The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for DWDM planning activities
|
|
Obtain relevant legislation, codes, regulations and standards for compliance when conducting work Completed |
Evidence:
|
Scope the work by obtaining project plan from appropriate personnel and arrange for site access to comply with security arrangements Completed |
Evidence:
|
Notify appropriate personnel of identified safety hazards at the worksite Completed |
Evidence:
|
Plan DWDM installation activities and develop specifications
|
|
Follow work health and safety (WHS) and environmental requirements for given work and identify and avoid other services Completed |
Evidence:
|
Identify tools, safety equipment, plant and machinery for installation work activities Completed |
Evidence:
|
Conduct physical inspections of proposed DWDM sites and verify backbone dark fibre is accessible and available according to cabling plan Completed |
Evidence:
|
Verify proposed backbone and customer fibre cable routes to splicing cabinet and fibre patch panel, and identify barriers to cable installation Completed |
Evidence:
|
Verify proposed power cabling route from distribution board and circuit breakers, and identify barriers to cable installation Completed |
Evidence:
|
Modify cable plan if required and notify appropriate personnel Completed |
Evidence:
|
Prepare fibre installation specifications and power cable and grounding specifications according to cabling plan and safe work practices and manufacturer’s instructions Completed |
Evidence:
|
Verify proposed location of associated hardware racks, cabinets and ironwork, and confirm access to enterprise local area network (LAN) Completed |
Evidence:
|
Prepare DWDM shelf configuration and specifications according to customer requirements
|
|
Prepare a configuration document including configuration plans and specifications for the installation team Completed |
Evidence:
|
Specify location of DWDM shelves or racks and the shelf interconnection fibre cabling layout according to cabling plan Completed |
Evidence:
|
Specify individual DWDM units and circuit card types required to suit customer requirements Completed |
Evidence:
|
Plan preliminary optical tests
|
|
Verify backbone fibres at patch panel and conduct bidirectional optical time domain reflectometer (OTDR) test and record measurement results and OTDR images Completed |
Evidence:
|
Conduct bidirectional optical loss test set (OLTS) measurement of insertion loss on backbone fibres from patch panel to patch panel at adjacent sites and record measurement results Completed |
Evidence:
|
Complete documentation and obtain sign-off
|
|
Provide results of optical measurements to design team Completed |
Evidence:
|
Complete and provide updated specification documentation to installation team Completed |
Evidence:
|
Submit documentation to appropriate person for approval and sign-off Completed |
Evidence:
|