NTISthis.com

Evidence Guide: ICTDRE4166A - Integrate customer digital reception equipment

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

ICTDRE4166A - Integrate customer digital reception equipment

What evidence can you provide to prove your understanding of each of the following citeria?

Evaluate existing customer equipment

  1. Obtain relevant legislation, codes, regulations and standards for compliance when conducting work
  2. Notify customer to verify installation order and arrange for site access to comply with security arrangements
  3. Notify supervisor of identified safety hazards at the worksite and complete a job safety analysis (JSA) before commencing work
  4. Use test equipment to verify that customer equipment is operational prior to installation
  5. Assess equipment capabilities and connection types against customer requirements for suitability
  6. Assess customer premises against installation plan according to client specifications and by-laws, standards and regulations
  7. Produce an installation diagram using appropriate drawing symbols to indicate connection details of customer system
Obtain relevant legislation, codes, regulations and standards for compliance when conducting work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Notify customer to verify installation order and arrange for site access to comply with security arrangements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Notify supervisor of identified safety hazards at the worksite and complete a job safety analysis (JSA) before commencing work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Use test equipment to verify that customer equipment is operational prior to installation

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assess equipment capabilities and connection types against customer requirements for suitability

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assess customer premises against installation plan according to client specifications and by-laws, standards and regulations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Produce an installation diagram using appropriate drawing symbols to indicate connection details of customer system

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Design and build the system

  1. Determine connection pathways for optimal performance of system equipment
  2. Confirm compatibility for proposed connections to existing system
  3. Produce a final design with block diagrams and specifications
  4. Select and connect cables to suit connectivity using appropriate materials
  5. Activate equipment to check for operation of the network
Determine connection pathways for optimal performance of system equipment

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Confirm compatibility for proposed connections to existing system

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Produce a final design with block diagrams and specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select and connect cables to suit connectivity using appropriate materials

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Activate equipment to check for operation of the network

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Provide enterprise equipment

  1. Determine best method of connection to service source according to client specifications
  2. Connect service to system following occupational health and safety (OHS) and environmental requirements and test to verify status of the connection
  3. Notify service provider if identified problems cannot be rectified at the local level
Determine best method of connection to service source according to client specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Connect service to system following occupational health and safety (OHS) and environmental requirements and test to verify status of the connection

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Notify service provider if identified problems cannot be rectified at the local level

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Configure services and optimise customer system

  1. Conduct client specific and customer set-up operations
  2. Test performance of enterprise and customer equipment across a range of settings
  3. Record and evaluate test results to satisfy manufacturer's operational margins
  4. Tune customer equipment for optimal performance
  5. Restore site to original condition and customer satisfaction
Conduct client specific and customer set-up operations

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Test performance of enterprise and customer equipment across a range of settings

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Record and evaluate test results to satisfy manufacturer's operational margins

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tune customer equipment for optimal performance

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Restore site to original condition and customer satisfaction

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Train customer and complete contract documentation

  1. Conduct customer training appropriate to the equipment, services and vendor literature
  2. Complete appropriate records and update administration systems according to enterprise policy
  3. Record and store test results in the appropriate database, leaving copies on site according to enterprise policy
  4. Provide warranties to customer in required format where work and equipment are subject to warranty
  5. Prepare invoices and other financial documentation, where required ,and present to customer
  6. Obtain authorised signatures on required documentation to confirm acceptance of completed work
Conduct customer training appropriate to the equipment, services and vendor literature

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete appropriate records and update administration systems according to enterprise policy

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Record and store test results in the appropriate database, leaving copies on site according to enterprise policy

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Provide warranties to customer in required format where work and equipment are subject to warranty

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Prepare invoices and other financial documentation, where required ,and present to customer

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Obtain authorised signatures on required documentation to confirm acceptance of completed work

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the ability to:

identify the modulation and other signal characteristics of a range of contemporary products

design and build system

install three types of equipment and services applying all related OHS requirements and work practices

configure services and optimise customer system

conduct functionality tests and interpret results

provide customer training appropriate to the equipment

complete the task and handover to customer.

Context of, and specific resources for assessment

Assessment must ensure:

site for DRE integration

DRE currently used in industry

test equipment required for DRE integration.

Methods of assessment

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:

direct observation of the candidate installing three types of equipment and services applying all related OHS requirements and work practices

direct observation of the candidate configuring services and optimising customer system

oral or written questioning of the candidate to assess required knowledge.

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example:

ICTDRE4167A Integrate data delivery modes.

Aboriginal people and other people from a non-English speaking background may have second language issues.

Access must be provided to appropriate learning and assessment support when required.

