The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Maintain operations of delivery systems
|
|
Delivery systems are monitored and adjusted to ensure efficient and continuous operation and avoid damage to finished product Completed |
Evidence:
|
Substrate is added to and removed from process according to job instructions Completed |
Evidence:
|
Maintain coating process
|
|
Roller condition is monitored and adjusted to ensure quality of printed product meets the approved proof standard Completed |
Evidence:
|
Coating system and doctor blade condition (if appropriate) are monitored and adjusted to ensure quality of product meets the approved proof standard Completed |
Evidence:
|
Drying systems are monitored and adjusted to ensure quality of product meets the approved proof standard Completed |
Evidence:
|
Quality and viscosity of varnish coatings are monitored and adjusted as necessary to ensure product quality Completed |
Evidence:
|
Maintain production process
|
|
Basic or complex in-line printing/converting/binding/finishing processes are monitored and adjusted to ensure quality of product meets the approved proof standard Completed |
Evidence:
|
Production process is operated in association with fellow workers and according to company specifications and planned daily schedule Completed |
Evidence:
|
Production is maintained within work health and safety (WHS) requirements, and company and manufacturer’s specifications Completed |
Evidence:
|
Manual and/or automatic control is used as per specification Completed |
Evidence:
|
Performance is monitored and verified using the process control system according to enterprise procedures Completed |
Evidence:
|
Coating performance, register and position are monitored and adjusted throughout production run Completed |
Evidence:
|
Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention Completed |
Evidence:
|
Process adjustments to eliminate problems are reported according to enterprise procedures Completed |
Evidence:
|
Waste is sorted according to enterprise procedures Completed |
Evidence:
|
Identify and rectify problems
|
|
Faulty performance of equipment is identified and reported according to enterprise procedures Completed |
Evidence:
|
Problems in coating machine are identified and reported according to enterprise procedures Completed |
Evidence:
|
Adjustments or corrections are carried out according to specified procedures and consistent with operator’s skill level Completed |
Evidence:
|
Coating machine operation is checked to ensure correct operation Completed |
Evidence:
|
Conduct shutdown of production process
|
|
Correct shutdown sequence is followed according to manufacturer’s specifications and enterprise procedures Completed |
Evidence:
|
Shutdown is conducted in association with fellow workers and in compliance with WHS requirements Completed |
Evidence:
|
Solid and liquid waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures Completed |
Evidence:
|
All product is removed from operating area Completed |
Evidence:
|
Machine faults requiring repair are identified and reported to designated person according to enterprise procedures Completed |
Evidence:
|
Repair/adjustment is verified prior to resumption of operations Completed |
Evidence:
|
Clean and wash up coating machine at end of print run
|
|
Cylinders, plate and roller surfaces are cleaned ready for next run Completed |
Evidence:
|
Coating delivery system is washed ready for next run, and liquid waste is disposed of according to company and regulatory requirements Completed |
Evidence:
|
In-line slitting units are cleaned ready for next run Completed |
Evidence:
|
Reef feed, transportation and delivery systems are disengaged and cleaned ready for next run Completed |
Evidence:
|
Production records or other documentation are accurately completed where required by enterprise procedures Completed |
Evidence:
|