The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Confirm non-routine job specifications
|
|
Job requirements are read and interpreted from job documentation or production control system Completed |
Evidence:
|
Set up is planned and carried out correctly in minimum time with minimum wastage Completed |
Evidence:
|
Availability of all job related components is checked Completed |
Evidence:
|
Proofed job is checked for conformance with job specifications Completed |
Evidence:
|
Set up reel transportation and delivery system on web-fed machine
|
|
Reels are checked for treatment levels, coatings and printing side, and age of product Completed |
Evidence:
|
Unwind reels are secured on reel shaft Completed |
Evidence:
|
Reels are correctly positioned on unwind stand Completed |
Evidence:
|
Press is webbed for surface or reverse or perfecting printing according to non-routine job specifications Completed |
Evidence:
|
Edge guide is centred and set to non-routine job specifications Completed |
Evidence:
|
Unwind tension is set to suit substrate Completed |
Evidence:
|
Rewind tension is set to suit substrate Completed |
Evidence:
|
Positively Infinitely Variable (PIV) drive is set for appropriate tensioning of substrate Completed |
Evidence:
|
Select and prepare inks and solvents
|
|
Inks and solvents are selected according to job specifications and end-user requirements Completed |
Evidence:
|
Quality and suitability of inks and solvents are checked and appropriate action is taken Completed |
Evidence:
|
Inks and solvents are prepared according to work health and safety (WHS) requirements, and manufacturer’s/supplier’s instructions with suitable precautions to minimise waste Completed |
Evidence:
|
Correct colour and weight/volume of ink are mixed and viscosities checked and modified according to press requirements and non-routine job specifications Completed |
Evidence:
|
Ink formula and approved colour draw-downs are appropriately recorded Completed |
Evidence:
|
Inks and solvents are appropriately labelled, handled and stored according to manufacturer’s/supplier’s instructions and relevant hazardous liquids storage regulations Completed |
Evidence:
|
Set up machine for complex flexographic printing
|
|
Flexographic plate cylinders are installed, and register adjustments centred Completed |
Evidence:
|
OR
|
|
Sleeves are installed in press and register adjustments made Completed |
Evidence:
|
Set up in-line units for basic process/es
|
|
Minor in-line printing/converting/binding units are set up for basic process/es and adjusted according to machine requirements and job specifications Completed |
Evidence:
|
Assistance is given in set-up of major in-line printing/converting/binding units Completed |
Evidence:
|
Conduct proof run
|
|
Material to be used for proof is organised correctly Completed |
Evidence:
|
Press is set up and operated according to WHS guidelines Completed |
Evidence:
|
Print impressions are set to minimum kiss impression Completed |
Evidence:
|
Web tensions are correctly set at unwind, between stations and rewind Completed |
Evidence:
|
Drying is checked as sufficient to key ink to the substrate Completed |
Evidence:
|
Viscosities are adjusted to obtain correct colour at proof speed and checked against colour matching system Completed |
Evidence:
|
Substrate is checked against job specifications Completed |
Evidence:
|
Organise proof inspection and/or testing
|
|
Proof is visually inspected and/or tested or laboratory testing is organised according to enterprise procedures Completed |
Evidence:
|
Production does not commence without client approval or authority where appropriate Completed |
Evidence:
|
Readjust settings to production speed
|
|
Production speed print results are interpreted and appropriate adjustments are made to press, ink and substrate settings Completed |
Evidence:
|
Adjustments are made according to product specifications and press performance Completed |
Evidence:
|
Web is spliced at production speed and further samples are obtained for quality inspections at appropriate intervals Completed |
Evidence:
|
Press settings are documented and samples are retained Completed |
Evidence:
|