedures Completed |
Evidence:
|
Waste is sorted according to enterprise procedures Completed |
Evidence:
|
Identify and rectify problems
|
|
Problem in relief machine operation is identified and reported according to enterprise procedures Completed |
Evidence:
|
Adjustments or corrections are carried out according to specified procedures Completed |
Evidence:
|
Relief machine operation is checked to ensure correct operation Completed |
Evidence:
|
Conduct shutdown of production process
|
|
Shutdown is conducted in association with fellow workers and in compliance with OHS requirements Completed |
Evidence:
|
Unused ink is correctly labelled and stored according to manufacturer/supplier specifications and enterprise procedures Completed |
Evidence:
|
Solid and liquid waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures Completed |
Evidence:
|
Embellishment equipment is correctly labelled and stored according to manufacturer/supplier specifications and enterprise procedures Completed |
Evidence:
|
All product is removed from operating area Completed |
Evidence:
|
Machine faults requiring repair are identified and reported to designated person according to enterprise procedures Completed |
Evidence:
|
Repair/adjustment is verified prior to resumption of operations Completed |
Evidence:
|
Clean and wash up printing machine at end of print run
|
|
Cylinders, plate and roller surfaces are cleaned ready for next run Completed |
Evidence:
|
Inking system is washed up ready for next run, and liquid waste is disposed of according to company and regulatory requirements Completed |
Evidence:
|
In-line printing/converting/binding/finishing units are cleaned ready for next run Completed |
Evidence:
|
Reel feed, transportation and delivery systems are disengaged and cleaned ready for next run Completed |
Evidence:
|
Sheet feed, transport and delivery systems are disengaged and cleaned ready for next run Completed |
Evidence:
|
Production records or other documentation are accurately completed where required by enterprise procedures Completed |
Evidence:
|