The important thing to remember when gathering evidence is that the more evidence the better - that is, the more evidence you gather to demonstrate your skills, the more confident an assessor can be that you have learned the skills not just at one point in time, but are continuing to apply and develop those skills (as opposed to just learning for the test!). Furthermore, one piece of evidence that you collect will not usualy demonstrate all the required criteria for a unit of competency, whereas multiple overlapping pieces of evidence will usually do the trick!
From the Wiki University
What evidence can you provide to prove your understanding of each of the following citeria?
Prepare for assembly
|
|
Work instructions are used to determine job requirements, including design, tolerances, process, materials, finish and quantity Completed |
Evidence:
|
Assembly sequence are planned Completed |
Evidence:
|
Procedures are determined for checking quality at each stage of the process Completed |
Evidence:
|
Workplace health and safety requirements, including personal protection needs, are observed throughout the work Completed |
Evidence:
|
Suitable work area is selected for the task Completed |
Evidence:
|
Tools and equipment suitable to the fixing method are selected and checked for safe operation Completed |
Evidence:
|
Components, hardware, fittings and attachments are collected Completed |
Evidence:
|
Fixing and joining devices are selected in line with work instructions and type of materials to be joined Completed |
Evidence:
|
Jigs are selected and checked for suitability of purpose Completed |
Evidence:
|
Assemble components
|
|
Components are laid out and joined using jigs and appropriate fastenings Completed |
Evidence:
|
Hand and/or power tools and equipment are used as required Completed |
Evidence:
|
Assembled frame is checked for compliance with specifications Completed |
Evidence:
|
Components are prepared, assembled and fitted as per specification Completed |
Evidence:
|
Frames which do not meet quality specifications are repaired or tagged for further processing or recycling/disposal Completed |
Evidence:
|
Finished products are organised and stored in holding area Completed |
Evidence:
|
Clean work area and maintain equipment
|
|
Faulty and/or defective equipment is tagged and reported in accordance with workplace procedures Completed |
Evidence:
|
Waste and scrap are removed following workplace procedures Completed |
Evidence:
|
Tools and equipment used are cleaned, inspected for serviceable condition and stored appropriately in accordance with workplace procedures Completed |
Evidence:
|
Equipment and work area clean-up is maintained in accordance with workplace procedures Completed |
Evidence:
|