NTISthis.com

Evidence Guide: ICTTEN416 - Install, configure and test an internet protocol network

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

ICTTEN416 - Install, configure and test an internet protocol network

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare to install IP network

  1. Prepare for given work according to relevant legislation, work health and safety (WHS) regulations, codes and standards
  2. Arrange site access according to required procedure
  3. Review existing network design documentation to ensure it is current and complete
  4. Select components and network elements required to be installed to meet the technical requirements
  5. Contact vendors and service suppliers to obtain specifications and availability of identified components
  6. Develop plans, with prioritised tasks and contingency arrangements, for installation of components with minimum disruption to client
  7. Liaise with appropriate person to obtain approval for the plans, including security clearance and timing
Prepare for given work according to relevant legislation, work health and safety (WHS) regulations, codes and standards

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Arrange site access according to required procedure

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Review existing network design documentation to ensure it is current and complete

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Select components and network elements required to be installed to meet the technical requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Contact vendors and service suppliers to obtain specifications and availability of identified components

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Develop plans, with prioritised tasks and contingency arrangements, for installation of components with minimum disruption to client

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Liaise with appropriate person to obtain approval for the plans, including security clearance and timing

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Install and configure IP network

  1. Install and configure server hardware and software according to organisational and industry standards, following plans
  2. Install and configure computer, other hardware and software, according to organisational and industry standards and plans
  3. Install and configure other software required for the network to operate with security and integrity according to the plan
Install and configure server hardware and software according to organisational and industry standards, following plans

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Install and configure computer, other hardware and software, according to organisational and industry standards and plans

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Install and configure other software required for the network to operate with security and integrity according to the plan

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Test and reconfigure IP network

  1. Test installed software and hardware, utilising available technical tools, to ensure all components are functioning as expected
  2. Test the network to ensure it is functioning according to specifications
  3. Resolve problems identified in the modified network
Test installed software and hardware, utilising available technical tools, to ensure all components are functioning as expected

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Test the network to ensure it is functioning according to specifications

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Resolve problems identified in the modified network

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete documentation and clean worksite

  1. Complete hardware and asset recording document in line with organisational requirements
  2. Document installation, boot-up and configuration procedures according to organisational requirements
  3. Tabulate test results and complete all user reports
  4. Complete client report and notify of network status
  5. Clean up and restore worksite to client’s satisfaction
  6. Secure sign-off from appropriate person
Complete hardware and asset recording document in line with organisational requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Document installation, boot-up and configuration procedures according to organisational requirements

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Tabulate test results and complete all user reports

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Complete client report and notify of network status

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Clean up and restore worksite to client’s satisfaction

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Secure sign-off from appropriate person

Completed
Date:

Teacher:		 Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare to install IP network

1.1 Prepare for given work according to relevant legislation, work health and safety (WHS) regulations, codes and standards

1.2 Arrange site access according to required procedure

1.3 Review existing network design documentation to ensure it is current and complete

1.4 Select components and network elements required to be installed to meet the technical requirements

1.5 Contact vendors and service suppliers to obtain specifications and availability of identified components

1.6 Develop plans, with prioritised tasks and contingency arrangements, for installation of components with minimum disruption to client

1.7 Liaise with appropriate person to obtain approval for the plans, including security clearance and timing

2. Install and configure IP network

2.1 Install and configure server hardware and software according to organisational and industry standards, following plans

2.2 Install and configure computer, other hardware and software, according to organisational and industry standards and plans

2.3 Install and configure other software required for the network to operate with security and integrity according to the plan

3. Test and reconfigure IP network

3.1 Test installed software and hardware, utilising available technical tools, to ensure all components are functioning as expected

3.2 Test the network to ensure it is functioning according to specifications

3.3 Resolve problems identified in the modified network

4. Complete documentation and clean worksite

4.1 Complete hardware and asset recording document in line with organisational requirements

4.2 Document installation, boot-up and configuration procedures according to organisational requirements

4.3 Tabulate test results and complete all user reports

4.4 Complete client report and notify of network status

4.5 Clean up and restore worksite to client’s satisfaction

4.6 Secure sign-off from appropriate person

Required Skills and Knowledge

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare to install IP network

1.1 Prepare for given work according to relevant legislation, work health and safety (WHS) regulations, codes and standards

1.2 Arrange site access according to required procedure

1.3 Review existing network design documentation to ensure it is current and complete

1.4 Select components and network elements required to be installed to meet the technical requirements

1.5 Contact vendors and service suppliers to obtain specifications and availability of identified components

1.6 Develop plans, with prioritised tasks and contingency arrangements, for installation of components with minimum disruption to client

1.7 Liaise with appropriate person to obtain approval for the plans, including security clearance and timing

2. Install and configure IP network

2.1 Install and configure server hardware and software according to organisational and industry standards, following plans

2.2 Install and configure computer, other hardware and software, according to organisational and industry standards and plans

2.3 Install and configure other software required for the network to operate with security and integrity according to the plan

3. Test and reconfigure IP network

3.1 Test installed software and hardware, utilising available technical tools, to ensure all components are functioning as expected

3.2 Test the network to ensure it is functioning according to specifications

3.3 Resolve problems identified in the modified network

4. Complete documentation and clean worksite

4.1 Complete hardware and asset recording document in line with organisational requirements

4.2 Document installation, boot-up and configuration procedures according to organisational requirements

4.3 Tabulate test results and complete all user reports

4.4 Complete client report and notify of network status

4.5 Clean up and restore worksite to client’s satisfaction

4.6 Secure sign-off from appropriate person

Evidence of ability to:

plan and prepare for the IP network installation task

select network elements to meet client’s business specifications

install, configure and test network elements to ensure interoperability within the network

apply network topologies, protocols and security issues

apply solutions to defined network problems.

Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.

To complete the unit requirements safely and effectively, the individual must:

explain client’s business domain, business function and organisation

describe current industry-accepted hardware and software products

outline data and voice transmission technologies and protocols

summarise networking technologies, incorporating substantial depth in some areas

explain router-based network architectures.