The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for the work
|
|
Applicable legislative, OHS and organisational requirements relevant to sub-floor preparation are verified and complied with Completed |
Evidence:
|
Instructions and/or plans are read and interpreted to identify the process required to complete work tasks Completed |
Evidence:
|
Sub-floors are inspected to ensure that they are dry, smooth, plane, sound and clean in accordance with ASNZS 2455.2 (1995) and AS 1884 (1995) and the extent of preparation is confirmed Completed |
Evidence:
|
Trial applications of surface materials are made to determine suitability of the primer to the sub-floor, and the appropriateness of the screed compounds to level requirements, and compatibility to the primer Completed |
Evidence:
|
Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition Completed |
Evidence:
|
Material safety data sheets, or equivalent, are read and applied during the work Completed |
Evidence:
|
Materials and equipment are prepared and positioned for use Completed |
Evidence:
|
Surfaces are cleaned in accordance with manufacturer recommendation Completed |
Evidence:
|
From a datum line, define the grading, ramping and set downs
|
|
Establish grid and mark the floor Completed |
Evidence:
|
Drill for and position pin height Completed |
Evidence:
|
Clean sub-floor Completed |
Evidence:
|
Establish existing height and the height of finished ramp to the required threshold Completed |
Evidence:
|
Establish the width of the ramp appropriate to the height of the finished threshold and in accordance with building codes and client requirements Completed |
Evidence:
|
Establish existing height and the height of finished floor waste to the required threshold Completed |
Evidence:
|
Establish height of finished floor at the perimeter Completed |
Evidence:
|
Establish height of the finished floor at the floor waste/drain Completed |
Evidence:
|
Repair defects in sub-floor (including expansion joints)
|
|
Establish extent of repairs required Completed |
Evidence:
|
Remove unsound material and debris Completed |
Evidence:
|
Determine type of materials to be used Completed |
Evidence:
|
Prime affected area Completed |
Evidence:
|
Mix and install repair compound Completed |
Evidence:
|
Inspect completed work to ensure functionality is restored and the finish is plane and smooth Completed |
Evidence:
|
Treatment of expansion/control joints
|
|
Establish the extent of repair Completed |
Evidence:
|
Remove unsound material and debris to ensure the mechanics of the control/expansion joint are unimpeded Completed |
Evidence:
|
Prepare joint to ensure that repair compound does not impede the function of control/expansion joint Completed |
Evidence:
|
Prime affected area Completed |
Evidence:
|
Mix and install repair compound Completed |
Evidence:
|
Inspect completed work to ensure functionality of the control/expansion joint is not impeded Completed |
Evidence:
|
Recut the expansion/control joint as required Completed |
Evidence:
|
Apply primers and screed compounds
|
|
Surface coating is applied with the depth and coverage in accordance with manufacturer specifications and job requirements Completed |
Evidence:
|
Levelled floor is checked and cleared for further processing Completed |
Evidence:
|
Complete housekeeping
|
|
Unused materials are stored or recycled as required Completed |
Evidence:
|
Tools and equipment are cleaned and stored appropriately Completed |
Evidence:
|
Work area is cleaned and rubbish disposed of appropriately Completed |
Evidence:
|
Workplace documentation and/or reporting is completed Completed |
Evidence:
|