NTISthis.com

Evidence Guide: LMFFM1002B - Operate basic woodworking machines

Student: __________________________________________________

Signature: _________________________________________________

Tips for gathering evidence to demonstrate your skills

The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!

From the Wiki University

 

LMFFM1002B - Operate basic woodworking machines

What evidence can you provide to prove your understanding of each of the following citeria?

Prepare for work

  1. Work instructions are used to identify job requirements, including quality, materials, equipment, and quantities
  2. Workplace health and safety requirements, including ventilation requirements and personal protection needs, are observed throughout the work
  3. Material for machining is selected and inspected for quality
  4. Machines, cutting tools and jigs are identified and checked for safe and effective operation
Work instructions are used to identify job requirements, including quality, materials, equipment, and quantities

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Workplace health and safety requirements, including ventilation requirements and personal protection needs, are observed throughout the work

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Material for machining is selected and inspected for quality

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Machines, cutting tools and jigs are identified and checked for safe and effective operation

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Operate machines

  1. Safety equipment, including emergency stops, gauges, guards and controls are checked
  2. Machine start-up procedure is carried out in accordance with manufacturers' instructions
  3. Material is fed into machine in accordance with manufacturers' instructions, safe handling procedures and standard workplace operating procedures
  4. Machine is operated in accordance with its designed capacity and purpose, tooling requirements and to manufacturers' recommendations
  5. Machine operation is monitored to ensure product quality and output
  6. Waste quantities are checked and minimised
  7. Items that do not meet quality requirements are recycled or discarded according to workplace procedures
  8. Problems with the required work and/or the operation of the machine are identified and reported to appropriate persons
Safety equipment, including emergency stops, gauges, guards and controls are checked

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Machine start-up procedure is carried out in accordance with manufacturers' instructions

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Material is fed into machine in accordance with manufacturers' instructions, safe handling procedures and standard workplace operating procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Machine is operated in accordance with its designed capacity and purpose, tooling requirements and to manufacturers' recommendations

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Machine operation is monitored to ensure product quality and output

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Waste quantities are checked and minimised

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Items that do not meet quality requirements are recycled or discarded according to workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Problems with the required work and/or the operation of the machine are identified and reported to appropriate persons

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Clean up work area and maintain equipment

  1. Material that can be reused is collected and stored
  2. Waste and scrap are removed following workplace procedures
  3. Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures
  4. Unserviceable equipment is reported in accordance with workplace procedures
Material that can be reused is collected and stored

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Waste and scrap are removed following workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Unserviceable equipment is reported in accordance with workplace procedures

Completed
Date:

Teacher:
Evidence:

 

 

 

 

 

 

 

Assessed

Teacher: ___________________________________ Date: _________

Signature: ________________________________________________

Comments:

 

 

 

 

 

 

 

 

Instructions to Assessors

Evidence Guide

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Critical Aspects of Evidence

Identify work requirements

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Identify materials used in the work process

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment and products

maintain required production output and product quality

Operate and monitor the machines and complete the tasks identified in the Range Statement for:

one saw

one planer

one drill

one sander

Work effectively with others

Resource Implications

Access to basic woodworking machinery as identified in the Range Statement, standard operating procedures, and unprocessed materials.

Method of Assessment

Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts.

Assessment should be by direct observation of tasks and questioning on underpinning knowledge.

Assessment should be conducted over time and may be in conjunction with assessment of other units of competency.

Context of Assessment

Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.

Required Skills and Knowledge

Required skills

collect, organise and understand information related to work orders, machine operations, basic plans and safety procedures

communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems

plan and organise activities, including the preparation of the worksite and the obtaining of equipment and materials to avoid any back tracking, or wastage

work with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity

apply basic arithmetical processes

use checking techniques to identify, avoid or solve work problems

use the workplace technology related to machine operations, including tools, equipment and basic measuring devices

Required knowledge

the characteristics, uses and limitations of basic woodworking machines

general workplace quality standards and procedures

workplace safety policies and procedures

procedures for reporting machinery faults and material defects

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

The unit scope is to cover a minimum of one saw, one planer, one drill and one sander and related tasks from the following list:

cross cut saw

docking (oversize + 20mm)

docking (accurate to +/- 0.25mm)

docking square (no tolerance)

rip saw

parallel rip (oversize by 5mm+)

scroll band saw

off fence ripping

freehand ripping

freehand curve cutting

panel saw

cut flat panel board (off rip fence using scribe saw)

cut flat panel board (off cross-cut fence using scribe saw)

surface planer (buzzer/jointer)

machine face

machine edge

panel planer (thicknesser)

parallel plane width

parallel plane thickness

bobbin sander

sand concave surface

disc sander

sand straight surface

sand end grain

belt sander (linisher)

sand flat surfaces

vertical drill press

drill holes to pre-determined depths vertically

select and replace drill bits

hinge boring

horizontal borer (single bit)

drill holes to pre-determined depths horizontally

select and replace drill bits

Unit context

OH&S requirements include legislation, building codes, material safety management systems, hazardous substances and dangerous goods code and local safe operating procedures

Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

Competency may be demonstrated in workplaces involved in the manufacture of solid timber furniture, domestic furniture, commercial furniture, kitchen and bathroom cabinets and/or furniture components

Material to be machined may include but is not limited to:

solid timber and manufactured board

Personal protective equipment

Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices

Information and procedures

Workplace procedures relating to the use of tools and equipment

Work instructions, including job sheets, cutting lists, plans, drawings and designs

Workplace procedures relating to reporting and communication

Manufacturers' specifications and operational procedures