The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Identify and prepare for work requirements
|
|
Applicable legislative, OHS and organisational requirements relevant to the application of finishes are verified and complied with Completed |
Evidence:
|
Instructions and/or plans are read and interpreted to identify process required to complete work tasks Completed |
Evidence:
|
Stain and filling material is selected with regard to durability, longevity, aesthetics, manufacturer recommendations and client expectations Completed |
Evidence:
|
Selected stain and filler materials are assessed as being compatible with each other, with the surface to be finished, and with manufacturer recommendations Completed |
Evidence:
|
Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition Completed |
Evidence:
|
Products with surface or other faults are identified and faults repaired as appropriate. Completed |
Evidence:
|
Surface to be stained and or filled is inspected and assessed as being ready for coating with the selected stain/filler Completed |
Evidence:
|
Work sequence is planned to ensure efficiency and quality of application Completed |
Evidence:
|
Workplace health and safety requirements, including isolation, ventilation and other personal protection needs, are observed throughout the work Completed |
Evidence:
|
Apply finishing system
|
|
Ventilation is checked before chemical fumes are released, and all OHS requirements are met including use of personal protective equipment Completed |
Evidence:
|
Environmental protection regulations are complied with Completed |
Evidence:
|
Staining and or filling material is prepared as per manufacturer specifications. Completed |
Evidence:
|
Trial applications of stains and or fillers are made to check equipment operation, materials consistency, viscosity and specified colour Completed |
Evidence:
|
Faults and or inconsistencies in colour are identified and workplace procedures for rectification and adjustment are followed Completed |
Evidence:
|
Staining and or filling material is applied in accordance with manufacturer recommendations Completed |
Evidence:
|
Recommended drying times between coats are observed Completed |
Evidence:
|
Buffing or sanding between coats, where required, is carried out according to manufacturer recommendations Completed |
Evidence:
|
Finished products are inspected and approved for suitability for further processing Completed |
Evidence:
|
Final finish meets the requirements of the job Completed |
Evidence:
|
Complete housekeeping
|
|
Unused materials are resealed and stored Completed |
Evidence:
|
Tools and equipment are cleaned, maintained and stored Completed |
Evidence:
|
Work area is cleaned and waste material is removed and disposed of safely Completed |
Evidence:
|
Barriers and signs are removed and stored Completed |
Evidence:
|
Workplace documentation/reporting is completed Completed |
Evidence:
|