The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for production
|
|
Applicable OH&S, legislative and organisational requirements relevant to coopering operations are verified and complied with Completed |
Evidence:
|
Work order is reviewed, confirmed and clarified with appropriate personnel Completed |
Evidence:
|
Barrelproduction sequence is planned Completed |
Evidence:
|
Procedures are determined for checking quality at each stage of the process Completed |
Evidence:
|
Suitable work area is selected for the task Completed |
Evidence:
|
Tools and equipment suitable for the work are selected and checked for safe operation Completed |
Evidence:
|
Select and prepare components
|
|
Materials, hardware, fittings and attachments are collected Completed |
Evidence:
|
Fixing and joining devices are selected in line with work instructions and type of materials to be joined Completed |
Evidence:
|
Jigs are selected and checked for suitability of purpose Completed |
Evidence:
|
Components, including staves and heads are machined and prepared to specification Completed |
Evidence:
|
Assemble components
|
|
Components are laid out and joined using jigs, appropriate fastenings and clamping devices Completed |
Evidence:
|
Hand and/or power tools, equipment are used as required Completed |
Evidence:
|
Assembled components are checked for compliance with specifications Completed |
Evidence:
|
Components are prepared, assembled, fitted and checked as per specification Completed |
Evidence:
|
Finish the product
|
|
Product is lined in accordance with specification Completed |
Evidence:
|
Product is tested for leakage and faults are repaired Completed |
Evidence:
|
Decorative features or fittings are fitted and secured to specification Completed |
Evidence:
|
Product is sanded and prepared for coating Completed |
Evidence:
|
Product is coated in accordance with specification and intended commercial application Completed |
Evidence:
|
Clean work area/s and maintain equipment
|
|
Faulty and/or defective equipment is tagged and reported in accordance with workplace procedures Completed |
Evidence:
|
Finished products are organised and stored in holding area Completed |
Evidence:
|
Waste and scrap is removed following workplace procedures Completed |
Evidence:
|
Tools and equipment used is cleaned; inspected for serviceable condition and stored appropriately in accordance with workplace procedures Completed |
Evidence:
|
Equipment and work area clean-up is maintained in accordance with workplace procedures Completed |
Evidence:
|
Records and reports are completed to workplace requirements Completed |
Evidence:
|