The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for installation
|
|
Obtain relevant legislation, codes, regulations and standards for the job Completed |
Evidence:
|
Obtain project plan to scope work and then obtain approval from client on key features of installation Completed |
Evidence:
|
Arrange for site access to comply with landholder, government and statutory body regulations Completed |
Evidence:
|
Inspect site to develop work health and safety (WHS) plan and notify appropriate personnel of identified safety hazards Completed |
Evidence:
|
Determine cable route and type of network cable equipment from project plan, taking into account the location of other services Completed |
Evidence:
|
Obtain required plant, tools, safety equipment and materials for cabinet entry Completed |
Evidence:
|
Coordinate with other parties to minimise disruption to services and down time Completed |
Evidence:
|
Segregate incoming and outgoing cables to facilitate access and avoid overlaying and backtracking of cable Completed |
Evidence:
|
Notify stakeholders of proposed cutover details and proposed disruption to services Completed |
Evidence:
|
Undertake additional preparatory non-jointing work, as required, according to client practices and site conditions Completed |
Evidence:
|
Install required cable and termination modules
|
|
Follow WHS and environmental requirements for given work Completed |
Evidence:
|
Evaluate existing termination module type and capacity Completed |
Evidence:
|
Install additional termination modules, if required, and modify existing housing capacity according to manufacturer’s specifications and industry practice Completed |
Evidence:
|
Determine cable route between the parent jointing chamber and the cable termination blocks to comply with client practices, site limitations, equipment specifications and regulations Completed |
Evidence:
|
Select entry port and sealing arrangements Completed |
Evidence:
|
Install cable to cabinet Completed |
Evidence:
|
Arrange and distribute cable fan out and routing according to industry practice Completed |
Evidence:
|
Joint, jumpering and cutover cable
|
|
Joint cable according to jointing standards, materials, joint type, location, client practices and manufacturer’s guidelines Completed |
Evidence:
|
Install jumpers and cut away tails to industry practice and to minimise service outages Completed |
Evidence:
|
Test cable for performance and rectify any faults relating to cutover according to location, materials available and industry practice Completed |
Evidence:
|
Seal all joints and cabinet according to cable type, location, client practices and manufacturer’s guidelines Completed |
Evidence:
|
Perform tests
|
|
Visually check that all connections and interconnections are firm and sound Completed |
Evidence:
|
Electrically test all terminations for continuity according to client practices Completed |
Evidence:
|
Reseal and pressurise cables Completed |
Evidence:
|
Complete site restoration and project documentation
|
|
Supply test results to the client for future reference Completed |
Evidence:
|
Complete cut over report and design amendments report (As Built) to show final cable layout Completed |
Evidence:
|
Recover obsolete materials and return to appropriate point for disposal Completed |
Evidence:
|
Restore siteaccording to client practices or approving authority requirements Completed |
Evidence:
|
Notify appropriate personnel about completion of cutover and obtain sign off Completed |
Evidence:
|