Assessment processes and techniques must be culturally appropriate, and appropriate to the oral communication skill level, and language and literacy capacity of the candidate and the work being performed.

In all cases where practical assessment is used it will be combined with targeted questioning to assess required knowledge. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency.

Where applicable, physical resources should include equipment modified for people with special needs.

Required Skills and Knowledge

Required skills

communication skills to liaise with customer and colleagues and negotiate with site owner

literacy skills to interpret technical documentation, specifications and service orders

numeracy skills to take measurements and interpret results

planning and organisational skills to provide enterprise equipment

problem solving skills to respond to typical integration challenges

task management skills to:

adhere to all safety requirements

work systematically with required attention to detail

technical skills to:

configure services

design and build system

perform diagnostic procedures

use hand and power tools

use test equipment for signal measurement and other enterprise-specific tools

Required knowledge

analog and digital connectors

contemporary equipment and connection methods

continuity, ingress, egress, signal level and signal quality performance tests

customer service principles, particularly dealing with customers face-to-face

enterprise or service specific knowledge of products and services supplied

equipment types:

amplifiers

couplers

splitters

taps

modulation techniques

objectives and methods of training for product use for customer education

OHS general principles and enterprise-specific JSA requirements

performance adjustments for tuning, balancing and replacing components

quality assurance of enterprise requirements

test analysis and diagnosis (enterprise diagnosis methods)

video and audio fundamentals

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Relevant legislation, codes, regulations and standards may include:

Australian Communications Industry Forum (ACIF) standards and codes

AS Communications Cabling Manual (CCM)
Volume 1

AS/NZS 3000:2007

AS/NZS 3080:2003

AS/NZS 3084:2003

AS/NZS 3085.1:2004

AS/NZS IEC 61935.1:2006

AS/NZS IEC 61935.2:2006

AS/NZS ISO/IEC 14763.3:2007

AS/NZS ISO/IEC 15018:2005

AS/NZS ISO/IEC 24702:2007

cabling security codes and regulations

Environmental Protection Acts

Trades Practices Act

Institute of Electrical and Electronics Engineers (IEEE) standards

ISO Draft 11801

OHS

regulated or industry codes of practice including appropriate Australian Communications and Media Authority (ACMA) standards

technical standards AS/ACIF S008:2006 and AS/ACIF S009:2006.

Safety hazards may refer to:

debris

excessive dust or noise

exposed electrical wiring

exposed machinery

industrial

spilled chemicals

unsafe spatial separation of cables

unsafe structures

wet areas.

Test equipment may include:

multimeter

signal level meter

spectrum analyser.

Customer equipment may include:

devices:

antennas

audio equipment (amplifiers and equalisers)

recorders (disk and hard drive)

speaker systems

TV receivers

digital FTA

hard disk recorder

high definition (HD) TV

home automation

LCD TV

media centre

plasma TV

security systems

simulation consoles

video player

video and audio distribution systems.

Customer premises may include:

alternative construction types, such as mud brick

concrete construction

domestic brick or timber dwelling

multi-level construction.

Client specifications may include:

equipment types

policy, procedures and practices

service level agreements (SLAs)

standards and quality requirements.

By-laws, standards and regulations may include:

Australian and New Zealand standards and cabling regulations

council by-laws for siting equipment and cables

electrical safety factors.

Drawing symbols may include:

audiovisual (AV) system features

common electrical circuit features.

Optimal performance may include:

antenna orientation

aspect ratio

contrast

picture quality

signal amplification adjustment.

Cables may include:

coaxial

optical fibre.

Materials may include:

antennas

cables

joiners

plugs and other connectors

support fittings.

Client may be:

the organisation contracting the work

the organisation providing services.

OHS and environmental requirements may relate to:

identifying other services, including power and gas

personal protective equipment:

earmuffs

gloves

head protection

masks

protective suits

safety boots

safety glasses

safe working practices, such as the safe use and handling of:

chemicals

materials

tools and equipment

safety equipment:

flashing lights

safety barriers

warning signs and tapes

witches hats

special access requirements

environmental considerations:

clean-up protection

stormwater protection

waste management.

Service provider may be:

an internet service provider (ISP) or a delegated organisation acting on their behalf

a registered telecommunications carrier.

Customer may include:

an individual

entity who is the final recipient of the service.

Customer training may include:

customer to operate equipment functions

demonstration to customer

explanation of operating functions as provided in vendor product literature

explanation of relevant equipment functions

feedback to customer on their operation of equipment functions.

Appropriate records may include:

connection records

equipment user guides

invoices.

Warranties may include:

support provided by network service provider

support specified by the equipment manufacturer or supplier.